LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT TAPE AND REEL Pb Lead-Free Parts LSR9033-HH/T/TR3-08 DATA SHEET DOC. NO : QW0905-LSR9033-HH/T/TR3-08 REV. : A DATE : 16- Aug. - 2011 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/7 PART NO. LSR9033-HH/T/TR3-08 Package Dimensions Cathode 0.4± 0.1 0.5± 0.1 2.0 2.5 ψ1.9 1.4 0.76MAX 2.8 0.31TYP 0.13TYP 0.61TYP 1.07TYP 7.62MAX Note : 1.All dimension are in millimeter tolerance is ± 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 0.35 2.52 7.84 9.3 12.0±0.3 Polarity 5.5 1.75 2.0 Note : The tolerances unless mentioned is ±0.2mm, Unit=mm. 4.0 ψ1.5 3.37 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSR9033-HH/T/TR3-08 Page 2/7 Reel Dimensions 16.0±1.0 ψ178±2.0 14.2±1.0 74.0±1.5 Part No. Description Quantity/Reel LSR9033-HH/T/TR3-08 12.0mm tape,7"reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSR9033-HH/T/TR3-08 Page 3/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT Red Forward Current IF 15 mA Peak Forward Current Duty 1/10@10KHz IFP 70 mA Power Dissipation PD 50 mW Reverse Current @5V Ir 10 μA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO MATERIAL Emitted LSR9033-HH/T/TR3-08 GaAlAs Red Forward Luminous Viewing Peak Spectral voltage intensity wave halfwidth angle length △λ nm @ 0.7mA(V) @0.7mA(mcd) 2θ 1/2 λPnm (deg) Lens Water Clear 660 20 Min. Typ. Min. Typ. 1.5 65 Note : 1.The forward voltage data did not including ± 0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 2.1 120 20 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSR9033-HH/T/TR3-08 Page 4/7 Typical Electro-Optical Characteristics Curve SR CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.0 2.0 3.0 4.0 1.0 5.0 1.2 Fig.4 Relative Intensity vs. Temperature Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 3.0 2.5 2.0 1.5 1.0 0.5 0.0 100 -40 -20 0 20 40 60 80 100 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 1000 Forward Current(mA) Forward Voltage(V) -40 100 10 Fig.6 Directive Radiation 1.0 0° -30 ° 0.5 30° -60 ° 60° 0.0 600 650 700 Wavelength (nm) 750 100% 75% 50% 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSR9033-HH/T/TR3-08 Page 5/7 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245±5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3. LEAD Reflow Solder Temp. (℃) 240 Rising +5℃ /sec Cooling -5 ℃/sec Preheat 150 120 60 ~ 120 sec Time 5sec 4. PB-Free Reflow Solder 1~5° C/sec Preheat 180~200 ° C 1~5° C/sec 260° C MaX. 10sec.Max Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Wave solder and reflow soldering should not be made more than one time. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSR9033-HH/T/TR3-08 Page 6/7 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSR9033-HH/T/TR3-08 Page 7/7 Reliability Test: Classification Test Item Test Condition Reference Standard Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=1000hrs ±2hrs Endurance Test Thermal Shock Test Solderability Test Environmental Test Temperature Cycling IR Reflow 1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface 1.105 ℃ ~ 25℃ ~ - 55℃ ~ 25℃ 30mins 5mins 30mins 5mins 2.10 Cyeles 1.T=260¢XC Max. 10sec.Max. 2. 6 Min MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020