Advanced Power Electronics Corp. APE8805 600mA LOW DROPOUT LINEAR REGULATOR FEATURES DESCRIPTIOON Low Dropout Voltage of 600mV at 600mA The APE8805 series are low dropout, positive linear regulators with very low quiescent current. The APE8805 can supply 600mA output current with a low dropout voltage at about 600mV. The APE8805 regulator is able to operate with output capacitors as small as 1µF for stability. Other than the current limit protection APE8805 also offers on chip thermal shutdown feature providing protection against overload or any condition when the ambient temperature exceeds the junction temperature. The APE8805 series are available in fixed output voltage ranging from 1.5V, 1.8V, 2.0V, 2.5V, 2.8V, 3V and 3.3V. The APE8805 series are available in space-saving SOT-23, SOT-89, and SOT-223 packages. Guaranteed 600mA Output Current Very Low Quiescent Current at about 30uA Max. ± 2%Output Accuracy Needs Only 1µF Capacitor for Stability Thermal Shutdown Protection Current Limit Protection Low-ESR Ceramic Capacitor for Output Stability. Tiny Package: SOT-23, SOT-89 & SOT-223 RoHS Compliant & Halogen Free APPLICATIONS DVD/CD-ROMs, CD/RWs Wireless Devices LCD Modules Battery Power Systems Card Readers XDSL Routers TYPICAL APPLICATION . VIN VOUT APE8805 1uF CIN 1uF COUT GND Figure 1. Typical Application Circuit of APE8805 Note:To prevent oscillation, it is recommended to use minimum 1µF X7R or X5R dielectric capacitors if ceramics are used as input/output capacitors. ORDERING / PACKAGE INFORMATION TOP VIEW APE8805 X - X Package Type N : SOT-23 G : SOT-89 GR : SOT-89 K : SOT-223 KR : SOT-223 VIN SOT-89 (G) ( Top View ) SOT-89 (GR) ( Top View ) 1 1 SOT-223 (K) SOT-223 (KR) ( Top View ) ( Top View ) Output Voltage 15 : 1.5V 18 : 1.8V 20 : 2.0V 25 : 2.5V 28 : 2.8V 30 : 3.0V 33 : 3.3V SOT-23 GND 2 3 2 3 1 2 3 1 2 GND VIN 3 VOUT GND VIN VOUT VOUT GND VIN VOUT GND VIN VOUT Note:The devices are available in fixed voltages range of 1.5V, 1.8V, 2.0V, 2.5V, 2.8V, 3V & 3.3V. Please consult APEC sales office or authorized distributor for availability of special output voltages. Data and specifications subject to change without notice 1 20140707V9.1 Advanced Power Electronics Corp. APE8805 ABSOLUTE MAXIMUM RATINGS Supply Input Voltage (VIN) -------------------------------- 6V Power Dissipation (SOT-23) -------------------------------- 0.4W (SOT-89) -------------------------------- 0.57W (SOT-223) ------------------------------ 0.74W Storage Temperature Range ---------------------------- -65°C To 150°C Maximum Junction Temperature ------------------------ 150°C Lead Temperature (Soldering, 10sec, TLEAD) -------- 260°C Thermal Resistance from Junction to Ambient(RthJA) SOT-23 -------- 250oC/W SOT-89 -------- 175oC/W SOT-223 ------ 135oC/W Note. Stresses beyond those listed under “Absolute Maximum Ratings" may cause permanent damage to the device. RECOMMENDED OPERATING CONDITIONS Input Voltage (VIN) ------------------------------------------ 2.8 to 5.5V Operating Junction Temperature Range (TJ) -------- -40 to 125oC Ambient Temperature (TA) -------------------------------- -40 to 125oC ELECTRICAL SPECIFICATIONS ( VIN=VOUT+1V or VIN=2.8V whichever is greater, CIN=1µF, COUT=1µF, TA=25 ºC, unless otherwise specified) . Parameter SYM Output Voltage Accuracy ∆VOUT Current Limit Quiescent Current Standby Current Dropout Voltage (Note 1) ILIMIT IQ ISTBY VDROP Line Regulation ∆VLINE Load Regulation (Note 2) ∆VLOAD Ripple Rejection Temperature Coefficient Thermal Shutdown Temperature Thermal Shutdown Hysteresis PSRR TC TEST CONDITION IO=1mA MIN TYP MAX UNITS -2 - 2 % RLoad=1Ω - 650 - mA IO= 0mA - 30 55 µA VIN=2.8 ~ 5V, Output Off - - 0.1 µA 1.2V ≦ VOUT ≦ 2.0V - 1400 - 2.0V < VOUT ≦ 2.8V - 800 - 2.8V < VOUT ≦ 4.5V - 600 - IO=1mA, VIN=VOUT +1V or 5V - 1 5 mV IO=0mA to 600mA - 13 50 mV - 60 - dB - 50 - ppm/ oC - 160 - o - o IO=600mA VIN=VOUT+1V COUT=1uF, fRIPPLE = 120Hz IOUT = 1mA, VIN = 5V TSD ∆TSD - 25 mV C C Note 1:The dropout voltage is defined as V IN-VOUT, which is measured when VOUT drop about 100mV. Note 2:Regulation is measured at a constant junction temperature by using 40ms current pulse and load regulation in the load range from 0mA to 600mA. 2 Advanced Power Electronics Corp. APE8805 PIN DESCRIPTIONS PIN SYMBOL PIN DESCRIPTION VIN Power is supplied to this device from this pin which is required an input filter capacitor. In general, the input capacitor in the range of 1µF to 10µF is sufficient. The output supplies power to loads. The output capacitor is required to prevent output voltage unstable. The VOUT APE8805 is stable with an output capacitor 1µF or greater. The larger output capacitor will be required for application with large transit load to limit peak voltage transits, besides could reduce output noise, improve stability, PSRR. GND Common ground pin BLOCK DIAGRAM . Figure 2. Block Diagram of APE8805 3 Advanced Power Electronics Corp. APE8805 APPLICATION INFORMATIO The APE8805 series are low dropout linear regulators that could provide 600mA output current at dropout voltage about 600mV. Besides, current limit and on chip thermal shutdown features provide protection against any combination of overload or ambient temperature that could exceed junction temperature. Output & Input Capacitor The APE8805 regulator is designed to be stable with a wide range of output capacitors. The ESR of the output capacitor affects stability. Larger value of the output capacitor decreases the peak deviations and provides to improve transition response for larger current changes. The capacitor types (aluminum, ceramic, and tantalum) have different characterizations such as temperature and voltage coefficients. All ceramic capacitors are manufactured with a variety of dielectrics, each with different behavior across temperature and applications. Common dielectrics used are X5R, X7R and Y5V. It is recommended to use 1uF to 10uF X5R or X7R dielectric ceramic capacitors with 30mΩ to 50mΩ ESR range betw- een device outputs to ground for transient stability. The APE8805 is designed to be stable with low ESR ceramic capacitors and higher values of capacitors and ESR could improve output stability. So the ESR could improve output stability. So the it generates a zero to provide phase lead for loop stability. There are no requirements for the ESR on the input capacitor, but its voltage and temperature coefficient have to be considered for device application environment. Protection Features In order to prevent overloading or thermal condition from damaging device, APE8805 regulator has internal thermal and current limiting functions designed to protect the device. It will rapidly shut off PMOS pass element during overloading or over temperature condition. . Thermal Consideration The power handling capability of the device will be limited by maximum operation junction temperature (125°C). The power dissipated by the device will be estimated by : PD = IOUT x (VIN-VOUT). The power dissipation should be lower than the maximum power dissipation listed in “ Absolute Maximum Ratings” section. 4 Advanced Power Electronics Corp. APE8805 TYPICAL PERFORMANCE CHARACTERISTICS Quiescent Current vs. Input Voltage Quiescent Current vs. Input Voltage 50 50 Vout=3.3V Cin=1uF Cout=1uF Quiescent Current (uA) Quiescent Current (uA) Vout=1.8V Cin=1uF Cout=1uF 45 40 35 30 45 40 35 30 3.0 3.5 4.0 4.5 5.0 5.5 6.0 3.0 3.5 4.0 Input Voltage(V) Current Limit vs. Input Voltage 6.0 Vout=3.3V Cin=1uF Cout=1uF 800 750 . 800 Current Limit(mA) 700 Current Limit(mA) 5.5 Current Limit vs. Input Voltage Vout=1.8V Cin=1uF Cout=1uF 850 750 700 650 3.0 3.5 4.0 4.5 5.0 5.5 6.0 3.5 4.0 Input Voltage(V) 4.5 5.0 5.5 6.0 Input Voltage(V) Current limit vs. Temperature Current limit vs. Temperature 850 850 Vin=5V Vout=1.8V Cin=1uF Cout=1uF 800 Current Limit(mA) Current Limit(mA) 5.0 850 650 800 4.5 Input Voltage(V) 750 700 Vin=5V Vout=3.3V Cin=1uF Cout=1uF 750 700 650 650 -25 0 25 50 0 Temperature( C) 75 100 125 -25 0 25 50 75 100 125 0 Temperature( C) 5 Advanced Power Electronics Corp. APE8805 TYPICAL PERFORMANCE CHARACTERISTICS Quiescent Current vs. Temperature Quiescent Current vs. Temperature 60 Vin=5V Vout=1.8V Cin=1uF Cout=1uF 50 Quiescent Current(uA) Quiescent Current(uA) 60 40 30 Vin=5V Vout=3.3V Cin=1uF Cout=1uF 50 40 30 20 20 -25 0 25 50 75 100 -50 125 -25 0 50 75 100 125 Temperature( C) Temperature Stability Temperature Stability 3.40 1.90 Vin=5V Cin=1uF Cout=1uF Vin=5V Cin=1uF Cout=1uF 3.35 1.85 1.80 . 1.75 1.70 Output Voltage(V) Output Voltage(V) 25 0 0 Temperature( C) 3.30 3.25 3.20 -25 0 25 50 75 100 125 0 -25 0 25 50 75 100 125 0 Temperature( C) Temperature( C) Dropout Voltage vs. Loading Current 1000 Cin=1uF Cout=1uF Vout=3.3V Dropout Voltage(mV) 800 0 Tj=125 C 0 Tj=85 C 600 0 Tj=25 C 400 0 Tj=-40 C 200 0 0 100 200 300 400 500 600 Loading Current(mA) 6 Advanced Power Electronics Corp. APE8805 TYPICAL PERFORMANCE CHARACTERISTICS Load Transition Response Load Transition Response VIN=4V IOUT= 1mA to150mA, VOUT=3.3V CIN=1uF COUT=1uF VIN=4V IOUT=1mA to 150mA, VOUT=3.3V CIN=1uF COUT=4.7uF Line Transition Response Line Transition Response VIN=3V to 4V IOUT=10mA, VOUT= 1.8V CIN=1uF COUT=1uF VIN=3V to 4V IOUT=10mA, VOUT= 1.8V CIN=1uF COUT=4.7uF . 7 Advanced Power Electronics Corp. APE8805 MARKING INFORMATION SOT-23 Part Number : R7 Output Voltage : see Identification Code VOUT Code VOUT A 1.5V B 1.8V R7&SS Date Code : SS SS:2004,2008,2012… SS:2003,2007,2011… SS:2002,2006,2010… SS:2001,2005,2009… P 2.0V C 2.5V D 2.8V E 3.0V F 3.3V SOT-89 Part Number : APE8805G : 8805 APE8805GR : 885R Output Voltage : see Identification Code VOUT Code 88XX& YWWS Date Code (YWWS) Y:Year WW:Week S:Sequence VOUT A 1.5V B 1.8V P 2.0V C 2.5V D 2.8V E 3.0V F 3.3V . SOT-223 Part Number : APE8805K : 8805 APE8805KR : 8805R Output Voltage : see Identification Code 8805X-&& YWWSSS Date Code (YWWSSS) Y:Year WW:Week SSS:Sequence VOUT Code VOUT 15 1.5V 18 1.8V 20 2.0V 25 2.5V 28 2.8V 30 3.0V 33 3.3V 8