PR2001G - PR2007G 2.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features · · · · · Glass Passivated Die Construction Fast Switching for High Efficiency Surge Overload Rating to 80A Peak B A Lead Free Finish, RoHS Compliant (Note 4) C Mechanical Data · · · · · · · · A Low Reverse Leakage Current D Case: DO-15 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 DO-15 Dim Min Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208 e3 A 25.40 ¾ B 5.50 7.62 Polarity: Cathode Band C 0.686 0.889 D 2.60 3.60 Moisture Sensitivity: Level 1 per J-STD-020C Marking: Type Number Ordering Information: See Page 3 Max All Dimensions in mm Weight: 0.4 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PR PR PR PR PR PR PR Symbol 2001G 2002G 2003G 2004G 2005G 2006G 2007G Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IO 2.0 A IFSM 80 A Forward Voltage Drop @ IF = 2.0A VFM 1.3 V @ TA = 25°C @ TA = 100°C IRM 5.0 100 mA Peak Reverse Current at Rated DC Blocking Voltage (Note 5) Reverse Recovery Time (Note 3) trr Typical Total Capacitance (Note 2) CT 35 pF RqJA 50 °C/W Tj, TSTG -65 to +150 °C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 150 250 500 ns 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. 5. Short duration pulse test used to minimize self-heating effect. DS27005 Rev. 4 - 2 1 of 3 www.diodes.com PR2001G - PR2007G ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 2.0 1.6 1.2 0.8 0.4 Single phase half-wave 60 Hz resistive or inductive load 0 25 50 75 100 125 150 175 1.0 0.1 o Tj = 25 C 0.01 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 200 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 90 100 Tj = 25°C f = 1.0MHz Single Half-Sine-Wave CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 10 60 30 10 1 0 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27005 Rev. 4 - 2 2 of 3 www.diodes.com PR2001G - PR2007G Ordering Information Notes: (Note 6) Device Packaging Shipping PR2001G-T DO-15 4K/Tape & Reel, 13-inch PR2002G-T DO-15 4K/Tape & Reel, 13-inch PR2003G-T DO-15 4K/Tape & Reel, 13-inch PR2004G-T DO-15 4K/Tape & Reel, 13-inch PR2005G-T DO-15 4K/Tape & Reel, 13-inch PR2006G-T DO-15 4K/Tape & Reel, 13-inch PR2007G-T DO-15 4K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS27005 Rev. 4 - 2 3 of 3 www.diodes.com PR2001G - PR2007G