AD ABLS-3.6864MHZ-L4Q-T Evaluation board for fsk ad5700/ad5700-1 hart modem Datasheet

Evaluation Board User Guide
UG-382
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for FSK AD5700/AD5700-1 HART Modem
FEATURES
GENERAL DESCRIPTION
Convenient connections for power through screw
Terminal block
Use of on-chip RC oscillator or an external crystal
Various link options
This user guide describes the evaluation board for the AD5700/
AD5700-1 Highway Addressable Remote Transducer (HART®)
modem. This board can be used to evaluate either the AD5700
or the AD5700-1 part. Both can operate from a single 1.71 V to
5.5 V supply, with the AD5700-1 having the added feature of
an integrated oscillator.
EQUIPMENT NEEDED
Host controller with UART interface
Complete specifications for both products can be found in the
AD5700/AD5700-1 data sheet available from Analog Devices,
Inc., which should be consulted in conjunction with this user
guide when using the evaluation board.
10565-001
EVALUATION BOARD
Figure 1.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 8
UG-382
Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
Power Supplies ...............................................................................3
Equipment Needed ........................................................................... 1
Link Options ..................................................................................3
General Description ......................................................................... 1
Evaluation Board Schematics and Artwork ...................................4
Evaluation Board .............................................................................. 1
Ordering Information .......................................................................7
Revision History ............................................................................... 2
Bill of Materials ..............................................................................7
Evaluation Board Hardware ............................................................ 3
REVISION HISTORY
5/13—Rev. 0 to Rev. A
Changed Supply Min from 2 V to 1.71 V ...................................... 1
2/12—Revision 0: Initial Version
Rev. A | Page 2 of 8
Evaluation Board User Guide
UG-382
EVALUATION BOARD HARDWARE
Table 1. Default Link Options
POWER SUPPLIES
AGND and DGND are connected together on the board to
provide a single GND signal. To power the EVAL-AD5700-1EBZ,
supply 3.3 V between the VCC and GND inputs for the analog
supply of the AD5700/AD5700-1. With L5 inserted (default), this
also provides power to IOVCC.
LINK OPTIONS
A number of links on the evaluation board must be set for the
required operating setup before using the board. The functions
of these link options are described in detail in Table 2. The
default setup is using the on-chip reference, the crystal
oscillator, and the internal receive filter (see Table 1).
Link No.
CLK_CFG1
CLK_CFG0
XTAL_EN
FILTER_SEL
L1
L2
REF_EN
DUPLEX
L5
L6
L8
Option
A
A
A
B
A
A
B
A
Inserted
Not inserted
Inserted
Table 2. Link Functions
Link No.
CLK_CFG1,
CLK_CFG0,
XTAL_EN
FILTER_SEL, L1, L2
REF_EN
DUPLEX
L5
L6
L8
Function
The AD5700/AD5700-1 support numerous clocking configurations to allow a simple, low cost solution. The
AD5700/AD5700-1 can use an external crystal or ceramic resonator, a CMOS input, or an internal RC oscillator
(AD5700-1 only). The CLK_CFG0, CLK_CFG1, and XTAL_EN links configure the clock generation as follows:
XTAL_EN
CLK_CFG1
CLK_CFG0 CLKOUT
Description
B
A
A
No output
3.6864 MHz CMOS clock connected at XTAL1 pin
B
A
B
No output
1.2288 MHz CMOS clock connected at XTAL1 pin
B
B
A
No output
Internal oscillator enabled
B
B
B
1.2288 MHz output
Internal oscillator enabled, CLKOUT enabled
A
A
A
No output
Crystal oscillator enabled
A
A
B
3.6864 MHz output
Crystal oscillator enabled, CLKOUT enabled
A
B
A
1.8432 MHz output
Crystal oscillator enabled, CLKOUT enabled
A
B
B
1.2288 MHz output
Crystal oscillator enabled, CLKOUT enabled
These link options set whether the internal or external receive band-pass filter is used at the HART input.
Setting FILTER_SEL to Position B and L1 and L2 to Position A sets the board to use the internal receive band-pass filter.
Setting FILTER_SEL to Position A and L1 and L2 to Position B sets the board to use the external receive band-pass filter.
This sets whether the internal or an external reference is used.
Position A—disables the internal reference, and a buffered external 2.5 V reference source must be applied at REF.
Position B—enables the internal 1.5 V reference and buffer.
Allows the modulator and demodulator of the AD5700/AD5700-1 to be enabled at the same time.
Position A—the AD5700/AD5700-1 operate in half-duplex operation (controlled by RTS).
Position B—the AD5700/AD5700-1 operate in full duplex operation, with the modulator and demodulator of the
AD5700/AD5700-1 enabled at the same time.
Allows VCC to be connected directly to IOVCC.
Inserted—VCC is connected to IOVCC.
Not inserted—VCC is disconnected from IOVCC.
Do not insert this link.
This link must be inserted.
Rev. A | Page 3 of 8
UG-382
Evaluation Board User Guide
EVALUATION BOARD SCHEMATIC AND ARTWORK
10565-002
Figure 2. Schematic of Controller Circuitry
Rev. A | Page 4 of 8
UG-382
10565-003
Evaluation Board User Guide
10565-004
Figure 3. Component Placement Drawing
Figure 4. Component Side PCB Drawing
Rev. A | Page 5 of 8
Evaluation Board User Guide
10565-005
UG-382
Figure 5. Solder Side PCB Drawing
Rev. A | Page 6 of 8
Evaluation Board User Guide
UG-382
ORDERING INFORMATION
BILL OF MATERIALS
Table 3.
Quantity
1
2
2
2
1
1
1
1
1
1
1
10
1
3
Reference Designator
U2
C1, C2
C3, C4
C5, C10
C6
C7
C8
C12
C14
C17
C19
CLK_CFG0, CLK_CFG1, DUPLEX,
FILTER_SEL, REF_EN, XTAL_EN,
J2, J3, L1, L2
J1
L5, L6, L8
1
2
1
1
13
1
R1
R2, R3
R4
R6
TP1 to TP13
Y1
Description
HART modem
36 pF, C0G capacitor (0603)
1 µF, X7R capacitor (0603)
100 nF, X7R capacitor (0603)
300 pF, C0G capacitor (0603)
150 pF, C0G capacitor (0603)
680 pF, C0G capacitor (0603)
22 nF, X7R capacitor (0603)
2.2 µF, X7R capacitor (0603)
2.2 nF, C0G capacitor (0603)
10 µF, tantalum capacitor (Case A)
Headers
Part Number
AD5700-1BCPZ
C0603C360J5GACTU
C0603C105K4RACTU
MCCA000159
GRM1885C1H301JA01D
06031A151JAT2A
MCCA000221
06035C223KAT2A
GRM188R71A225KE15D
C0603C222J5GACTU
TCJA106M010R0300
M20-9990345
Supplier/Number
Analog Devices
FEC 1865478
FEC 1828826
FEC 1759016
Digi-Key 490-1438-1-ND
FEC 1740606
FEC 1759084
FEC 1658869
FEC 1797012
FEC 1535565
FEC 1135234
FEC 1022248
2-pin terminal block
2-pin (0.1" pitch) header and
shorting shunt
1 MΩ (0603)
1.2 MΩ (0603)
150 kΩ (0603)
0 Ω (0603)
Test point
Quartz crystal SMD
CTB5000/2
M20-9990246
FEC 151789
FEC 1022247
MC 0.063W 0603 5% 1M
RC0603FR-071M2L
MC 0.063W 0603 1% 150K
CRCW06030000Z0EA
20-313137
ABLS-3.6864MHZ-L4Q-T
FEC 9331727
FEC 9238859
FEC 9330623
FEC 1469739
FEC 8731144
Digi-Key 535-9893-1-ND
Rev. A | Page 7 of 8
UG-382
Evaluation Board User Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2012–2013 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG10565-0-5/13(A)
Rev. A | Page 8 of 8
Similar pages