Miniature Aluminum Electrolytic Capacitors RADIAL LEADS, POLARIZED, STANDARD CASE SIZING NRSS NRSA (reduced sizes) (today’s standard) NRSA Series RoHS Compliant includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS 6.3 ~ 100 VDC 0.47 ~ 10,000µF -40 ~ +85°C + 20% (M) 0.03CV or 4µA , whichever is greater 0.01CV or 3µA , whichever is greater W.V. (Vdc) 6.3 10 16 25 35 50 63 100 S.V. (Vdc) 8 13 20 32 44 63 79 125 C < 1,000µF 0.24 0.20 0.16 0.14 0.12 0.10 0.10 0.10 C = 2,200µF 0.24 0.21 0.18 0.16 0.14 0.12 0.11 C = 3,300µF 0.26 0.23 0.20 0.18 0.16 0.14 0.13 C = 4,700µF 0.28 0.25 0.22 0.20 0.18 0.20 C = 6,800µF 0.32 0.29 0.26 0.24 C = 10,000µF 0.40 0.37 0.34 0.32 Z-25°C/Z+20°C 4 3 2 2 2 2 2 2 Z-40°C/Z+20°C 10 8 6 4 3 3 3 3 Capacitance Change Within +20% of initial measured value Tan δ Less than 200% of specified maximum value Leakage Current Less than specified maximum value Capacitance Change Within +20% of initial measured value Tan δ Less than 200% of specified maximum value Leakage Current Less than specified maximum value Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance After 1 min. Max. Leakage Current @ (20oC) After 2 min. Max. Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. 85°C 2,000 Hours Shelf Life Test 85°C 1,000 Hours No Load Note: Capacitors shall conform to JIS-C-5141, unless otherwise specified here. MAXIMUM ESR (Ω AT 120HZ AND 20OC) PERMISSIBLE RIPPLE CURRENT (mA rms AT 120HZ AND 85OC) ��� �µ�� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� ��� ��� ����� ����� ����� ����� ����� ����� ������ ������� ������� ����� ��� � � � � � � � � � � � � ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� �� � � � � � � � � �� ��� ��� ��� ��� ��� � ��� ��� ���� ���� ���� ���� ���� �� � � � � � �� �� �� �� ��� ��� ��� ��� ��� � ��� ���� ���� ���� ���� ���� ���� �� � � � � � �� �� ��� ��� ��� ��� ��� ��� � ��� ���� ���� ���� ���� ���� ���� �� � � � � � �� �� �� ��� ��� ��� ��� ��� ��� � ��� ���� ���� ���� ���� � � �� �� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� � ���� ���� ���� ���� ���� � � �� � � � � �� �� ��� ��� ��� ��� ��� ��� ��� ��� � ���� ���� ���� ���� � � � PRECAUTIONS ��� �� �� �� �� �� �� ��� ��� ��� ��� ��� ��� ��� ��� � � � � � � � � Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] ® NIC COMPONENTS CORP. www.niccomp.com ��� �µ�� ���� ��� ��� ��� ��� �� �� �� �� ��� ��� ��� ��� ��� ��� ����� ����� ����� ����� ����� ����� ������ ������� ������� ����� �� �� �� �� �� ��� ��� � � � � � ��� � � � � � ���� � � � � � ���� � � � � � ���� � � � � � ���� ���� � ���� � � ���� ���� ���� ���� � � ���� ���� ���� ���� � � ���� ���� ���� ���� ���� � ���� ���� ���� ���� ���� � ����� ���� ���� ���� ���� � ����� ����� ���� ���� ���� � ����� ����� ����� ����� ����� ���� ����� ����� ����� ����� ����� ����� � � � � � ����� ����� ����� ����� ����� ����� ����� ����� ����� ����� ����� ����� ����� ����� ����� ������ ����� ����� ����� ����� ������ ������ ������ ����� ����� ������ ������ ������ ������ ������ ���� � � ������ ������ ������ ����� � � ������ ������ ������ ������ �� � � � � ���� ���� ���� ���� ���� ���� ����� ����� ����� ����� � ����� ����� ����� ����� � � � ��� ��� ��� ���� ���� ���� ���� ���� ���� ���� ���� ����� ����� ����� ����� � � � � � � � � RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency (Hz) ~ 47µF 100 ~ 470µF 1000µF ~ 2200 ~ 10000µF www.lowESR.com 50 0.75 0.80 0.85 0.85 120 1.00 1.00 1.00 1.00 300 1.35 1.23 1.10 1.03 www.RFpassives.com 1K 1.57 1.34 1.13 1.05 10K 2.00 1.50 1.15 1.08 www.SMTmagnetics.com 45 Miniature Aluminum Electrolytic Capacitors NRSA Series STANDARD PRODUCTS AND CASE SIZE TABLE: D φ x L (mm) Cap (µF) Code 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10,000 R47 1R0 2R2 3R3 4R7 100 220 330 470 101 151 221 331 471 681 102 152 222 332 472 682 103 Working Voltage (WVDC) 6.3 10 16 25 35 50 63 6.3 x 11 8 x 11.5 10x12.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 20 16 x 25 16 x 25 16 x 31 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 36 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 25 16 x 25 16 x 31 18 x 36 22 x 36 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 36 22 x 36 22 x 36 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 25 16 x 31 18 x 36 22 x 36 - 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 16 x 31 18 x 36 22 x 36 22 x 42 - 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 31 18 x 36 18 x 36 22 x 42 - 100 5 x 11 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 20 16 x 25 16 x 25 16 x 31 - DIMENSIONS (mm) LEAD SPACING AND DIAMETER (mm) Case Dia. (D∅) 5 6.3 8 10 12.5 16 18 22 Leads Dia. (d∅) Lead Spacing (F) Dim. α 0.5 2.0 0.5 0.5 2.5 0.5 0.6 3.5 0.5 0.6 5.0 0.5 0.6 5.0 0.5 0.8 7.5 0.5 0.8 7.5 0.5 0.8 10 1.0 Polarity Marking Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α PART NUMBERING SYSTEM NRSA 101 M 25V 6.3X11 TR F RoHS Compliant Tape and Reel* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series *see tape specification for details ® 46 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com