UPS Agies 120K FEATURES Online double conversion technology with DSP control Advanced control with Adaptive Feed Forward C ancellation (AFC ) technology for very low harmonic distortion Very low input current distortion (THDi < 1%) Input power factor 0.99 at 10% load Output efficiency up to 95% Space-saving compact design Over 60% mateirals recyclable Front access makes maintenance and replacement easily Highly flexibility in single phase/three-phase set-ups Parallel redundant operation with up to 4 units Variety of communications and options available Remaining backup time calculation PHASE (ONLY FOR ONLINE UPS) Phase: 3-phase in / 3-phase out PROTECTION Full Protection: 120000 VA / 96000 W 3 x 400V (3Ph + N) +15% or –20% 50/60 Hz ± 5 % OUTPUT AC Voltage Regulation (Batt. Mode) : Stationary: ±1% Transitory: ±2% (load variations 100-0100%) Frequency Range (Batt. Mode): ±10 Hz/s Waveform (Batt. Mode): Pure Slin Wave Output Receptacles: India, French, Schuko, NEMA, and IEC selections 805mm(L) x 590mm(W) x 1320mm(H) NONE Dimension: Net Weight (kgs): OPERATING ENVIRONMENT Humidity: Noise Level: NONE NONE MANAGEMENT Optional USB/RS-232 Port: BATTERY Battery Type: Battery Number: Typical Recharge Time: Overload,Discharge,Overcharge,Protection PHYSICAL INPUT Capacity: Voltage: Voltage Range: Frequency Range: SAFETY STANDARD APPAOVAL NONE NONE NONE This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice Support Windows 98/2000/2003/XP/Vista/2008, Windows 7, Linux, and MAC 8