MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E Size: 2.0in x 1.0in x 0.4in (50.8mm x 25.4mm x 10.2mm) OPTIONS • Heatsink • Negative Logic Remote ON/OFF (Suffix “R”) • Input Range • Output Voltage APPLICATIONS • • • • • FEATURES • • • • • • • • 20 Watts Maximum Output Power • Output Current up to 6A • Single and Dual Outputs • Standard 2.0in x 1.0in x 0.4in Package • 2:1 Input Voltage Range • High Efficiency up to 89% • 1600VDC I/O Isolation • Remote ON/OFF Control • Fixed Switching Frequency Short Circuit, Over Voltage, and Over Load Protection Six-Sided Continuous Shield CE Marked UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals ISO9001 Certified Manufacturing Facilities RoHS & REACH compliant Heatsink Option DESCRIPTION Wireless Networks Telecom/Datacom Industry Control Systems Measurement Equipment Semiconductor Equipment The MD series of DC/DC power converters provides up to 20 Watts of output power in a standard 2.0 x 1.0 x 0.4 inch package. This series has single and dual output models with 2:1 input voltage ranges of 918VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency up to 89%, 1600VDC I/O isolation, remote ON/OFF, and voltage adjustability. This series is also protected against over voltage, over load, and short circuit conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety approvals. MODEL SELECTION TABLE Single Output Model Number MD12S1.5-6000 MD12S1.8-6000 MD12S2.5-6000 MD12S3.3-5000 MD12S5-4000 MD12S12-1670 MD12S15-1330 MD24S1.5-6000 MD12S1.8-6000 MD24S2.5-6000 MD24S3.3-5000 MD24S5-4000 MD24S12-1670 MD24S15-1330 MD48S1.5-6000 MD48S1.8-6000 MD48S2.5-6000 MD48S3.3-5000 MD48S5-4000 MD48S12-1670 MD48S15-1330 1/9/2018 Input Voltage Range 12VDC (9~18) 24VDC (18~36VDC) 48VDC (36-75VDC) Output Voltage 1.5VDC 1.8VDC 2.5VDC 3.3VDC 5VDC 12VDC 15VDC 1.5VDC 1.8VDC 2.5VDC 3.3VDC 5VDC 12VDC 15VDC 1.5VDC 1.8VDC 2.5VDC 3.3VDC 5VDC 12VDC 15VDC Output Current Min Load Max Load 0mA 6000mA 0mA 6000mA 0mA 6000mA 0mA 5000mA 0mA 4000mA 0mA 1670mA 0mA 1330mA 0mA 6000mA 0mA 6000mA 0mA 6000mA 0mA 5000mA 0mA 4000mA 0mA 1670mA 0mA 1330mA 0mA 6000mA 0mA 6000mA 0mA 6000mA 0mA 5000mA 0mA 4000mA 0mA 1670mA 0mA 1330mA Ripple & Noise(1) 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 75mVp-p 75mVp-p 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 75mVp-p 75mVp-p 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 75mVp-p 75mVp-p Input Current No Load(2) Full Load(3) 70mA 1014mA 75mA 1200mA 80mA 1582mA 115mA 1698mA 75mA 2008mA 90mA 2037mA 35mA 2037mA 35mA 493mA 45mA 584mA 40mA 781mA 30mA 838mA 35mA 980mA 55mA 1006mA 40mA 1002mA 15mA 247mA 20mA 288mA 30mA 391mA 15mA 414mA 20mA 490mA 35mA 497mA 50mA 501mA Output Power Maximum Capacitive Load Efficiency 9W 10.8W 15W 16.5W 20W 20W 20W 9W 10.8W 15W 16.5W 20W 20W 20W 9W 10.8W 15W 16.5W 20W 20W 20W 65,000µF 65,000µF 33,000µF 13,000µF 6,800µF 2,200µF 755µF 65,000µF 65,000µF 33,000µF 13,000µF 6,800µF 2,200µF 755µF 65,000µF 65,000µF 33,000µF 13,000µF 6,800µF 2,200µF 755µF 78% 79% 83% 85% 87% 86% 86% 80% 81% 84% 86% 89% 87% 87% 80% 82% 84% 87% 89% 88% 87% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 8 MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E MODEL SELECTION TABLE Dual Output Model Number MD12D12-833 MD12D15-667 MD24D12-833 MD24D15-667 MD48D12-833 MD48D15-667 Input Voltage Range 12VDC (9~18) 24VDC (18-36VDC) 48VDC (36-75VDC Output Voltage ±12VDC ±15VDC ±12VDC ±15VDC ±12VDC ±15VDc Output Current Min Load Max Load 0mA ±833mA 0mA ±667mA 0mA ±833mA 0mA ±667mA 0mA ±833mA 0mA ±667mA Ripple & Noise(1) 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Input Current No Load(2) Full Load(3) 45mA 2032mA 50mA 2034mA 30mA 1004mA 30mA 993mA 20mA 496mA 20mA 496mA Output Power 20W 20W 20W 20W 20W 20W Maximum Capacitive Load(4) ±680µF ±450µF ±680µF ±450µF ±680µF ±450µF Efficiency 86% 86% 87% 88% 88% 88% SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 9 18 36 12 24 48 18 36 75 36 50 100 Unit INPUT SPECIFICATIONS Operating Input Voltage Range Input Surge Voltage (100ms max) Input Reflected Ripple Current Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Voltage Adjustability(Single Outputs) Cross Regulation (Dual Outputs) Output Power Output Current Minimum Load Maximum Capacitive Load Ripple & Noise (20MHz bandwidth) Transient Response Recovery Time Start-Up Time Temperature Coefficient REMOTE ON/OFF CONTROL(5) Positive Logic (Standard) Negative Logic (Option) Input Current of CTRL Pin Remote OFF Input Current PROTECTION Short Circuit Protection Over Load Protection Over Voltage Protection 12VDC nominal input models 24VDC nominal input models 48VDC nominal input models 12VDC nominal input models 24VDC nominal input models 48VDC nominal input models Nominal Input and Full Load 20 L-C Type Low Line to High Line at Full Load No Load to Full Load Asymmetrical load 25%/100% Full Load See Table +1.0 +0.2 +0.5 +10 +5 See Table See Table 0 -0.02 DC/DC ON DC/DC OFF DC/DC ON DC/DC OFF -0.5 % of lout rated Zener Diode Clamp 1.5V, 1.8V, 2.5V, and 3.3V Models 5V Models 12V Models 15V Models VDC mAp-p % % % % % % Measured with a 0.1µF/50V MLCC 25% load step change Power Up Constant Resistive Load Remote ON/OFF ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature With Derating Maximum Case Temperature Storage Temperature Range Relative Humidity Natural Convection without Heat-Sink Thermal Impedance(6) Natural Convection with Heat-Sink Thermal Shock Vibration MTBF MIL-HDBK-217, Full Load 1/9/2018 -1.0 -0.2 -0.5 -10 -5 VDC See Table See Table 250 10 10 +0.02 %/ºC Open or 3~12VDC Short or 0~1.2VDC Short or 0~1.2VDC Open or 3~12VDC +0.5 2.5 mA mA µs ms Continuous, Automatic Recovery 150 % 3.9 6.2 VDC 15 18 -40 +100 +100 +125 95 -55 5 12 10 MIL-STD-810F MIL-STD-810F 1,583,000 hours Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] ºC ºC ºC % RH ºC/Watt Page 2 of 8 MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS GENERAL SPECIFICATIONS Efficiency Switching Frequency Min Nominal Vin and Full Load Isolation Voltage 1 minute Isolation Resistance Isolation Capacitance PHYSICAL SPECIFICATIONS Weight 500VDC 450 1600 1600 1600 1 Input to Output Input to Case Output to Case Max Unit See Table 500 550 KHz VDC GΩ pF 1000 0.95oz (27g) 2in x 1in x 0.4in (50.8mm x 25.4mm x 10.2mm) Nickel-Coated Copper Non-Conductive Black Plastic Epoxy (UL94 V-0) Dimensions (L x W x H) Case Material Base Material Potting Material SAFETY & EMC CHARACTERISTICS UL60950-1 EN60950-1 IEC60950-1 Safety Approvals EMI(7) Typ Class A Class B EN55022 ESD EN61000-4-2 Radiated Immunity Fast Transient(8) Surge(8) Conducted Immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Air ±8KV Contact ±6KV 10 V/m ±2KV ±1KV 10 Vr.m.s 100A/m continuous; 1000A/m 1 second Perf. Criteria B Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria A NOTES (1) (2) (3) (4) (5) Typical Value at Nominal Input and Full Load. Typical Value at Nominal Input Voltage and No Load. Maximum Value at Nominal Input Voltage and Full Load. Test by minimum Vin and Constant Resistive Load. The ON/OFF control pin is referenced to –Vin. To order Negative logic Remote ON/OFF add the suffix “R” to the model number (Ex: MD48S5-4000R). (6) Heatsink is optional and P/N: 7G-0020C-F (7) The MD series can meet EN5022 Class A with an external capacitor in parallel with the input pins. Recommended: 12Vin Models: 4.7µF/50V 1812 MLCC 24Vin Models: 2.2µF/50V 1812 MLCC 48Vin Models: 2.2µF/100V 1812 MLCC (8) An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor suggested is Nippon chemi-con KY series, 220µF/100V, ESR 48mΩ. (9) CAUTION: The power module is not internally fused. An input line fuse must always be used. Due to advances in technology, specifications subject to change without notice. 1/9/2018 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 8 Rev E MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs DERATING CURVES MD48S5-4000 Derating Curve MD48S5-4000 Derating Curve with Heatsink EFFICIENCY GRAPHS MD48S5-4000 Efficiency vs. Input Voltage 1/9/2018 MD48S5-4000 Efficiency vs. Output Load Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 8 MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E MECHANICAL DRAWINGS PIN 1 2 3 4 5 6 PIN CONNECTION SINGLE +Vin -Vin +Vout Trim -Vout Ctrl DUAL +Vin -Vin +Vout Common -Vout Ctrl EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below 1. 2. 3. 4. All dimensions in inch (mm) Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) Pin pitch tolerance ±0.01 (0.25) Pin dimension tolerance ±0.004(0.1) REMOTE ON/OFF CONTROL The remote ON/OFF pin allows the user to turn the DC/DC power module on during a logic high and off during a logic low. Figure 2 gives several examples of acceptable configurations. The remote ON/OFF pin is an open collector/drain logic input signal (Von/off) that has –Vin as the reference voltage. If not using the remote on/off feature, open the circuit between the on/off pin and the –input pin to turn the module on. Remote ON/OFF Implementation Isolated-Closure Remote ON/OFF 1/9/2018 Level Control Using TTL Output Level Control Using Line Voltage Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 8 MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E OUTPUT VOLTAGE ADJUSTMENT Output voltage set point adjustment allows the user to increase or decrease the output voltage set point of a module. This is accomplished by connecting an external resistor between the TRIM pin and either the +Vout or -Vout pins. With an external resistor between the TRIM and -Vout pin, the output voltage set point increases. With an external resistor between the TRIM and +Vout pin, the output voltage set point decreases. MDxxS1.5-5500 MDxxS1.8-5500 Trim 1% 2% Trimup 1.515V 1.53V Rup 4.578 kΩ 2.065 kΩ Trimdown 1.485V 1.47V Rdown 5.704 kΩ 2.571 kΩ 3% 4% 5% 6% 7% 8% 1.545V 1.56V 1.575V 1.59V 1.605V 1.62V 1.227 kΩ 0.808 kΩ 0.557 kΩ 0.389 kΩ 0.27 kΩ 0.18 kΩ 1.455V 1.44V 1.425V 1.41V 1.395V 1.38V 1.527 kΩ 1.005 kΩ 0.692 kΩ 0.483 kΩ 0.334 kΩ 0.222 kΩ 9% 10% 1.635V 1.65V 0.11 kΩ 0.054 kΩ 1.365V 1.35V 0.135 kΩ 0.065 kΩ Trim Trimup Rup Trimdown Rdown 1% 1.818V 11.639 kΩ 1.782V 14.66 kΩ 2% 3% 4% 5% 6% 7% 1.836V 1.854V 1.872V 1.89V 1.908V 1.926V 5.205 kΩ 3.06 kΩ 1.988 kΩ 1.344 kΩ 0.915 kΩ 0.609 kΩ 1.764V 1.746V 1.728V 1.71V 1.692V 1.674V 6.57 kΩ 3.874 kΩ 2.525 kΩ 1.716 kΩ 1.177 kΩ 0.792 kΩ 8% 9% 10% 1.944V 1.962V 1.98V 0.379 kΩ 0.2 kΩ 0.057 kΩ 1.656V 1.638V 1.62V 0.503 kΩ 0.278 kΩ 0.098 kΩ MDxxS2.5-5500 1/9/2018 MDxxS3.3-5000 Trim Trimup Rup Trimdown Rdown Trim Trimup Rup Trimdown Rdown 1% 2% 3% 4% 5% 6% 2.525V 2.55V 2.575V 2.6V 2.625V 2.65V 37.076 kΩ 16.675 kΩ 9.874 kΩ 6.474 kΩ 4.434 kΩ 3.074 kΩ 2.475V 2.45V 2.425V 2.4V 2.375V 2.35V 49.641 kΩ 22.481 kΩ 13.428 kΩ 8.902 kΩ 6.186 kΩ 4.375 kΩ 1% 2% 3% 3.333V 3.366V 3.399V 57.930 kΩ 26.165 kΩ 15.577 kΩ 3.267V 3.234V 3.201V 69.470 kΩ 31.235 kΩ 18.490 kΩ 7% 8% 9% 10% 2.675V 2.7V 2.725V 2.75V 2.102 kΩ 1.374 kΩ 0.807 kΩ 0.354 kΩ 2.325V 2.3V 2.275V 2.25V 3.082 kΩ 2.112 kΩ 1.358 kΩ 0.754 kΩ 4% 5% 6% 7% 8% 9% 3.432V 3.465V 3.498V 3.531V 3.564V 3.597V 10.283 kΩ 7.106 kΩ 4.988 kΩ 3.476 kΩ 2.341 kΩ 1.459 kΩ 3.168V 3.135V 3.102V 3.069V 3.036V 3.003V 12.117 kΩ 8.294 kΩ 5.745 kΩ 3.924 kΩ 2.559 kΩ 1.497 kΩ 10% 3.630V 0.753 kΩ 2.970V 0.647 kΩ Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 8 MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E MDxxS5-4000 MDxxS12-1670 Trim Trimup Rup Trimdown Rdown Trim 1% 2% 3% 5.050V 5.100V 5.150V 36.570 kΩ 16.580 kΩ 9.917 kΩ 4.950V 4.900V 4.850V 45.533 kΩ 20.612 kΩ 12.306 kΩ 1% 2% 3% 12.120V 367.908 kΩ 11.880V 460.992 kΩ 12.240V 165.954 kΩ 11.760V 207.946 kΩ 12.360V 98.636 kΩ 11.640V 123.597 kΩ 4% 5% 6% 7% 8% 9% 5.200V 5.250V 5.300V 5.350V 5.400V 5.450V 6.585 kΩ 4.586 kΩ 3.253 kΩ 2.302 kΩ 1.588 kΩ 1.032 kΩ 4.800V 4.750V 4.700V 4.650V 4.600V 4.550V 8.152 kΩ 5.660 kΩ 3.999 kΩ 2.812 kΩ 1.922 kΩ 1.230 kΩ 4% 5% 6% 7% 8% 9% 12.480V 12.600V 12.720V 12.840V 12.960V 13.080V 64.977 kΩ 44.782 kΩ 31.318 kΩ 21.701 kΩ 14.488 kΩ 8.879 kΩ 11.520V 11.400V 11.280V 11.160V 11.040V 10.920V 81.423 kΩ 56.118 kΩ 39.249 kΩ 27.199 kΩ 18.162 kΩ 11.132 kΩ 10% 5.500V 0.588 kΩ 4.500V 0.676 kΩ 10% 13.200V 4.391 kΩ 10.800V 5.509 kΩ Trimup MDxxS15-1330 Trim Trimup Rup Trimdown Trimdown Rdown MDxxD12-833 Rdown 1% 2% 3% 4% 5% 6% 15.150V 404.184 kΩ 14.850V 499.816 kΩ 15.300V 180.592 kΩ 14.700V 223.408 kΩ 15.450V 106.061 kΩ 14.550V 131.272 kΩ 15.600V 68.796 kΩ 14.400V 85.204 kΩ 15.750V 46.437 kΩ 14.250V 57.563 kΩ 15.900V 31.531 kΩ 14.100V 39.136 kΩ 7% 8% 9% 10% 16.050V 16.200V 16.350V 16.500V 20.883 kΩ 12.898 kΩ 6.687 kΩ 1.718 kΩ Rup 13.950V 25.974 kΩ 13.800V 16.102 kΩ 13.650V 8.424 kΩ 13.500V 2.282 kΩ Trim Trimup Rup Trimdown Rdown 1% 2% 3% 4% 24.24V 24.48V 24.72V 24.96V 218.21 kΩ 98.105 kΩ 58.07 kΩ 38.052 kΩ 23.76V 23.52V 23.28V 23.04V 273.44 kΩ 123.02 kΩ 72.874 kΩ 47.803 kΩ 5% 6% 7% 8% 9% 10% 25.2V 25.44V 25.68V 25.92V 26.16V 26.4V 26.042 kΩ 18.035 kΩ 12.316 kΩ 8.026 kΩ 4.69 kΩ 2.021 kΩ 22.8V 22.56V 22.32V 22.08V 21.84V 21.6V 32.76 kΩ 22.732 kΩ 15.568 kΩ 10.196 kΩ 6.017 kΩ 2.675 kΩ MDxxD15-667 1/9/2018 Trim Trimup Rup Trimdown Rdown 1% 2% 3% 4% 5% 30.3V 30.6V 30.9V 31.2V 31.5V 268.29 kΩ 120.64 kΩ 71.429 kΩ 46.822 kΩ 32.058 kΩ 29.7V 29.4V 29.1V 28.8V 28.5V 337.71 kΩ 152.02 kΩ 90.126 kΩ 59.178 kΩ 40.609 kΩ 6% 7% 8% 9% 10% 31.8V 32.1V 32.4V 32.7V 33V 22.215 kΩ 15.184 kΩ 9.911 kΩ 5.81 kΩ 2.529 kΩ 28.2V 27.9V 27.6V 27.3V 27V 28.23 kΩ 19.387 kΩ 12.756 kΩ 7.598 kΩ 3.471 kΩ Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 7 of 8 MD SERIES Up to 20 Watts DC/DC Power Converters Single and Dual Outputs Rev E RECOMMENDED FILTERS Recommended Filter for EN55022 Class B Compliance Recommended EN55022 Class B Filter Circuit Layout The componenets used in the figure above are as follows: C1 C2 C3 C4 MD12xxx-xxxx 3.3µF/50V 1812 MLCC 3.3µF/50V 1812 MLCC 1000pF/2KV MLCC 1000pF/2KV MLCC MD24xxx-xxxx 4.7µF/50V 1812 MLCC N/A 1000pF/2KV MLCC 1000pF/2KV MLCC MD48xxx-xxxx 2.2µF/100V 1812 MLCC 2.2µF/100V 1812 MLCC 1000pF/2KV MLCC 1000pF/2KV MLCC L1 450µH Common Choke PMT-048 450µH Common Choke PMT-048 325µH Common Choke PMT-050 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 1/9/2018 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 8 of 8