New Product AU1PD thru AU1PM www.vishay.com Vishay General Semiconductor Surface Mount Ultrafast Avalanche Rectifiers FEATURES • Very low profile - typical height of 1.0 mm ® eSMP Series • Ideal for automated placement • Glass passivated chip junction • Ultrafast recoveray times for high frequency • Low reverse current • Meets MSL level 1, per LF maximum peak of 260 °C J-STD-020, • AEC-Q101 qualified DO-220AA (SMP) • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 200 V to 1000 V IFSM 30 A, 25 A trr 75 ns IR 1 μA EAS 20 mJ TJ max. 175 °C • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds of AC/AC and DC/DC converters in high temperature conditions for both consumer and automotive applications. Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code AU1PD AU1PG AU1PJ AU1PK AU1PM AUD AUG AUJ AUK AUM 200 400 600 800 1000 UNIT Maximum repetitive peak reverse voltage VRRM Average forward current IF(AV) Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM Non-repetitive avalanche energy at IAS = 1.0 A, TA = 25 °C EAS 20 mJ TJ, TSTG - 55 to + 175 °C Operating junction and storage temperature range Revision: 30-Sep-11 1.0 30 V A 25 A Document Number: 89291 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product AU1PD thru AU1PM www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage IF = 1.0 A Maximum reverse current Rated VR AU1PD AU1PG VF (1) TA = 125 °C TA = 25 °C AU1PJ AU1PM 1.85 1.4 1.6 1.0 μA 75 CJ UNIT V 100 trr 4.0 V, 1 MHz AU1PK 1.5 IR (2) TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum reverse recovery time Typical junction capacitance SYMBOL TA = 25 °C ns 11 7.5 pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance AU1PD AU1PG AU1PJ RJA (1) 132 RJM (1) 15 AU1PK AU1PM UNIT °C/W Note (1) Free air, mounted on recommended copper pad area. Thermal resistance R JA - junction to ambient, RJM - junction to mount at the terminal cathode band ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE AU1PJ-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel AU1PJ-M3/85A 0.024 85A 10 000 13" diameter plastic tape and reel AU1PJHM3/84A (1) 0.024 84A 3000 7" diameter plastic tape and reel (1) 0.024 85A 10 000 13" diameter plastic tape and reel AU1PJHM3/85A Note Automotive grade (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1.6 Resistive or Inductive Load AU1PD thru AU1PJ AU1PD thru AU1PJ 1.4 1.0 Average Power Loss (W) Average Forward Rectified Current (A) 1.2 0.8 AU1PK thru AU1PM 0.6 0.4 0.2 0 100 TM Measured at the Cathode Band Terminal D = 0.5 D = 0.8 D = 0.3 D = 0.2 1.2 D = 1.0 D = 0.1 1.0 0.8 0.6 T 0.4 0.2 D = tp/T tp 0.8 1.0 0 110 120 130 140 150 160 170 180 0 0.2 0.4 0.6 1.2 TM - Mount Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 30-Sep-11 Document Number: 89291 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product AU1PD thru AU1PM www.vishay.com Vishay General Semiconductor 1000 1.6 Average Power Loss (W) 1.4 D = 0.5 D = 0.3 D = 0.8 Instantaneous Reverse Current (μA) AU1PK thru AU1PM D = 0.2 1.2 D = 1.0 D = 0.1 1.0 0.8 0.6 T 0.4 0.2 D = tp/T tp TA = 125 °C 10 TA = 75 °C 1 TA = 25 °C 0.1 AU1PD thru AU1PJ 0.01 0 0.2 0 0.4 0.8 0.6 1.0 1.2 10 30 40 50 60 70 80 90 Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Typical Reverse Characteristics 100 Instantaneous Reverse Current (μA) 1000 TA = 175 °C TA = 125 °C 1 TA = 75 °C TA = 25 °C AU1PD thru AU1PJ 0.1 0.4 0.8 1.2 1.6 2.0 2.4 TA = 175 °C 100 TA = 125 °C 10 TA = 75 °C 1 0.1 TA = 25 °C AU1PK thru AU1PM 0.01 2.8 10 20 30 40 50 60 70 Fig. 4 - Typical Instantaneous Forward Characteristics 90 100 Fig. 7 - Typical Reverse Characteristics 100 10 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TA = 125 °C TA = 75 °C 0.1 TA = 25 °C Junction Capacitance (pF) TA = 175 °C 1 80 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) 20 Average Forward Current (A) 10 Instantaneous Forward Current (A) TA = 175 °C 100 10 AU1PD thru AU1PJ AU1PK thru AU1PM AU1PK thru AU1PM 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 1 0.1 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 5 - Typical Instantaneous Forward Characteristics Fig. 8 - Typical Junction Capacitance Revision: 30-Sep-11 100 Document Number: 89291 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product AU1PD thru AU1PM www.vishay.com Vishay General Semiconductor Transient Thermal Impedance (°C/W) 1000 Junction to Ambient 100 10 1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 9 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF. Cathode Band 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.036 (0.91) 0.024 (0.61) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.158 (4.00) 0.146 (3.70) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) Revision: 30-Sep-11 0.025 0.030 (0.635) (0.762) 0.100 (2.54) 0.050 (1.27) Document Number: 89291 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000