AZ100LVEL32 PECL/ECL ÷2 Divider www.azmicrotek.com FEATURES DESCRIPTION • • • The AZ100LVEL32 is an integrated ÷2 divider. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random logic state; the reset allows for the synchronization of multiple AZ100LVEL32’s in a system. • 3.0+ GHz toggle frequency 470ps propagation delay Internal input pulldown resistors 3.0V to 5.5V power supply The AZ100LVEL32 is a direct replacement for the On Semiconductor MC100EL/LVEL32 BLOCK DIAGRAM APPLICATIONS • General Applications PACKAGE AVAILABILITY • • • • Part Number (PN) MLP8 MSOP8 SOIC8 Green/RoHS Compliant/Pb-Free Package Marking AZ100LVEL32NG MLP 8 C2G <Date Code>2 AZ100LVEL32TG1 MSOP 8 AZHGLV322 AZ100LVEL32DG1 SOIC 8 AZM100GLVEL3,2 1 1 Tape & Reel - Add 'R1' at end of PN for 7in (1k parts), 'R2' (2.5k) for 13in 2 See www.azmicrotek.com for date code format www.azmicrotek.com +1-480-962-5881 Request a Sample 1630 S Stapley Dr, Suite 127 Mesa, AZ 85204 USA May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider PIN DESCRIPTION AND CONFIGURATION Table 1 - Pin Description for AZ100LVEL32N Pin Name Type Function 1 RESET Input Asynchronous Reset 2 CLK Input Clock Input 3 CLK ¯¯¯ Input Inverting Clock Input 4 VBB Output Reference Voltage 5 VEE Power Negative Supply 6 Q̄ Output Inverting PECL Output 7 Q Output PECL Output 8 VCC Power Positive Supply Figure 1 - Pin Configuration AZ100LVEL32N Table 2 - Pin Description for AZ100LVEL32T & AZ100LVEL32D Pin Name Type Function 1 RESET Input Asynchronous Reset 2 CLK Input Clock Input 3 CLK ¯¯¯ Input Inverting Clock Input 4 VBB Output Reference Voltage 5 VEE Power Negative Supply 6 Q̄ Output Inverting PECL Output 7 Q Output PECL Output 8 VCC Power Positive Supply Figure 2 - Pin Configuration AZ100LVEL32T & AZ100LVEL32D www.azmicrotek.com +1-480-962-5881 Request a Sample 2 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider ENGINEERING NOTES The AZ100LVEL32 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the CLK/CLK ¯¯¯¯ differential input pair. The input signal is then fed to the other CLK/CLK ¯¯¯¯ input. The VBB pin should be used only as a bias for the AZ100LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01µF capacitor. CLK RESET Q Figure 3 - Timing Diagram 900 800 700 600 500 400 300 200 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 Figure 4 - Typical Large Signal Output Swing Measured with 750mV input, output terminated to VCC-2V via 50Ω resistors www.azmicrotek.com +1-480-962-5881 Request a Sample 3 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider PERFORMANCE DATA Table 3 – Absolute Maximum Ratings Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol Characteristic Condition Rating Unit VCC PECL Power Supply VEE = 0V 0 to + 6.0 V VI_PECL PECL Input Voltage VEE = 0V 0 to + 6.0 V VEE ECL Power Supply VCC = 0V -6.0 to 0 V VI_ECL ECL Input Supply V VCC = 0V -6.0 to 0 Continuous 50 Surge 100 IOUT Output Current mA TA Operating Temperature Range - -40 to +85 °C TSTG Storage Temperature Range - -65 to +150 °C ESDHBM Human Body Model Electro Static Discharge - 2500 V ESDMM Machine Model Electro Static Discharge - 200 V ESDCDM Charged Device Model Electro Static Discharge - 2000 V Table 4 - ECL DC Characteristics ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND) Symbol Characteristic VOH VOL Output LOW Voltage VIH Input HIGH Voltage VIL Input LOW Voltage VBB Reference Voltage IIH Input HIGH Current IIL IEE -40°C 25°C 85°C Unit Min Max Min Max Min Max Min Max Output HIGH Voltage1 -1085 -880 -1025 -880 -1025 -880 -1025 -880 mV 1 -1830 -1555 -1810 -1620 -1810 -1620 -1810 -1620 mV -1165 -880 -1165 -880 -1165 -880 -1165 -880 mV -1810 -1475 -1810 -1475 -1810 -1475 -1810 -1475 mV -1380 -1260 -1380 -1260 -1380 -1260 -1380 -1260 mV 150 µA 150 150 150 Input LOW Current CLK -150 -150 -150 -150 Input LOW Current RESET 0.5 0.5 0.5 0.5 Power Supply Current 1 0°C 30 30 30 µA 35 mA Specified with each output terminated through 50Ω resistors to VCC - 2V. www.azmicrotek.com +1-480-962-5881 Request a Sample 4 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider Table 5 - LVPECL DC Characteristics LVPECL DC Characteristics (VEE = GND, VCC = +3.3V) Symbol Characteristic VOH VOL -40°C Unit Min Max Min Max Min Max Output HIGH Voltage1,2 2215 2420 2275 2420 2275 2420 2275 2420 mV 1,2 1470 1745 1490 1680 1490 1680 1490 1680 mV 1 2135 2420 2135 2420 2135 2420 2135 2420 mV 1 1490 1825 1490 1825 1490 1825 1490 1825 mV 1920 2040 1920 2040 1920 2040 1920 2040 mV 150 µA VIL Input LOW Voltage VBB Reference Voltage 1 IIH Input HIGH Current IEE 85°C Max Input HIGH Voltage IIL 25°C Min Output LOW Voltage VIH 0°C 150 150 150 Input LOW Current CLK -150 -150 -150 -150 Input LOW Current RESET 0.5 0.5 0.5 0.5 Power Supply Current 30 30 µA 30 1 For supply voltages other than 3.3V, use the ECL table values and ADD supply voltage value 2 Specified with each output terminated through 50Ω resistors to VCC - 2V. 35 mA Table 6 - PECL DC Characteristics PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol Characteristic VOH VOL -40°C Unit Min Max Min Max Min Max Output HIGH Voltage1,2 3915 4120 3975 4120 3975 4120 3975 4120 mV 1,2 3170 3445 3190 3380 3190 3380 3190 3380 mV 1 3835 4120 3835 4120 3835 4120 3835 4120 mV 1 3190 3525 3190 3525 3190 3525 3190 3525 mV 3620 3740 3620 3740 3620 3740 3620 3740 mV 150 µA VIL Input LOW Voltage VBB Reference Voltage 1 IIH Input HIGH Current IEE 85°C Max Input HIGH Voltage IIL 25°C Min Output LOW Voltage VIH 0°C 150 150 150 Input LOW Current CLK -150 -150 -150 -150 Input LOW Current RESET 0.5 0.5 0.5 0.5 Power Supply Current 30 30 30 1 For supply voltages other than 3.3V, use the ECL table values and ADD supply voltage value 2 Specified with each output terminated through 50Ω resistors to VCC - 2V. www.azmicrotek.com +1-480-962-5881 Request a Sample µA 35 mA 5 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider AC Characteristics (VEE = -3.0V to -5.5V; VCC=GND or VEE=GND; VCC = +3.0V to +5.5V) -40°C Symbol Characteristic fMAX Maximum Toggle Frequency Min Typ 0°C Max 2.6 Min Typ 25°C Max 2.6 Min Typ 85°C Max 2.6 Min Typ Max 2.6 Unit GHz Propagation Delay tPLH/tPHL CLK/ to Q/1 RESET to Q/ 1 360 450 540 370 460 550 380 470 560 400 490 580 ps 390 540 690 440 540 640 440 540 640 450 550 650 ps 5 20 5 20 5 20 5 20 ps 2 tSKEW Duty Cycle Skew 3 Input Swing VPP (AC) Differential Single Ended 4 Common Mode Range VPP < 500mV VCMR VPP ≥ 500mV 2 150 1000 150 1000 150 1000 150 1000 mV 300 2000 300 2000 300 2000 300 2000 mV VEE+ VCC - VEE+ VCC - VEE+ VCC - VEE+ VCC - 1.2 0.4 1.1 0.4 1.1 0.4 1.1 0.4 V 1.4 0.4 1.3 0.4 1.3 0.4 1.3 0.4 V 100 260 100 260 100 260 100 260 ps 1 Output Rise/Fall tr/tf (20%-80%) VPP is the peak-to-peak differential input swing for which AC parameters are guaranteed. 2 VCMR is defined as the range within which the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level must be such that VPP is within the differential input swing range specified www.azmicrotek.com +1-480-962-5881 Request a Sample 6 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider PACKAGE DIAGRAM MLP8 Green/RoHS compliant/Pb-Free MSL=1 www.azmicrotek.com +1-480-962-5881 Request a Sample 7 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider PACKAGE DIAGRAM MSOP8 Green/RoHS compliant/Pb-Free MSL=1 www.azmicrotek.com +1-480-962-5881 Request a Sample 8 May 2012, Rev 2.0 Arizona Microtek, Inc. AZ100LVEL32 PECL/ECL ÷2 Divider PACKAGE DIAGRAM SOIC8 Green/RoHS compliant/Pb-Free MSL=1 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. www.azmicrotek.com +1-480-962-5881 Request a Sample 9 May 2012, Rev 2.0