ADPOW APT60DQ100BG Ultrafast soft recovery rectifier diode Datasheet

1000V 60A
APT60DQ100B
APT60DQ100S
APT60DQ100BG* APT60DQ100SG*
®
*G Denotes RoHS Compliant, Pb Free Terminal Finish.
ULTRAFAST SOFT RECOVERY RECTIFIER DIODE
(B)
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Anti-Parallel Diode
-Switchmode Power Supply
-Inverters
• Free Wheeling Diode
-Motor Controllers
-Converters
-Inverters
• Snubber Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• PFC
• Avalanche Energy Rated
-2 4
7
D3PAK
1
2
• Cooler Operation
• Popular TO-247 Package or
Surface Mount D3PAK Package
• Higher Reliability Systems
• Low Forward Voltage
• Low Leakage Current
TO
2
1
(S)
2
1
• Increased System Power
Density
1 - Cathode
2 - Anode
Back of Case - Cathode
MAXIMUM RATINGS
Symbol
VR
All Ratings: TC = 25°C unless otherwise specified.
Characteristic / Test Conditions
APT60DQ100B_S(G)
UNIT
1000
Volts
Maximum D.C. Reverse Voltage
VRRM
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 96°C, Duty Cycle = 0.5)
60
RMS Forward Current (Square wave, 50% duty)
81
IF(RMS)
IFSM
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
EAVL
Avalanche Energy (1A, 40mH)
TJ,TSTG
TL
Amps
540
20
mJ
-55 to 175
Operating and StorageTemperature Range
°C
300
Lead Temperature for 10 Sec.
STATIC ELECTRICAL CHARACTERISTICS
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
MIN
TYP
MAX
IF = 60A
2.5
3.0
IF = 120A
3.06
IF = 60A, TJ = 125°C
1.95
Volts
VR = 1000V
100
VR = 1000V, TJ = 125°C
500
APT Website - http://www.advancedpower.com
40
UNIT
µA
pF
11-2005
VF
Characteristic / Test Conditions
053-4234 Rev A
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT60DQ100B_S(G)
Characteristic
Test Conditions
trr
Reverse Recovery Time
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IF = 60A, diF/dt = -200A/µs
VR = 667V, TC = 125°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
VR = 667V, TC = 25°C
Maximum Reverse Recovery Current
trr
IRRM
IF = 60A, diF/dt = -200A/µs
IF = 60A, diF/dt = -1000A/µs
VR = 667V, TC = 125°C
Maximum Reverse Recovery Current
MIN
TYP
MAX
UNIT
-
29
-
255
-
560
-
5
-
325
ns
-
2325
nC
-
12
-
160
ns
-
3790
nC
-
38
Amps
MIN
TYP
ns
nC
-
-
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
RθJC
WT
Torque
Characteristic / Test Conditions
MAX
UNIT
.46
°C/W
Junction-to-Case Thermal Resistance
Package Weight
0.22
oz
5.9
g
Maximum Mounting Torque
10
lb•in
1.1
N•m
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.45
D = 0.9
0.40
0.35
0.7
0.30
0.25
0.5
Note:
0.20
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
0.50
0.3
0.15
t2
0.10
0
t
Duty Factor D = 1/t2
Peak TJ = PDM x ZθJC + TC
SINGLE PULSE
0.1
0.05
0.05
10-5
10-4
10-3
10-2
10-1
1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL
11-2005
Junction
temp. (°C)
053-4234 Rev A
t1
0.328
0.00419
0.133
0.364
Power
(watts)
Case temperature. (°C)
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
TYPICAL PERFORMANCE CURVES
200
150
TJ = 175°C
100
TJ = 125°C
TJ = 25°C
50
1.0
2.0
3.0
4.0
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
Qrr, REVERSE RECOVERY CHARGE
(nC)
6000
T = 125°C
J
V = 667V
R
5000
120A
4000
60A
3000
2000
30A
1000
0
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
30A
200
150
100
40
35
T = 125°C
J
V = 667V
120A
R
30
25
60A
20
15
30A
10
5
0
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
100
Qrr
Duty cycle = 0.5
T = 175°C
90
trr
1.0
60A
250
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
J
80
trr
0.8
70
IF(AV) (A)
Kf, DYNAMIC PARAMETERS
(Normalized to 1000A/µs)
1.2
300
R
0
IRRM, REVERSE RECOVERY CURRENT
(A)
0
T = 125°C
J
V = 667V
120A
350
50
TJ = -55°C
0
APT60DQ100B_S(G)
400
trr, REVERSE RECOVERY TIME
(ns)
IF, FORWARD CURRENT
(A)
250
IRRM
0.6
60
50
40
0.4
Qrr
30
20
0.2
10
0.0
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
25
50
75
100
125
150
175
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
250
200
11-2005
150
100
50
0
1
10
100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
053-4234 Rev A
CJ, JUNCTION CAPACITANCE
(pF)
300
APT60DQ100B_S(G)
Vr
diF /dt Adjust
+18V
APT10035LLL
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
5
1
4
Zero
5
0.25 IRRM
3
2
Qrr - Area Under the Curve Defined by IRRM and trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
3
D PAK Package Outline
TO-247 Package Outline
15.49 (.610)
16.26 (.640)
6.15 (.242) BSC
5.38 (.212)
6.20 (.244)
4.90 (.193)
5.10 (.201)
1.45 (.057)
1.60 (.063)
20.80 (.819)
21.46 (.845)
Cathode
11-2005
053-4234 Rev A
e3 100% Sn
Cathode
(Heat Sink)
e1 SAC: Tin, Silver, Copper
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
0.40 (.016)
0.65 (.026)
4.50 (.177) Max.
19.81 (.780)
20.32 (.800)
1.65 (.065)
2.13 (.084)
1.01 (.040)
1.40 (.055)
1.00 (.039)
1.15(.045)
12.40 (.488)
12.70 (.500)
0.020 (.001)
0.250 (.010)
2.70 (.106)
2.90 (.114)
1.15 (.045)
1.45 (.057)
1.20 (.047)
1.90 (.075) 1.40 (.055)
2.10 (.083)
5.45 (.215) BSC
(2 Plcs.)
Anode
2.21 (.087)
2.59 (.102)
13.30 (.524)
13.60(.535)
18.70 (.736)
19.10 (.752)
3.50 (.138)
3.81 (.150)
0.40 (.016)
0.79 (.031)
15.85 (.624)
16.05(.632)
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
2.40 (.094)
2.70 (.106)
(Base of Lead)
Heat Sink (Cathode)
and Leads
are Plated
Anode
Cathode
Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
Similar pages