DIODES 74LVC2G04DW-7

74LVC2G04
DUAL INVERTER GATE
Description
Pin Assignments
The 74LVC2G04 is a dual inverter gate with standard push-
(Top View)
pull outputs. The device is designed for operation with a
power supply range of 1.65V to 5.5V. The inputs are tolerant
1A 1
6 1Y
GND 2
5 VCC
3
4 2Y
to 5.5V allowing this device to be used in a mixed voltage
environment. The device is fully specified for partial power
down applications using IOFF. The IOFF circuitry disables the
2A
NEW PRODUCT
output preventing damaging current backflow when the
device is powered down.
SOT26/SOT363
The gate performs the positive Boolean function:
Y=A
(Top View)
1A
1
6
1Y
GND
2
5
VCC
2A
3
4
2Y
DFN1010
Features
Applications
•
Wide Supply Voltage Range from 1.65V to 5.5V
•
Voltage Level Shifting
•
±24mA Output Drive at 3.0V
•
General Purpose Logic
•
CMOS low power consumption
•
Power Down Signal Isolation
•
IOFF Supports Partial-Power-Down Mode Operation
•
•
Inputs accept up to 5.5V
o
PCs, networking, notebooks, netbooks, PDAs
ESD Protection Tested per JESD 22
•
o
Computer peripherals, hard drives, CD/DVD ROM
o
Exceeds 200-V Machine Model (A115-A)
o
TV, DVD, DVR, set top box
o
Exceeds 2000-V Human Body Model (A114-A)
o
Cell Phones, Personal Navigation / GPS
o
Exceeds 1000-V Charged Device Model (C101)
o
MP3 players ,Cameras, Video Recorders
•
Latch-Up Exceeds 100mA per JESD 78, Class II
•
Range of Package Options
•
Wide array of products such as:
SOT26, SOT363, and DFN1010 Available in “Green”
Molding Compound (no Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
74LVC2G04.
Document number: DS35160 Rev 3 - 2
1 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
NEW PRODUCT
Pin Descriptions
Pin Name
Pin NO.
Description
1A
GND
2A
2Y
Data Input
Ground
Data Input
Data Output
VCC
1
2
3
4
5
1Y
6
Data Output
Supply Voltage
Logic Diagram
1A
2A
1
6
3
4
1Y
2Y
Function Table
Inputs
A
Output
Y
H
L
L
H
74LVC2G04.
Document number: DS35160 Rev 3 - 2
2 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Absolute Maximum Ratings (Note 2)
Symbol
ESD HBM
ESD CDM
ESD MM
NEW PRODUCT
VCC
Description
ESD Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
Unit
2
1
200
KV
KV
V
Supply Voltage Range
-0.5 to 6.5
V
VI
Input Voltage Range
-0.5 to 6.5
V
VO
Voltage applied to output in high impedance or IOFF state
-0.5 to 6.5
V
VO
Voltage applied to output in high or low state.
IIK
Input Clamp Current VI<0
IOK
Output Clamp Current
-50
mA
IO
Continuous output current
±50
mA
±100
mA
TJ
Operating Junction Temperature
-40 to 150
°C
Storage Temperature
-65 to 150
°C
Continuous current through Vdd or GND
TSTG
Notes:
Rating
-0.3 to VCC +0.5
V
-50
mA
2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
74LVC2G04.
Document number: DS35160 Rev 3 - 2
3 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Recommended Operating Conditions (Note 3)
Symbol
VCC
Parameter
Operating Voltage
Operating
Data retention only
VCC = 1.65V to 1.95V
VIH
High-level Input Voltage
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
NEW PRODUCT
VCC = 4.5V to 5.5V
Min
Max
Unit
1.65
1.5
5.5
V
V
0.65 X VCC
1.7
0.7 X VCC
VCC = 1.65V to 1.95V
VIL
Low-level input voltage
V
2
0.35 X VCC
VCC = 2.3V to 2.7V
0.7
VCC = 3V to 3.6V
0.8
VCC = 4.5V to 5.5V
V
0.3 X VCC
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
IOH
High-level output current
VCC = 1.65V
-4
VCC = 2.3V
-8
VCC = 3V
-16
-24
VCC = 4.5V
-32
VCC = 1.65V
4
VCC = 2.3V
IOL
Low-level output current
Δt/ΔV
Input transition rise or fall rate
TA
Operating free-air temperature
8
16
VCC = 3V
mA
24
VCC = 4.5V
32
VCC = 1.8V ± 0.15V, 2.5V ± 0.2V
20
VCC = 3.3V ± 0.3V
10
VCC = 5V ± 0.5V
Notes:
mA
ns/V
5
-40
125
ºC
3. Unused inputs should be held at VCC or Ground.
74LVC2G04.
Document number: DS35160 Rev 3 - 2
4 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Electrical Characteristics
Symbol
Parameter
Test Conditions
IOH = -100μA
VOH
High Level Output
Voltage
NEW PRODUCT
Low Level Output
Voltage
1.65V to 5.5V
VCC – 0.1
VCC – 0.1
1.65V
1.2
0.95
IOH = -8mA
2.3V
1.9
1.7
2.4
1.9
IOH = -16mA
3V
IOH = -32mA
4.5V
IOL = 100μA
2.0
3.8
3.4
1.65V to 5.5V
0.1
0.1
1.65V
0.45
0.70
IOL = 8mA
2.3V
0.3
0.45
0.4
0.60
0.55
0.80
IOL = 16mA
3V
IOL = 32mA
Input Current
2.3
VI = 5.5 V or GND
Unit
V
IOL = 4mA
IOL = 24mA
II
-40ºC to 125ºC
Min
Max
IOH = -4mA
IOH = -24mA
VOL
40ºC to 85ºC
Min
Max
VCC
V
4.5V
0.55
0.80
0 to 5.5V
±5
± 20
μA
0
± 10
± 20
μA
IOFF
Power Down Leakage
VI or VO = 5.5V
Current
ICC
Supply Current
VI = 5.5V of GND
IO=0
1.65V to 5.5V
10
40
μA
Additional Supply
Current
Input at VCC –0.6V
3 V to 5.5V
500
5000
μA
ΔICC
Package Characteristics (All typical values are at VCC = 3.3V, TA = 25°C)
Symbol
Notes:
Parameter
CI
Input Capacitance
θJA
Thermal Resistance
Junction-to-Ambient
θJC
Thermal Resistance
Junction-to-Case
Test Conditions
VCC
VI = VCC – or GND
3.3
4
SOT363
DFN1010
SOT26
(Note 4)
371
430
52
o
C/W
SOT363
DFN1010
(Note 4)
143
190
o
C/W
SOT26
Min
Typ.
Max
Unit
pF
204
4. Test condition for SOT26, SOT363 and DFN1010: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC2G04.
Document number: DS35160 Rev 3 - 2
5 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Switching Characteristics
NEW PRODUCT
TA= -40°C to 85°C, CL = 30 or 50pF (see Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tpd
A
Y
VCC = 1.8 V
± 0.15V
Min
Max
VCC = 2.5V
± 0.2V
Min
Max
VCC = 3.3V
± 0.3V
Min
Max
VCC = 5V
± 0.5V
Min
Max
0.5
1.0
0.5
0.5
8.0
4.4
4.1
3.2
Unit
ns
TA= -40°C to 125°C, CL = 30 or 50pF (see Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tpd
A
Y
VCC = 1.8V
± 0.15V
Min
Max
VCC = 2.5V
± 0.2V
Min
Max
VCC = 3.3V
± 0.3V
Min
Max
VCC = 5V
± 0.5V
Min
Max
0.5
0.5
0.5
0.5
9.5
5.4
5.5
3.8
Unit
ns
Operating Characteristics
TA = 25 ºC
Parameter
Cpd
Power dissipation
capacitance
74LVC2G04.
Document number: DS35160 Rev 3 - 2
Test
Conditions
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
Typ.
Typ.
Typ.
Typ.
f = 10 MHz
17
19
20
21
6 of 12
www.diodes.com
Unit
pF
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
NEW PRODUCT
Parameter Measurement Information
VCC
Inputs
VM
CL
≤2ns
VCC/2
30 pF
1 KΩ
≤2ns
VCC/2
30 pF
500 Ω
≤2.5ns
1.5 V
50 pF
500 Ω
≤2.5ns
VCC/2
50 pF
500 Ω
VI
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
3.3V±0.3V
3V
5V±0.5V
VCC
RL
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74LVC2G04.
Document number: DS35160 Rev 3 - 2
7 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Ordering Information
NEW PRODUCT
74LVC2G 04 XX - 7
Logic Device
Function
Package
Packing
74 : Logic Prefix
LVC : 1.65 to 5.5V
Family
2G : Two gates
04 : Inverter / Driver
W6 : SOT26
DW : SOT363
FW4 : DFN1010
7” Tape and Reel
Part Number Suffix
Device
Package
Code
Packaging
(Note 5)
Quantity
74LVC2G04W6-7
74LVC2G04DW-7
74LVC2G04FW4-7
W6
DW
FW4
SOT26
SOT363
DFN1010
3000/Tape & Reel
3000/Tape & Reel
5000/Tape & Reel
Notes:
7 : Tape & Reel
-7
-7
-7
5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf
74LVC2G04.
Document number: DS35160 Rev 3 - 2
8 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Marking Information
(1) SOT26, SOT363
7
4
7
5
6
NEW PRODUCT
XX Y W X
1
2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal Code
Part Number
Package
Identification Code
74LVC2G04W6
74LVC2G04DW
SOT26
SOT363
Z2
Z2
Part Number
Package
Identification Code
74LVC2G04FW4
DFN1010
Z2
(2) DFN1010
Package Outline Dimensions (All Dimensions in mm)
74LVC2G04.
Document number: DS35160 Rev 3 - 2
9 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
NEW PRODUCT
(1) Package Type: SOT26
(2) Package Type: SOT363
C
L
0.10/0.30
C
L
1.9
C
L
1.15/1.35
6x-0.42
C
L
6x-0.60
2.0/2.2
4x-0.65
PIN 1
0.40/0.45
0.65Bsc.
Land Pattern Recommendation
(unit:mm)
1.8/2.2
0.1/0.22
0.9/1.0
0/0.1
1.10Max.
C
L
"A"
Detail"A"
0.25/0.40
74LVC2G04.
Document number: DS35160 Rev 3 - 2
0°/8
°
0.25
Gauge Plane
10 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
Package Outline Dimensions (All Dimensions in mm)
Seating Plane
Side View
0.08 C
0.08 C
74LVC2G04.
Document number: DS35160 Rev 3 - 2
0.20(6x)
Pin1
0.35Typ.
0.14/0.20(6x)
0.15Min.
A
0.15
0.95/1.05
0.35Typ.
Pin1
0.15Min.
0.07Typ.
0.35/0.45(6x)
2x-
C
0.235
0.95/1.05
B
0.05/0.15
2X-
NEW PRODUCT
0/0.05
0.08 C
0.45(6x)
0.40Max.
0.05 C
6x-
0.13Typ.
(3) Package Type: DFN1010
Land Pattern Recommendation
(unit:mm)
Top View
0.07
C A B
Bottom View
11 of 12
www.diodes.com
June 2011
© Diodes Incorporated
74LVC2G04
DUAL INVERTER GATE
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
74LVC2G04.
Document number: DS35160 Rev 3 - 2
12 of 12
www.diodes.com
June 2011
© Diodes Incorporated