EL1506 ® Data Sheet April 18, 2005 Medium Power Differential Line Driver Features The EL1506 is a very low power dual operational amplifier designed for central office and customer premise line driving for DMT ADSL solutions. This device features a high drive capability of 400mA while consuming only 3.5mA of supply current per amplifier from ±12V supplies. This driver achieves a typical distortion of less than -75dBc, at 1MHz into a 50Ω load. The EL1506 is available in the 28-pin HTSSOP and the 24-pin thermally-enhanced SO packages. Both parts are specified for operation over the full -40°C to +85°C temperature range. • Drives 360mA at 16VP-P on ±12V supplies The EL1506 has an ENABLE pin which can be used to enable and disable the outputs. • ADSL G.DMT and G.lite CO line driving In most applications, the EL1506 is an upgrade and pincompatible drop-in replacement for the AD8016. • ADSL CPE line driving FN7114.1 • 40VP-P differential output drive into 100Ω • -75dBc typical driver output distortion driving 50Ω at 1MHz • Low quiescent current of 3.5mA per amplifier • Power-down disable mode • Pb-Free available (RoHS compliant) Applications • G.SHDSL, HDSL2 line driver • Video distribution amplifier Ordering Information • Video twisted-pair line driver PACKAGE TAPE & REEL PKG. DWG. # EL1506CM 24-Pin SO - MDP0027 EL1506CRE 28-Pin HTSSOP - MDP0048 EL1506CRE-T7 28-Pin HTSSOP 7” MDP0048 EL1506CRE-T13 28-Pin HTSSOP 13” MDP0048 EL1506CREZ (See Note) 28-Pin HTSSOP (Pb-free) - MDP0048 EL1506CREZ-T7 (See Note) 28-Pin HTSSOP (Pb-free) 7” MDP0048 EL1506CREZ-T13 (See Note) 28-Pin HTSSOP (Pb-free) 13” MDP0048 PART NUMBER • Functional and pin-compatible with AD8016 NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Get Full Datasheet 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2002, 2003, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL1506 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2