M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS 125 MHz 6.0 VDC Lower Frequency: Upper Frequency: 200 MHz Tuning Voltage: 0 Supply Voltage: 4.75 5.0 5.25 VDC 0 +5.0 +10.0 dBm 8 15 mA Output Power: Supply Current: nd Harmonic Suppression (2 Harmonic): -15 Pushing: 3.0 6.0 MHz/V Pulling, all Phases: 3.0 5.0 MHz pk-pk Tuning Sensitivity: dBc 14 MHz/V Phase Noise @ 10kHz offset: -100 -97 dBc/Hz Phase Noise @ 100kHz offset: -122 -119 dBc/Hz 100 pF Load Impedance: 50 Input Capacitance: Operating Temperature Range: -40 +85 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M ICROWAVE A Division of Crystek Corporation Gold Finish BOTTOM VIEW 0.080 (2.03) [RF] SIDE VIEW Solder Mask 0.020 (0.51) 0.079 (2.01) 0.015 (0.38) 0.025 0.050 (0.64) (1.27) [Vt] BOTTOM ORIENTATION MARK TOP VIEW 0.240 10 0.180 11 9 8 7 6 0.240 5 0.180 4 0.120 PAD LOCATION 0.120 12 0 0 1 2 3 0.240 CRYSTEK CVCO33CL 0125-0200 YYWW 0.180 0.300 (7.62) 0.300 (7.62) 0.240 0.030 (0.76) 0.120 0.030 (0.76) 0.015 (0.38) 0.180 0.060 (1.52) 0.120 [Vcc] Pad Connection 1 8 11 Others Vt RF-OUTPUT Vcc GROUND Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches TOP ORIENTATION MARK TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) DIRECTION OF FEED 0.630±0.012 (16.00±0.30) 0.472 (12.00) Drawing not to scale Product Control: Crystek Part Number: CVCO33CL-0125-0200 Release Date: 14-Nov-12 Revision Level: F Responsible: C. Vales CRYSTEK CORPORATION Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com