ASL5463 ASL5463 Data Sheet High Gain, Low Noise Amplifier 1. Product Overview 1.1 General Description ASL5463 is a low noise amplifier with high linearity over a wide range of frequency up to 1.7 ~ 4.0 GHz with S11 & S22 < -10 dB. It is also suitable for use in the mobile wireless systems such as PCS, WCDMA, LTE, WiBro, WiMAX, WLAN and so on. It has an active bias circuit for stable current over temperature and process variation. The amplifier is available in SOT363 package and passes the stringent DC, RF and reliability tests. 1.2 Features 17.0 dB Gain at 2000 MHz 20.0 dBm P1dB at 2000 MHz 37.0 dBm Output IP3 at 2000 MHz 0.75 dB NF at 2000 MHz Current adjustable with R1 (in application circuit 3.1) MTTF > 100 Years Single Supply: +3 ~ +5 V 1.3 Applications Low Noise Amplifier for PCS, WCDMA, WLAN, and WiMAX GPS, GLONASS Other Low Noise Application 1.4 Package Profile & RoHS Compliance SOT363, 2.1x2.0 mm2, surface mount 1/12 ASB Inc. [email protected] RoHS-compliant August 2017 ASL5463 2. Summary on Product Performances 2.1 Typical Performance Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 1500 1700 1800 2000 2500 MHz Noise Figure 0.65 0.65 0.70 0.75 0.95 dB Gain 19.4 18.3 17.8 17.0 14.9 dB S11 -17.0 -18.0 -17.0 -15.0 -14.0 dB S22 -10.0 -10.0 -10.0 -11.0 -11.0 dB IP31) 32.0 33.0 34.0 37.0 38.0 dBm Output P1dB 20.0 20.0 20.0 20.0 20.0 dBm Current 45 mA Device Voltage +5 V Output 1) OIP3 is measured with two tones at the output power of +4 dBm/tone separated by 1 MHz. 2.2 Product Specification Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typ Max Unit Frequency 2000 MHz Noise Figure 0.75 dB Gain 17.0 dB S11 -15.0 dB S22 -11.0 dB Output IP3 37.0 dBm Output P1dB 20.0 dBm Current 45 mA Device Voltage +5 V 2.3 2/12 Min Pin Configuration Pin Description 1 Bias 2, 4, 5 Ground 3 RF_IN 6 RF_OUT & Bias Simplified Outline 1 2 3 ASB Inc. [email protected] 6 5 4 August 2017 ASL5463 2.4 Absolute Maximum Ratings Parameters Max. Ratings Operation Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +6 V Operation Junction Temperature +150 C Input RF Power (CW, 50 matched) +25 dBm 2.5 Thermal Resistance Symbol Description Typ Unit Rth Thermal resistance from junction to lead 110 C/W 2.6 ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity Level MSL 3 at 260 C reflow (Intentionally Blanked) 3/12 ASB Inc. [email protected] August 2017 ASL5463 3. Application: 1700 ~ 2500 MHz (Vsupply = +5 V) 3.1 Application Circuit & Evaluation Board Vdevice = +5 V R1 C5 R2 C4 R3 C3 L2 C2 L1 RF IN RF OUT C1 ASL5463 PCB Information Material FR4 Thickness (mm) 0.8 Size (mm) 40x40 EB No. EB-363-J2 Bill of Material 4/12 Symbol Value Size Description Manufacturer ASL5463 - - MMIC Amplifier ASB C1, C2 100 pF 0603 DC blocking capacitor Murata C3 22 pF 0603 Decoupling capacitor Murata C4, C5 1 F 0603 Decoupling capacitor Murata L1 6.8 nH 0603 RF choke inductor Murata L2 8.2 nH 0603 RF choke inductor Murata R1 6.8 k 0603 Current adjust resistor Samsung R2 51 0603 Bias resistor Samsung R3 0 0603 Bias resistor Samsung ASB Inc. [email protected] August 2017 ASL5463 3.2 Performance Table Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 1500 1700 1800 2000 2500 MHz Noise Figure 0.65 0.65 0.70 0.75 0.95 dB Gain 19.4 18.3 17.8 17.0 14.9 dB S11 -17.0 -18.0 -17.0 -15.0 -14.0 dB S22 -10.0 -10.0 -10.0 -11.0 -11.0 dB Output IP31) 32.0 33.0 34.0 37.0 38.0 dBm Output P1dB 20.0 20.0 20.0 20.0 20.0 dBm Current 45 mA Device Voltage +5 V 1) OIP3 is measured with two tones at the output power of +4 dBm/tone separated by 1 MHz. Plot of S-parameter & Stability Factor 30 7 S21 S-parameters (dB) 20 10 5 0 4 S22 -10 3 S11 -20 2 K -30 S12 -40 0 5/12 6 Stability Factor, K 3.3 1 0 500 1000 1500 2000 2500 3000 3500 4000 Frequency (MHz) ASB Inc. [email protected] August 2017 ASL5463 3.4 Plot of Noise Figure 1.4 1.2 NF (dB) 1 0.8 0.6 0.4 0.2 0 1500 6/12 1700 ASB Inc. 1900 2100 Frequency (MHz) [email protected] 2300 2500 August 2017 ASL5463 3.5 Plots of Noise Figure and Performances with Temperature 55 Current (mA) 50 45 40 35 30 25 -60 25 -40 -20 0 20 40 Temperature (°C) 60 80 100 2 Frequency = 2000 MHz 1.5 15 NF (dB) Gain (dB) 20 10 1 0.5 5 Frequency = 2000 MHz 0 0 -60 7/12 -40 -20 0 20 40 Temperature (°C) 60 80 100 ASB Inc. -60 [email protected] -40 -20 0 20 40 Temperature (°C) 60 80 100 August 2017 ASL5463 23 Frequency = 2000 MHz P1dB (dBm) 21 19 17 15 -60 8/12 ASB Inc. [email protected] -40 -20 0 20 40 Temperature (°C) 60 80 100 August 2017 ASL5463 4. Application: 1164 ~ 1610 MHz (Vsupply = +5 V) 4.1 Application Circuit & Evaluation Board Vdevice = +5 V R1 C5 C4 R2 R3 C3 L2 C2 L4 L1 RF OUT C1 RF IN ASL5463 L3 PCB Information Material FR4 Thickness (mm) 0.8 Size (mm) 40x40 EB No. EB-363-J2 Bill of Material 9/12 Symbol Value Size Description Manufacturer ASL5463 - - MMIC Amplifier ASB C1, C2 100 pF 0603 DC blocking capacitor Murata C3 22 pF 0603 Decoupling capacitor Murata C4, C5 1 F 0603 Decoupling capacitor Murata L1 6.8 nH 0603 RF choke inductor Murata L2 8.2 nH 0603 RF choke inductor Murata L3 18 nH 0603 Matching inductor Murata L4 5.6 nH 0603 Matching inductor Murata R1 10 k 0603 Current adjust resistor Samsung R2 51 0603 Bias resistor Samsung R3 0 0603 Bias resistor Samsung ASB Inc. [email protected] August 2017 ASL5463 4.2 Performance Table Supply voltage = +5 V, TA = +25 C, ZO = 50 Parameter Typical Unit Frequency 1164 1227 1575 1610 MHz Noise Figure 0.95 0.85 0.65 0.70 dB Gain 21.2 21.1 18.5 18.2 dB S11 -10.0 -14.0 -15.0 -14.0 dB S22 -8.0 -10.0 -10.0 -9.0 dB Output IP31) 28.0 28.0 32.0 33.0 dBm Output P1dB 18.0 18.0 18.5 18.5 dBm Current 28 mA Device Voltage +5 V 1) OIP3 is measured with two tones at the output power of +0 dBm/tone separated by 1 MHz. Plot of S-parameter & Stability Factor 30 7 S21 S-parameters (dB) 20 10 5 0 4 -10 -20 -30 -40 1000 10/12 6 3 S22 2 S11 S12 1 K 1200 ASB Inc. Stability Factor, K 4.3 1400 1600 Frequency (MHz) [email protected] 1800 0 2000 August 2017 ASL5463 5. Package Outline (SOT363, 2.1x2.0x1.0 mm) Symbols A A1 A2 b C D F E1 e e1 L Dimensions (In mm) MIN NOM 0.900 1.000 0.025 0.062 0.875 0.937 0.200 0.300 0.100 0.125 1.900 2.000 1.150 1.250 2.000 2.100 0.65BSC 1.30BSC 0.425REF MAX 1.10 0.10 1.00 0.40 0.15 2.10 1.35 2.20 6. Surface Mount Recommendation (In mm) 0.20 1.30 0.45 1.00 2.00 11/12 ASB Inc. [email protected] August 2017 ASL5463 7. Recommended Soldering Reflow Profile 260 C 20~40 sec Ramp-up (3 C/sec) Ramp-down (6 C/sec) 200 C 150 C 60~180 sec (End of Datasheet) Copyright 2014-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 12/12 ASB Inc. [email protected] August 2017