ŎŕŅijııĶ ․ ع㐳㧛 Features ٨ ቯ㔚ᵹᓮᯏ⢻㧔ᵄᢙ࿕ቯઁޔബᑼ㧕 ٨ Constant Current Control Function (Fixed Frequency PWM Control) ٨ 2 ⋧ജ㧔1-2 ⋧ബ⏛ߪ ENA ࠍ૬↪㧕 ٨ 2-Phase Input (Half Step Drive Uses ENA Together) ٨ 㔚ᵹᷫࡕ࠼ಾᦧᯏ⢻㧔ࡑࠗࠢࡠࠬ࠹࠶ࡊ㚟േኻᔕ㧕 ٨ Current Decay Mode (Fast Decay or Slow Decay) ٨ ࡁࠗ࠭ࠠࡖࡦ࡞ᯏ⢻ ٨ Noise Cancellation Function ٨ ⽾ㅢ㔚ᵹ㒐ᱛᯏ⢻ ٨ Cross Conduction Protection ٨ ㆊᾲࠕࡓᯏ⢻ ٨ Overheating Alarm Function ٨ ㅒ㔚ജๆ࠳ࠗࠝ࠼ౝ⬿ ٨ Built-in Flywheel and Flyback Diodes ⛘ عኻᦨᄢቯᩰ㧛 Absolute Maximum Ratings ․ߦᜰቯߥ߈႐วߪTa=25͠㧛Ta=25͠ unless otherwise specified 㗄ޓޓ⋡ޓParameter ࡠࠫ࠶ࠢ㔚Ḯ㔚 Logic Supply Voltage ࡠࠫ࠶ࠢജ㔚 Logic Input Voltage ࡕ࠲㔚Ḯ㔚 Load Supply Voltage ജ㔚ᵹ Output Current ࡈࠗࡎࠗ࡞࠳ࠗࠝ࠼㔚ᵹ Flywheel Diode Current ⸵ኈ៊ᄬ Power Dissipation ሽ᷷ᐲ Storage Temperature ធวㇱ᷷ᐲ Junction Temperature ijĺ 㧔U170-1㧕 ⸥ภޓSymbol ቯᩰ୯ޓRating නޓUnit VCC 0㨪6 V VLOGIC 0 㨪 VCC V Vmm 60 V IC 1.3 A If 1.3 A PD 5 W Tstg -40 㨪 150 ͠ Tj 150 ͠ www.shindengen.co.jp/product/semi/ ع㔚᳇⊛․ᕈ㧛 Electrical Characteristics ․ߦᜰቯߥ߈႐วߪTa=25͠,VCC=5V㧛Ta=25͠,VCC=5V unless otherwise specified 㗄ޓޓ⋡ޓParameter Output stage ജ㘻㔚 Output Saturation Voltage 㩿Upper side㪀 ਅജ㘻㔚 Output Saturation Voltage 㩿Lower side㪀 ജࠢ㔚ᵹ Output Leakage Current 㩿Upper side㪀 ਅജࠢ㔚ᵹ Output Leakage Current 㩿Lower side㪀 ࠳ࠗࠝ࠼㗅㔚 Diode Forward Drop 㩿Upper side㪀 ਅ࠳ࠗࠝ࠼㗅㔚 Diode Forward Drop 㩿Lower side㪀 ⸥ภޓSymbol ᷹ቯ᧦ઙޓCondition min. typ. max. නޓUnit VCE 㩿SAT㪀㩷H IC=0.8A - 1.0 1.4 V VCE 㩿SAT㪀㩷L IC=0.8A - 1.0 1.4 V IrH Vmm=60V, VOUT=0V - - 10 ǴA IrL VOUT=60V, VRs=0V - - 10 ǴA V FH If=0.8A - 1.3 1.6 V VFL If=0.8A - 1.3 1.5 V ICC (ON) VENA=0A - 25 33 mA ICC (OFF) VENA=5V - 19 26 mA VPHA/ENA/DECH 2.3 - VCC V VPHA/ENA/DECL GND - 0.8 V VPHA/ENA/DEC=5V - - 10 ǴA VPHA/ENA=0V - -100 -150 ǴA IDECL VDEC=0V - -200 -300 ǴA Iref Vref=0V - -1 -10 ǴA Is Vs=0V - -1 -10 ǴA Ct=4700pF,Rt=13kǡ - 22 - kHz Ct=4700pF - 2.2 - Ǵs - - 1.0 V Valm=5V - - 10 ǴA Valm=0.5V - - 2 mA - 140 - ͠ Logic stage VCC ᶖ⾌㔚ᵹ㧔2 ࿁〝 ON ᤨ㧕 Logic Supply Current 㩿2 Circuit ON㪀 VCC ᶖ⾌㔚ᵹ㧔2 ࿁〝 OFF ᤨ㧕 Logic Supply Current 㩿2 Circuit OFF㪀 Phase/Enable/Decay̌H̍ജ㔚 Phase/Enable/Decay̌H̍Input Voltage Phase/Enable/Decay̌L̍ജ㔚 Phase/Enable/Decay̌L̍Input Voltage Phase/Enable/Decay̌H̍ജ㔚ᵹ Phase/Enable/Decay̌H̍Input Current Phase/EnablěL̍ജ㔚ᵹ Phase/EnablěL̍Input Current Decay̌L̍ജ㔚ᵹ Decay̌L̍Input Current Vref ജ㔚ᵹ Vref Input Current Vs ജ㔚ᵹ Vs Input Current ࠴࡚࠶ࡇࡦࠣᵄᢙ Chopping Frequency ࡉࡦࠠࡦࠣ࠲ࠗࡓ Blanking Time Vs ᦨᄢ㔚 Vs Maximum Voltage ㆊᾲࠕࡓ┵ሶṳࠇ㔚ᵹ Thermal Alarm Leakage Current ㆊᾲࠕࡓേ┵ሶ㔚ᵹ Thermal Alarm Output Current ㆊᾲࠕࡓേ᷷ᐲ Thermal Alarm Operating Temperature IPHA/ENA/DECH IPHA/ENAL fchop tb Vs (max) Ir (alm) Ialm Talm www.shindengen.co.jp/product/semi/ 㧔U170-1㧕 Ĵı ŎŕŅijııĶ عၮᧄᔕ↪࿁〝㧛 Typical Application عផᅑ࿁〝ቯᢙ㧛 Recommended External Components Value ⸥ภޓSymbol ផᅑ୯ޓRecommendation නޓUnit Rs 0.68 ǡ Rt 13 kǡ Ct 4700 pF R1+R2 ҇ 10 kǡ عផᅑേ᧦ઙ㧛 Recommended Operating Conditions ․ߦᜰቯߥ߈႐วߪTa=25͠㧛Ta=25͠ unless otherwise specified 㗄⋡ޓParameter ធวㇱ᷷ᐲ Junction Temperature ࡠࠫ࠶ࠢ㔚Ḯ㔚 Logic Supply Voltage ࡕ࠲㔚Ḯ㔚 Load Supply Voltage ⸥ภޓSymbol ផᅑ୯ޓRecommendation නޓUnit Tj -25 㨪 120 ͠ VCC 4.75 㨪 5.25 V Vmm 5 㨪 54 V عജ㔚ᵹ㧘࠴࡚࠶ࡇࡦࠣᵄᢙߩ⸳ቯ㧛 Setting of Output Current and Chopping Frequency ٤ ജ㔚ᵹ⸳ቯᑼ㧛 Output Current Setting lchop Vref 㪲A㪴 Rs Constant current waveform 㩿Motor current㪀 ٤ ࠴࡚࠶ࡇࡦࠣᵄᢙ⸳ቯᑼ㧛 Chopping Frequency Setting fchop 1 㪲Hz㪴 0.72 × Ct × Rt ĴIJ 㧔U170-1㧕 www.shindengen.co.jp/product/semi/ T=1/fchop Ichop ࡦࡇ ع㈩⟎࿑㧛 Pin Assignment MARKING SIDE VIEW MTD2005 Pin 27 Pin 26 Pin 25 Pin 24 Pin 23 Pin 22 Pin 21 Pin 20 Pin 19 Pin 18 Pin 17 Pin 16 Pin 15 Pin 14 Pin 13 Pin 12 Pin 11 Pin 10 Pin 9 Pin 8 Pin 7 Pin 6 Pin 5 Pin 4 Pin 3 Pin 2 Pin 1 Vs B Vref B Vcc Decay Phase B ENA B LG B Vmm B NC OUT 4 Rs B NC NC OUT 3 PG OUT 2 Rs A OUT 1 NC Vmm A LG A ENA A Phase A CR ALARM Vref A Vs A Package ZIP27 ⌀ عℂ୯㧛 Truth Table ENA A or B PHA A or B OUT 1 or 4 OUT 2 or 3 L L L H L H H L OFF OFF H : don't care DECAY Decay Mode Switching Transistor L Fast Both source and sink transistor H Slow Only source transistor www.shindengen.co.jp/product/semi/ 㧔U170-1㧕 Ĵij ご 注 意 1. ご採用に際しては、別途仕様書をご請求の上、ご確認をお願いいたします。 2. 本資料に記載されている当社製品の品質水準は、一般的な信頼度が要求される標準用途を意図しています。 その製品の故障や誤動作が直接生命や人体に影響を及ぼすような極めて高い品質、信頼度を要求される特 別、特定用途の機器、装置にご使用の場合には必ず事前に当社へご連絡の上、確認を得て下さい。 当社の 製品の品質水準は以下のように分類しております。 【標準用途】 コンピュータ、OA 等の事務機器、通信用端末機器、計測器、AV 機器、アミューズメント機器、家電、 工作機器、パーソナル機器、産業用機器等 【特別用途】 輸送機器（車載、船舶等）、基幹用通信機器、交通信号機器、防災/防犯機器、各種安全機器、医療 機器等 【特定用途】 原子力制御システム、航空機器、航空宇宙機器、海底中継機器、生命維持のための装置、システム 等 3. 当社は品質と信頼性の向上に絶えず努めていますが、必要に応じ、安全性を考慮した冗長設計、延焼防止 設計、誤動作防止設計等の手段により結果として人身事故、火災事故、社会的な損害等が防止できるようご 検討下さい。 4. 本資料に記載されている内容は、製品改良などのためお断りなしに変更することがありますのでご了承下さ い。製品のご購入に際しましては事前に当社または特約店へ最新の情報をご確認下さい。 5. 本資料の使用によって起因する損害または特許権その他権利の侵害に関しては、当社は一切その責任を負 いません。 6. 本資料によって第三者または当社の特許権その他権利の実施に対する保証または実施権の許諾を行うもの ではありません。 7. 本資料に記載されている製品が、外国為替及び外国貿易管理法に基づき規制されている場合、輸出には同 法に基づく日本国政府の輸出許可が必要です。 8. 本資料の一部または全部を当社に無断で転載または複製することを堅くお断りいたします。 Notes 1. If you wish to use any such product, please be sure to refer to the specifications issued by Shindengen. 2. All products described or contained herein are designed with a quality level intended for use in standard applications requiring an ordinary level of reliability. If these products are to be used in equipment or devices for special or specific applications requiring an extremely high grade of quality or reliability in which failures or malfunctions of products may directly affect human life or health, a local Shindengen office must be contacted in advance to confirm that the intended use of the product is appropriate. Shindengen products are grouped into the following three applications according the quality grade. 【Standard applications】 Computers, office automation and other office equipment, communication terminals, test and measurement equipment, audio/visual equipment, amusement equipment, consumer electronics, machine tools, personal electronic equipment, industrial equipment, etc. 【Special applications】 Transportation equipment (vehicles, ships, etc.), trunk-line communication equipment, traffic signal control systems, anti-disaster/crime systems, safety equipment, medical equipment, etc. 【Specific applications】 Nuclear reactor control systems, aircraft, aerospace equipment, submarine repeaters, life support equipment and systems, etc. 3. Although Shindengen continuously endeavors to enhance the quality and reliability of its products, customers are advised to consider and take safety measures in their design, such as redundancy, fire containment and anti-failure, so that personal injury, fires, or societal damages can be prevented. 4. Please note that all information described or contained herein is subject to change without notice due to product upgrades and other reasons. When buying Shindengen products, please contact the Companyʼs offices or distributors to obtain the latest information. 5. Shindengen shall not bear any responsibility with regards to damages or infringement of any third-party patent rights and other intellectual property rights incurred due to the use of information on this website. 6. The information and materials on this website neither warrant the use of Shindengen's or any third partyʼs patent rights and other intellectual property rights, nor grant license to such rights. 7. In the event that any product described or contained herein falls under the category of strategic products controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, exporting of such products shall require an export license from the Japanese government in accordance with the above law. 8. No reprinting or reproduction of the materials on this website, either in whole or in part, is permitted without proper authorization from Shindengen.