ILLUMINATION For NEW designs consider this replacement product: N O O R L D O ER N G A E B R LE • LUXEON 3014 LUXEON 4014 A compact footprint delivering high efficacy and just the right amount of light LUXEON 4014 is a 2.9V low-power product, the first of its kind from Lumileds. It is a compact QFN 4.0mm x 1.4mm x 0.7mm package that delivers the Quality of Light needed for indoor lighting applications. LUXEON 4014 offers an ideal solution when uniformity and a smooth lighting appearance are critical in luminaire designs. FEATURES AND BENEFITS PRIMARY APPLICATIONS Rectangular QFN package design increases uniformity Indoor Area Lighting Superior heat dissipation enables cost effective design Unique phosphor technology enables high efficacy 1/6th ANSI color binning for tight color control Superior heat dissipation enables cost effective thermal design RoHS COMPLIANT DS205 LUXEON 4014 Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved. Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 N O O R L D O ER N G A E B R LE Product Performance and Characterization Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Material Information & Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Typical Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. i General Information Product Nomenclature LUXEON 4014 is tested and binned at Tj = 25°C and 30mA DC. The part number designation is explained as follows: N O O R L D O ER N G A E B R LE MXZA–BCDD–00EE Where: A — designates minimum CRI (value 8 for 80, 9 for 90) B — designates radiation pattern (value P for Lambertian) C — designates color (W for White) DD — designates nominal CCT (27 for 2700K, 30 for 3000K, 35 for 3500K, 40 for 4000K and 50 for 5000K) EEEE — designates additional part numbers Therefore 4000K, 80CRI LUXEON 4014 product will be: MXZ8–PW40–0000 Average Lumen Maintenance Characteristics The LUXEON 4014 is being tested in accordance with LM-80 standards. Please contact your Lumileds TSM or sales person for more detailed information. Environmental Compliance Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 4014 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted material to the LUXEON 4014: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 2 Product Performance and Characterization Guide Typical Product Characteristics at 30mA and 60mA Table 1. Performance Characteristics at Tj = 25˚C, If Minimum CRI Part Number Luminous Flux @ 30mA, 25°C Luminous Flux @ 60mA, 25°C Vf at 30mA Minimum (lm) Typical (lm) Minimum (lm) Typical (lm) Typical N O O R L D O ER N G A E B R LE Nominal CCT 5000K MXZ7-PW50 70 10.0 13.0 18 23 2.9 5700K MXZ7-PW57 70 10.0 13.0 18 23 2.9 6500K MXZ7-PW65 70 10.0 13.0 18 23 2.9 2200K MXZ8-PW22 80 8.5 9.7 14 17 2.9 2500K MXZ8-PW25 80 8.5 10.2 14 17 2.9 2700K MXZ8-PW27 80 8.5 10.5 15 18 2.9 3000K MXZ8-PW30 80 8.5 11.0 15 20 2.9 3500K MXZ8-PW35 80 9.0 11.0 16 20 2.9 4000K MXZ8-PW40 80 10.0 12.0 18 22 2.9 5000K MXZ8-PW50 80 10.0 12.0 18 22 2.9 5700K MXZ8-PW57 80 9.5 11.5 17 20 2.9 6500K MXZ8-PW65 80 9.5 11.5 17 20 2.9 2700K MXZ9-PW27 90 8.5 9.0 14 17 2.9 3000K MXZ9-PW30 90 8.5 9.3 14 17 2.9 4000K MXZ9-PW40 90 typ. 10.0 11.1 17 20 2.9 5000K MXZ9-PW50 90 typ. 10.0 11.1 17 20 2.9 Notes for Table 1: 1. Lumileds maintains a tolerance of ±7.5% on luminous flux, ±2 on CRI. 2. Production parts are binned at 30mA, 25°C. 3. Performance at 60mA, 25°C is for reference only. Electrical Characteristics Electrical Characteristics of Low-Power LEDs Solder Pad Temperature = 25°C, Test Current = 30mA Table 2. Forward Voltage Vf [1] (V) Part Numbers MXZx-PWXX Minimum Typical Maximum Typ. Temperature Coefficient of Forward Voltage [2] (mV/°C) DVf / DTJ 2.7 2.9 3.2 -1.6 Typical Thermal Resistance Junction to Solder Pad (°C/W) Ru J-C 45 Notes for Table 2: 1. Lumileds maintains a tolerance of ± 0.10V on forward voltage measurements. 2. Measured between Tj = 25°C and Tj = 110°C. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 3 Absolute Maximum Ratings Table 3. Operating Condition and Ratings Parameter Maximum Performance DC Forward Current 90mA [1] Peak Pulsed Forward Current [2] 100mA Soldering Temperature 260°C 3 ESD Sensitivity [ 2000V Human Body Model (HBM) Class 2 JEDEC JS-001-2012 400V Machine Model (MM) Class C JESD22-A115C Storage Temperature -40°C - 85°C N O O R L D O ER N G A E B R LE Allowable Reflow Cycles LED Junction Temperature 125°C Operating Case Temperature 85°C Reverse Voltage (Vr) [3] [4] -5V Notes for Table 3: 1. Ripple current with a frequency of 50-150 Hz is allowed, as long as the average of the current waveform is below 80mA, and the maximum of the current waveform is lower than 100mA. 2. At 10% duty cycle and pulse width 10mS. 3. LUXEON low-power LEDs are not designed to be driven in reverse bias. 4. At maximum reverse current of 10 μA. JEDEC Moisture Sensitivity Table 4. 2 Soak Requirements Floor Life Level Standard Time Conditions Time Conditions 1 year [ 30°C / 60% RH 168 Hrs. + 5 / -0 Hrs. [ 85°C / 60% RH DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 4 Reflow Soldering Characteristics 300 Tp: 260°C 260°C +0/-5°C 250 Ramp-Up Rate, 3°C/sec. max. 255°C +5/-0°C TL: 217°C Tsmax : 200°C N O O R L D O ER N G A E B R LE Temperature ( C) 200 tp: 10-30sec. 30sec max. Tsmin: 150°C 150 ts : 60-120sec. tL: 60-150 sec,max 100 50 0 0 50 100 150 200 250 300 Time (seconds) Temperature Profile for Table 5. Table 5. Reflow Profile in Accordance with J-Std-020D. Profile Feature Lead Free Assembly Preheat/Soak : Temperature Min (Tsmin) Temperature Max (Tsmax) Maximum Time (ts) from Tsmin to Tsmax 150°C 200°C 120 seconds Ramp-up Rate (TL to Tp ) 3°C / second Liquidous Temperature (TL ) 217°C Maximum Time (tL ) Maintained above TL 150 seconds Maximum Peak Package Body Temperature (Tp ) 260°C Time (tp ) within 5°C of the specified temperature (Tc ) 10-30 seconds Maximum Ramp-Down Rate (Tp to TL ) 6°C / second Maximum Time 25°C to Peak Temperature 8 minutes Note for Table 5: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 5 Material Information & Mechanical Dimensions MXZx-PWxx Table 6. Material Information Specification Lead Frame Base: Copper Alloy Reflector Plating: Ni/Ag Electrode Plating: Ni/Ag Package Body: High Temperature Thermal Plastic Encapsulant: Silicone Resin, with Phosphor LED Chip: InGaN N O O R L D O ER N G A E B R LE Material/Component +/- 0.05 Anode Cathode Cathode Marker Figure 1. Package outline dimensions. Notes for Figure 1: 1. All dimensions are in millimeters. 2. General tolerance +/- 0.10. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 6 Characteristic Curves N O O R L D O ER N G A E B R LE Relative Spectral Distribution vs. Wavelength Junction Temperature at 25°C; Test Current = 30mA Figure 2. Emission color spectrum for MXZ7-PWxx Relative Spectral Distribution vs. Wavelength Junction Temperature at 25°C; Test Current = 30mA Figure 3. Emission color spectrum for MXZ8-PWxx. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 7 Characteristic Curves, Continued N O O R L D O ER N G A E B R LE Relative Spectral Distribution vs. Wavelength Junction Temperature at 25°C; Test Current = 30mA Figure 4. Emission color spectrum for MXZ9-PWxx. Relative Light Output Characteristics over Temperature Test Current = 30mA Figure 5. Relative light output vs. junction temperature for MXZx-PWxx. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 8 Typical Forward Current N O O R L D O ER N G A E B R LE Junction Temperature at 25°C Figure 6. Forward current vs. forward voltage for MXZx-PWxx. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 9 Light Output Characteristics N O O R L D O ER N G A E B R LE Relative Light Output Characteristics over Forward Current Junction Temperature at 25°C Figure 7. Light output vs. forward current for MXZx-PWxx. Typical Relative Efficiency vs. Forward Current Junction Temperature at 25°C Figure 8. Typical relative efficiency vs. forward current for MXZx-PWxx. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 10 Typical Radiation Patterns N O O R L D O ER N G A E B R LE Junction Temperature at 25°C Figure 9. Radiation pattern for MXZx-PWxx. Polar Radiation Pattern, Junction Temperature at 25°C Figure 10. Radiation pattern in polar for MXZx-PWxx. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 11 N O O R L D O ER N G A E B R LE Emitter Pocket Tape Packaging Figure 11. Emitter pocket tape packaging. Notes for Figure 11: 1. All dimensions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. The maximum number of consecutive missing LEDs is two. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 12 Emitter Reel Packaging N O O R L D O ER N G A E B R LE 18.4 max 2.0 +0.5/-0.0 180.0 ±0.5 62.5 +0/-2.5 Ø24.0 ±0.5 PART NO: LOT NO: MXM8-PW40-5601 Ø13.0 ±0.2 090430-0136959718 QUANTITY: 1998 CAT CODE: L56X DATE CODE: 1205 12.4 +2/-0 Figure 12. Emitter reel packaging. Notes for Figure 12: 1. All dimentions are in millimeters. 2. Empty component pockets sealed with top cover tape. 3. 7 inch reel-3000 pieces per reel. 4. Minimum packing quantity is 1000 pieces. 5. The maximum number of consecutive missing LEDs is two. 6. In accordance with EIA-481-1-B specification. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 13 Product Binning and Labeling Purpose of Product Binning In the manufacturing of LED products, there is a distribution of performance around the typical values given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux, color and forward voltage (Vf). N O O R L D O ER N G A E B R LE Decoding Product Bin Labeling LUXEON 4014 emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 6500K emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A= Flux bin (L etc.) B and C = D= Color bin (For example 93, A1, 5L or 5M) Vf bin Luminous Flux and Forward Voltage Bins Tables 7 and 8 list the standard photometric luminous flux bins for LUXEON 4014 emitters (tested and binned at 30mA). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7. Flux Bins Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) 10.0 A 8.5 B 10.0 11.5 C 11.5 13.0 D 13.0 15.0 E 15.0 18.0 Bin Code Minimum Forward Voltage (V) Maximum Forward Voltage (V) S 2.7 2.8 Tested and binned at 25°C, If=30mA. Tester tolerance: ±7.5%. Table 8. Vf Bins T 2.8 2.9 V 2.9 3.0 W 3.0 3.1 X 3.1 3.2 Tested and binned at 25°C, If=30mA. Tester tolerance: ±0.10V. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 14 Color Bin Structure MXZ8-PW22 1/6th Color Bin Structure 0.450 N O O R L D O ER N G A E B R LE 0.440 0.430 A1 A3 A5 y 0.420 A2 0.410 A4 A6 0.400 0.390 0.380 0.475 0.485 0.495 0.505 0.515 0.525 0.535 x Figure 13. 2200K 1/6th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 9. LUXEON 4014 1/6th ANSI Color Bin Coordinates for MXZ8-PW22-0000 Emitter Bin Code x y Bin Code x y A1 0.5178 0.5262 0.5154 0.5075 0.4362 0.4381 0.4194 0.4176 A4 0.4996 0.5075 0.4972 0.4897 0.4158 0.4176 0.3990 0.3974 A2 0.5075 0.5154 0.5046 0.4972 0.4176 0.4194 0.4007 0.3990 A5 0.5010 0.5094 0.4996 0.4917 0.4323 0.4343 0.4158 0.4140 A3 0.5094 0.5178 0.5075 0.4996 0.4343 0.4362 0.4176 0.4158 A6 0.4917 0.4996 0.4897 0.4823 0.4140 0.4158 0.3974 0.3957 Notes for Figure 13 and Table 9: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 15 Color Bin Structure MXZ8-PW25 1/6th Color Bin Structure 0.455 N O O R L D O ER N G A E B R LE 0.445 0.435 2500K 0.425 y 91 93 95 0.415 0.405 92 94 96 0.395 0.385 0.375 0.450 0.460 0.470 0.480 0.490 0.500 0.510 0.520 x Figure 14. 2500K 1/6th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 10. LUXEON 4014 1/6th ANSI Color Bin Coordinates for MXZ8-PW25-0000 Emitter Bin Code x y Bin Code x y 91 0.4944 0.5010 0.4917 0.4845 0.4322 0.4323 0.4140 0.4137 94 0.4774 0.4845 0.4746 0.4670 0.4134 0.4137 0.3952 0.3948 92 0.4845 0.4917 0.4823 0.4746 0.4137 0.4140 0.3957 0.3952 95 0.4813 0.4879 0.4774 0.4703 0.4319 0.4320 0.4134 0.4132 93 0.4879 0.4944 0.4845 0.4774 0.4320 0.4322 0.4137 0.4134 96 0.4703 0.4774 0.4670 0.4593 0.4132 0.4134 0.3948 0.3944 Notes for Figure 14 and Table 10: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 16 Color Bin Structure MXZx-PW27 1/9th Color Bin Structure 82 0.450 N O O R L D O ER N G A E B R LE 0.440 0.430 8J 8K 0.420 8F 8E y 0.410 8D 8G 8H 0.400 8L 8M 2580 0.390 2870K 0.380 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x Figure 15. 2700K 1/9th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 11. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70 0.01350 0.00700 53.70 Notes for Figure 15 and Table 11: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 17 Color Bin Structure MXZx-PW30 1/9th Color Bin Structure 0.445 N O O R L D O ER N G A E B R LE 0.435 0.425 7K 0.415 7J y 7E 7F 0.405 7D 0.395 7G 7H 7L 7M 2870K 0.385 3200K 0.375 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x Figure 16. 3000K 1/9th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 12. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 3000K Single 3-step MacAdam ellipse (0.4338, 0.403) 3000K Single 5-step MacAdam ellipse (0.4338, 0.403) 0.00834 0.00408 53.22 0.01390 0.00680 53.22 Notes for Figure 16 and Table 12: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 18 Color Bin Structure MXZx-PW35 1/9th Color Bin Structure 0.430 N O O R L D O ER N G A E B R LE 0.420 0.410 6K 0.400 6F 6J y 6D 6E 0.390 6G 6L 6H 0.380 3250K 6M 0.370 3750K 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x Figure 17. 3500K 1/9th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 13. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00 0.01545 0.00690 54.00 Notes for Figure 17 and Table 13: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 19 Color Bin Structure MXZx-PW40 1/9th Color Bin Structure 52 0.420 N O O R L D O ER N G A E B R LE 0.410 0.400 5K 0.390 y 5F 5J 5E 5D 0.380 5L 5G 0.370 5H 3750K 5M 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x Figure 18. 4000K 1/9th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 14. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72 0.01565 0.00670 53.72 Notes for Figure 18 and Table 14: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 20 Color Bin Structure MXZx-PW50 1/9th Color Bin Structure 36 0.390 N O O R L D O ER N G A E B R LE 0.380 3K 0.370 3F 3J 0.360 3G 3E 3D y 0.350 3L 3H 4750K 3M 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x Figure 19. 5000K 1/9th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 15. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62 0.01370 0.00590 59.62 Notes for Figure 19 and Table 15: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 21 Color Bin Structure MXZx-PW57 1/9th Color Bin Structure 21 24 0.370 N O O R L D O ER N G A E B R LE 0.360 2K 0.350 2F 2J 2G 2E y 2D 0.340 2L 5250K 2H 0.330 2M 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 20. 5700K ANSI 1/9th color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 16. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09 Notes for Figure 20 and Table 16: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 22 Color Bin Structure MXZx-PW65 1/9th ColorBin Structure 0.365 N O O R L D O ER N G A E B R LE 0.355 0.345 1K 1F 0.335 y 1J 1G 1D 1E 1L 0.325 6000K 1H 1M 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 21. 6500K 1/9th ANSI color bin structure. LUXEON 4014 emitters are tested and binned by x,y coordinates. Table 17. Nominal ANSI CCT Color Space Center Point (cx, cy) Major Axis, a Minor Axis, b Ellipse Rotation Angle (degrees) 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57 Notes for Figure 21 and Table 17: 1. Tested and binned at 25°C, IF=30mA. Tester tolerance: ± 0.01 in x and y coordinates. DS205 LUXEON 4014 Product Datasheet 20160620 ©2016 Lumileds Holding B.V. All rights reserved. 23 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. N O O R L D O ER N G A E B R LE To learn more about our portfolio of light engines visit lumileds.com. ©2016 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS205 LUXEON 4014 Product Datasheet 20160620 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.