Surface Mount Aluminum Electrolytic Capacitors NATK Series FEATURES • • • • EXTENDED TEMPERATURE +125OC & LONG LIFE (T0 5,000 HOURS) AVAILABLE WITH ANTI-VIBRATION WIDE TERMINATIONS CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW ..SOLDERING • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS 16 ~ 35VDC Rated Voltage Range Rated Capacitance Range 47 ~ 3900μF -40 ~ +125°C Operating Temp. Range ±20% (M) Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 0.01CV or 3μA whichever is greater W.V. (Vdc) Tan δ @ 120Hz/20°C S.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Low Temperature Stability Z -25°C/Z +20°C Impedance Ratio @ 120Hz Z -40°C/Z +20°C Load Life Test at W.V. @ 125°C Capacitance Change 8 ~ 10mm Diameter: 2,000 Hours Tan δ 12.5mm Diameter: 3,000 Hours Leakage Current 16mm Diameter: 5,000 Hours 16 20 25 35 32 44 See specifications table (page 2) 16 25 35 2 2 2 4 3 3 Within ±30% of initial measured value Less than 300% of specified max. value Less than specified max. value STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap.(μF) Code 47 100 160 220 270 300 330 390 470 620 680 910 1000 1500 2200 3300 3900 470 101 161 221 271 301 331 391 471 621 681 911 102 152 222 332 392 Working Voltage (Vdc) 16 25 35 6.3X8 6.3X8 6.3X8 8X10.8 8X10.8 8X10.8 10X10.8 8X10.8 10X10.8 8X10.8 10X10.8 12.5X14 8X10.8 10X10.8 12.5X14 10X10.8 12.5X14 16X17 12.5X14 12.5X14 16X17 16X17 12.5X14 16X17 18X17.5 16X17 18X17.5 18X22 18X17.5 18X22 18X22 - + Dφ I I - W A L 0.3mm max. P B DIMENSIONS (mm) Case Size 6.3 x 8 8 x 10.8 10 x 10.8 12.5 x 14 16 x 17 18X17.5 Dφ ±0.5 6.3 8.0 10.0 12.5 16.0 18.0 L max.* 8.0 10.8 10.8 14.0 17.0 17.5 A, B ±0.2 6.6 8.3 10.3 12.8 16.3 19.0 I ±0.3 2.5 2.9 3.2 4.5 5.2 6.5 P ±0.3 2.2 3.2 4.6 4.6 7.0 7.0 W 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 1.0 ~ 1.4 1.8 ~ 2.1 1.7 ~ 2.1 18X22 18.0 *21.5 +0.5/-1.0 19.0 6.5 7.0 1.7 ~ 2.1 Reflow Code J = +240°C K = +245°C L = +250°C N = +260°C Termination / Packaging Code B = Sn-Bi / 13" reel S = Sn / 13" reel LB = Sn-Bi / 15" reel LS = Sn / 15" reel Note: 16mm & 18mm diameter parts are only available with Sn finish PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NATK Series STANDARD VALUES, CASE SIZES & SPECIFICATIONS Cap. (μF) 100 Part Number NATK101M16V6.3X8NBYF Working Voltage Dissipaton Factpr @120Hz/20°C 0.20 Max. ESR (Ω) Max. Ripple Current (mA rms) AT 100KHz/20°C AT 100KHz/125°C 0.45 200 Load Life Hours @ +125°C 2,000 NATK331M16V8X10.8NBYF 330 0.20 0.18 300 2,000 NATK391M16V8X10.8NBYF 390 0.20 0.18 300 2,000 NATK471M16V10X10.8LBYF 470 0.20 0.11 500 2,000 NATK681M16V10X10.8LBYF 680 0.20 0.11 500 2,000 0.20 0.08 1200 3,000 0.20 0.08 1200 3,000 NATK102M16V12.5X14KLBYF 1000 16 NATK152M16V12.5X14KLBYF 1500 NATK222M16V16X17JLSYF 2200 0.20 0.05 1800 5,000 NATK332M16V18X17.5JLSYF 3300 0.24 0.045 2000 5,000 NATK392M16V18X22JLSYF 3900 0.24 0.040 2200 5,000 NATK101M25V6.3X8NBYF 100 0.16 0.45 200 2,000 NATK221M25V8X10.8NBYF 220 0.16 0.18 300 2,000 NATK271M25V8X10.8NBYF 270 0.16 0.18 300 2,000 NATK331M25V10X10.8LBYF 330 0.16 0.11 500 2,000 NATK471M25V10X10.8LBYF 470 0.16 0.11 500 2,000 NATK681M25V12.5X14KLBYF 680 0.16 0.08 1200 3,000 NATK911M25V12.5X14KLBYF 910 0.16 0.08 1200 3,000 25 NATK102M25V16X17JLSYF 1000 0.16 0.05 1800 5,000 NATK152M25V16X17JLSYF 1500 0.16 0.05 1800 5,000 NATK222M25V18X17.5JLSYF 2200 0.18 0.045 2000 5,000 NATK332M25V18X22JLSYF 3300 0.20 0.040 2200 5,000 NATK470M35V6.3X8NBYF 47 0.14 0.45 200 2,000 NATK101M35V8X10.8NBYF 100 0.14 0.18 300 2,000 NATK161M35V8X10.8NBYF 160 0.14 0.18 300 2,000 NATK221M35V10X10.8LBYF 220 0.14 0.11 500 2,000 NATK301M35V10X10.8LBYF 300 0.14 0.11 500 2,000 NATK331M35V12.5X14KLBYF 330 0.14 0.08 1200 3,000 NATK471M35V12.5X14KLBYF 470 0.14 0.08 1200 3,000 35 NATK621M35V12.5X14KLBYF 620 0.14 0.08 1200 3,000 NATK681M35V16X17JLSYF 680 0.14 0.05 1800 5,000 NATK102M35V16X17JLSYF 1000 0.14 0.05 1800 5,000 NATK152M35V18X17.5JLSYF 1500 0.14 0.045 2000 5,000 NATK222M35V18X22JLSYF 2200 0.16 0.040 2200 5,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency (Hz) 47μF ~ 3900μF 100 < f <1K 0.60 1K < f <10K 0.85 10K < f <100K 0.93 100K < f 1.00 PART NUMBER SYSTEM NATK 161 M 35V 8x6.3 N S W Y F Series RoHS Compliant Wide Terminations (Opt.) Termination/Packaging Code: S = 100% Sn/13" Reel, LS = 100% Sn/15" Reel B = Sn-Bi/13" Reel, LB = Sn-Bi/15" Reel Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NATK Series STANDARD TERMINATIONS - LAND PATTERN DIMENSIONS (mm) Case Size 6.3x8 8x10.8 10x10.8 12.5x14 16x17 18x17, 22 a 1.8 2.8 4.3 4.3 6.6 6.6 b 3.6 4.1 4.4 5.8 6.5 7.7 a c 1.8 2.1 2.5 2.5 5.0 5.0 c b WIDE TERMINATION (WT) DIM. (mm) WT LAND PATTERN DIM. (mm) Case Size Dφ ±0.5 L max. A, B C ±0.2 P ±0.2 8 x 10.8WT 8.0 10.5 8.3 ± 0.2 9.0 3.2 10 x 10.8WT 10.0 10.8 10.3 ± 0.2 11.0 4.6 12.5 x 14WT 12.5 14.0 13.5 ± 0.2 14.2 4.6 16 x 17WT 16.0 17.0 17.0 ± 0.2 18.0 7.0 W 0.7 ~ 1.0 1.0 ~ 1.4 1.0 ~ 1.4 1.8 ~ 2.1 C R (0.7) (0.7) (2.2) (3.0) Case Size 8x10.8 10x10.8 12.5x14 16x17 T (1.3) (1.3) (2.4) (2.0) a 2.5 3.8 3.8 5.0 Dφ W A b 4.5 4.8 6.1 8.0 c 4.7 4.7 6.9 9.5 a WT Anti-Vibration Skirt L c T R R b P Termination deflection: WT = 0.15mm max. from bottom of support terminals B PEAK REFLOW TEMPERATURES AND DURATION 6.3mm & 8mm φ 10mm φ 12.5mm φ 16mm & 18mm φ Time above 200°C 80 sec. max. 70 sec. max. 60 sec. max. 50 sec. max. Time above 217°C 70 sec. max. 60 sec. max. 50 sec. max. 40 sec. max. Time above 230°C 40 sec. max. 40 sec. max. 30 sec. max. 20 sec. max. Capacitors can withstand two reflow passes under the specified conditions. Capacitors must be allowed to cool to room temperature before the second reflow pass. Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL Peak Temperature 5 seconds 260°C 250°C 245°C 240°C Temperature - Deg. C Diameter Peak Temperature (see table) 230 Time Above 230°C (see table) 200 Time Above 217°C (see table) 150 100 Preheat - 120 seconds max. (150°C ~ 180°C) Time Above 200°C (see table) 50 Time (Seconds) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Surface Mount Aluminum Electrolytic Capacitors WT Anti-Vibration Test Direction: X, Y, Z axis Frequency & Duration: 5 to 2000Hz for 20 minutes Peak to Peak Amplitude: 5mm Peak Acceleration: 30G Sweep Type: Log Within ± 10% of initial value < Specified value < Specified value Test Mehod Δ Capacitance Tangent of Loss Leakage Current TR13 330mm (13") REEL TR15 380mm (15") REEL CARRIER TAPE Case Size 6.3x8 8x10.8 10x10.8 12.5x14 16x17 18x17 18x22 A ±0.2 7.0 8.7 10.7 13.2 17.5 19.5 19.5 B ±0.2 7.0 8.7 10.7 13.2 17.5 19.5 19.5 NATK Series C ±0.3 16.0 24.0 24.0 32.0 44.0 44.0 44.0 D ±0.1 7.5 11.5 11.5 14.2 20.2 20.2 20.2 P ±0.1 12.0 16.0 16.0 24.0 28.0 32.0 32.0 T ±0.2 8.2 11.1 11.2 14.3 17.3 17.8 22.5 t max. 0.6 0.6 0.6 0.6 0.6 0.6 0.6 s ±0.1 28.4 40.4 40.4 40.4 W ±1.0 18 26 26 34 46 46 46 Case Size 6.3x8 8x10.8 10x10.8 12.5x14 16x17 18x17 18x22 Qty per Reel 13" (330mm) 15" (380mm) 500 900 300 500 300 500 250 200 175 125 TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 10 empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. CARRIER 1.5∅ +0.1/1.5φ+0.1/-0 1.75 + 0.15 1.75 ± t B C S D 4 + 0.1 A P Feeding T REEL 2mm ± 0.5mm φ50mm min. φ13mm ± 0.5mm φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W 3mm www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com