Allied LRC30-6R8M-RC Low resistance chip inductor Datasheet

RoHS
LRC30
Low Resistance Chip Inductors
0.102±0.008
(2.59±0.20)
0.177±0.012
(4.50±0.30)
Dimensions:
Inches
(mm)
0.126±0.008
(3.20±0.20)
0.177±0.012
(4.50±0.30)
0.142±0.008
(3.61±0.20)
0.098
(2.49)
0.126±0.008
(3.20±0.20)
0.118
(3.00)
0.059
(1.50)
0.059
(1.50)
Features
0.059
(1.50)
Allied
Part
Number
Inductance
(µh)
Tolerance
(%)
Test
Freq.
(MHz)
SRF
Min.
(MHz)
magnetic path construction inductors
LRC30-1R0M-RC
1.0
20
1
100
0.08
1080
with low DCR, high current capacity
LRC30-1R5M-RC
1.5
20
1
85
0.09
1000
and high impedance characteristics.
LRC30-2R2M-RC
2.2
20
1
60
0.11
900
LRC30-3R3M-RC
3.3
20
1
47
0.13
800
LRC30-4R7M-RC
4.7
20
1
35
0.15
750
in DC/DC converter and DC power
LRC30-6R8M-RC
6.8
20
1
30
0.20
720
supply circuits.
LRC30-100K-RC
10
10
1
23
0.24
650
Electrical
LRC30-150K-RC
15
10
1
20
0.32
570
Inductance Range: 1.0µh to 470µh
LRC30-220K-RC
22
10
1
15
0.60
420
LRC30-330K-RC
33
10
1
12
1.00
310
LRC30-470K-RC
47
10
1
10
1.10
280
LRC30-680K-RC
68
10
1
8.4
1.70
220
LRC30-101K-RC
100
10
1
6.8
2.20
190
LRC30-151K-RC
150
10
1
5.5
3.50
130
LRC30-221K-RC
220
10
1
4.5
4.00
110
10% typical.
LRC30-331K-RC
330
10
1
3.6
6.80
100
Resistance to Soldering Heat: Pre heat:
LRC30-471K-RC
470
10
1
3.0
8.50
90
LRC30-561K-RC
560
10
.001
2.5
10.4
80
LRC30-681K-RC
680
10
.001
2.2
14.7
70
LRC30-102K-RC
1000
10
.001
2.0
27.9
50
LRC30-152K-RC
1500
10
.001
1.8
35.0
40
• Miniature SMT wire-wound open
• Excellent solder heat resistance for
DCR
Max.
(Ω)
Rated
Current
(mA)
flow and reflow soldering methods.
• Excellent for use as choke coils
Tolerance: For 20% use M, 10% use K
and 5% use J as part number suffix.
Test Frequency: Inductance measured at
1MHz for all values. Except 560µh thru
1500µh, which are tested at 1 KHz.
ll
Operating Temp. Range: i-25° to +85
Rated Current: Based on Temperature
rise not to exceed 35ºC. Inductance Drop
150ºC ± 10ºC / 1-2 min. Solder temp:
260ºC ± 5ºC for 10 sec. ± 1 sec.
Physical
Packaging: 500 pieces per 7 inch reel.
2500 pieces per 13 inch reel.
Available in tighter tolerances.
All specifications subject to change without notice.
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
Revised 03-25-08
www.alliedcomponents.com