SURFACE MOUNT DISPLAY Part Number: ACPSA04-41SRWA Features SUPER BRIGHT RED Description 0.4 INCH CHARACTER HEIGHT. The Super Bright Red source color devices are made with LOW CURRENT OPERATION. Gallium Aluminum Arsenide Red Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG4990 REV NO: V.1 DATE: MAY/30/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000053 Selection Guide Part No. Dice ACPSA04-41SRWA Lens Type SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED Iv (ucd) [1] @ 10mA Description Min. Typ. 4700 16200 Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4990 REV NO: V.1 DATE: MAY/30/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000053 Super Bright Red ACPSA04-41SRWA SPEC NO: DSAG4990 REV NO: V.1 DATE: MAY/30/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000053 ACPSA04-41SRWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4990 REV NO: V.1 DATE: MAY/30/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000053 PACKING & LABEL SPECIFICATIONS ACPSA04-41SRWA SPEC NO: DSAG4990 REV NO: V.1 DATE: MAY/30/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG ERP: 1361000053