CDE FCP0805H152J-J1 Stable stacked metallized film (pps) chips for reflow soldering Datasheet

Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
The Type FCP’s combination of high capacitance density and
excellent high frequency response makes it a great choice for
wireless and instrumentation applications.
Type FCP stacked metallized polyphenelene sulfide (PPS)
film capacitors offer high capacitance per unit volume, stable
capacitance and DF over a wide temperature range, and
excellent high frequency performance. Type FCP capacitors
conform to standard EIA 0603, 0805, 1206, 1210, 1913 & 2416
surface mount case sizes and are packaged on tape and reel.
Specifications
Highlights
-
Stacked metallized polyphenylene sulfide (PPS) film.
High operating temperature to +125 ºC
High capacitance per unit volume
Excellent high frequency performance
Typical ΔC from –55 ºC to 105 ºC ≤ ±1.5%
Stable cap and DF over wide temperature range
Capacitance Range
100 pF to 0.22 µF (1kHz at ≤5 Vrms)
Capacitance Tolerance
±5% (J) Standard, ±2% (G) Optional
Rated Voltage
16 Vdc and 50 Vdc
Dissipation Factor (Tan δ)
0.6% Max. (1 kHz at ≤5 Vrms)
Operating Temperature Range
–55 ºC to +125 ºC (See Voltage derating chart for 0.12 - 0.22 µF
above 105 ºC)
Dielectric Strength
150% of rated Vdc for 60 s
Insulation Resistance
3000 MΩ Min. at 20 ºC, after 60 s (16 Vdc rated, test 10 Vdc; 50 Vdc
rated, test 50 Vdc)
Construction
Stacked metallized polyphenylene sulfide (PPS) film. Terminations
are lead free with a Sn-Ag-Cu solder finish.
Life Test
Capacitors subjected to 1000 hours of maximum rated temperature and 125% of the rated voltage will not have any significant
visual damage, thecapacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%, and IR will be a
minimum of 1000 Megohms.
Resistance to Soldering Heat
Capacitors subjected to a maximum of 260 °C reflow soldering
process will not have any significant visual damage, the dielectric
strength will be as specified, the capacitance will be within ±3% of
the initial measured value, DF will be a maximum of .66%, and IR
will be a minimum of 1000 Megohms.
Moisture Resistance
Capacitors subjected to 1000 h at 40 °C and 90% to 95% RH and
rated voltage will not have any significant visual damage, will
withstand 1.3 times the rated voltage for one minute, the capacitance will be within ±2% of the initial measured value, DF will be a
maximum of 0.9%, and IR will be a minimum of 1000 Megohms.
RoHS Compliant
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
Ratings
Capacitance
16 Vdc
50 Vdc
Catalog
Case
Catalog
Case
Part Number
Code
Part Number
Code
(µF)
(nF)
(pF)
.00010
.10
100
FCP0603C101J-K1
FCP0805H101J-J1
.00012
.12
120
FCP0603C121J-K1
FCP0805H121J-J1
.00015
.15
150
FCP0603C151J-K1
FCP0805H151J-J1
.00018
.18
180
FCP0603C181J-K1
FCP0805H181J-J1
.00022
.22
220
FCP0603C221J-K1
FCP0805H221J-J1
.00027
.27
270
FCP0603C271J-K1
FCP0805H271J-J1
.00033
.33
330
FCP0603C331J-K1
FCP0805H331J-J1
.00039
.39
390
FCP0603C391J-K1
FCP0805H391J-J1
.00047
.47
470
FCP0603C471J-K1
.00056
.56
560
FCP0603C561J-K1
.00068
.68
680
FCP0603C681J-K1
FCP0805H681J-J1
0603
FCP0805H471J-J1
FCP0805H561J-J1
.00082
.82
820
FCP0603C821J-K1
FCP0805H821J-J1
.0010
1.00
1000
FCP0603C102J-K1
FCP0805H102J-J1
.0012
1.20
1200
FCP0603C122J-K1
FCP0805H122J-J1
.0015
1.50
1500
FCP0603C152J-K1
FCP0805H152J-J1
.0018
1.80
1800
FCP0603C182J-K1
FCP0805H182J-J1
.0022
2.20
2200
FCP0603C222J-K1
FCP0805H222J-J1
.0027
2.70
2700
FCP0603C272J-K1
FCP0805H272J-J1
.0033
3.30
3300
FCP0805C332J-J1
FCP1206H332J-H1
.0039
3.90
3900
FCP0805C392J-J1
FCP1206H392J-H1
.0047
4.70
4700
FCP0805C472J-J1
FCP1206H472J-H1
.0056
5.60
5600
FCP0805C562J-J1
.0068
6.80
6800
FCP0805C682J-J1
FCP1206H682J-H1
.0082
8.20
8200
FCP0805C822J-J2
FCP1206H822J-H2
805
FCP1206H562J-H1
.010
10
10000
FCP0805C103J-J2
FCP1206H103J-H2
.012
12
12000
FCP1206C123J-H1
FCP1210H123J-G1
.015
15
15000
FCP1206C153J-H1
FCP1210H153J-G1
.018
18
18000
FCP1206C183J-H1
FCP1210H183J-G2
.022
22
22000
FCP1206C223J-H1
FCP1210H223J-G2
1206
.027
27
27000
FCP1206C273J-H2
.033
33
33000
FCP1206C333J-H2
FCP1210H333J-G3
.039
39
39000
FCP1206C393J-H3
FCP1210H393J-G3
1206
1210
FCP1210H273J-G2
.047
47
47000
FCP1206C473J-H3
FCP1913H473J-E1
.056
56
56000
FCP1210C563J-G2
FCP1913H563J-E1
.068
68
68000
FCP1210C683J-G2
.082
82
82000
FCP1210C823J-G3
.100
100
100000
FCP1210C104J-G3
.12
120
120000
FCP2416H124J-D1
.15
150
150000
FCP2416H154J-D1
.18
180
180000
FCP2416H184J-D3
.22
220
220000
FCP2416H224J-D4
1210
0805
FCP1913H683J-E1
1913
FCP1913H823J-E2
FCP1913H104J-E2
2416
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
Typical Temperature Characteristics
Insulation Resistance
1000
1000Megohms
Typical Frequency Characteristics
100 to 1000 pF
100
0.01 µF
0.1 µF
10
0.22 µF
1
-60
-40
-20
0
20
40
60
80
100
120
140
Temperature (°C)
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
Outline Dimensions
Case
Code
Outline Dimensions (in.)
Case
Code
(metric) L ±0.2
Outline Dimensions (mm)
L ±0.008
W
T±0.008
t
W
T±0.2
t
0603
0.063
0.032±0.006
0.028±0.006
0.014±0.008
1608
1.6
0.80±0.15
0.70±0.15
0.35±0.2
0805
0.079
0.049±0.008
0.018±0.010
2012
2.0
1.25±0.2
0.035
0.043
0.035
1206
1210
1913
0.126
0.126
0.189
0.063±0.008
0.098±0.008
0.130±0.012
0.043
0.236
0.161±0.012
0.45±0.25
0.9
0.026±0.012
3216
3.2
1.6±0.2
1.1
K1
J1
J2
H1
0.65±0.3
H2
0.059
1.5
H3
0.043
1.1
G1
0.059
0.026±0.012
3225
3.2
2.5±0.2
1.5
0.083
2.1
0.059
1.5
0.083
0.031±0.012
4833
4.8
3.3±0.3
0.075
2416
0.9
1.1
Packaging
Code
0.098
2.1
0.65±0.3
G3
0.80±0.3
1.9
0.031±0.012
6041
6.0
4.1±0.3
0.110
2.5
2.8
G2
E1
E2
D1
0.80±0.3
D3
D4
10000
dv/dt (V/us)
1000
50V FCP
100
16V FCP
10
1
0.00010
0.00100
0.01000
0.10000
1.00000
Capacitance (uF)
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
FCP 0805 50 Vdc Rating Vrms and Arms vs. Frequency
0.15
100
100 pF to 2700 pF
2700 pF
2200 pF
Arms
Vrms
0.10
10
1800 pF
0.05
1200 pF
820 pF
560 pF
1
10
100
100 pF
0.00
1000
10
100
Frequency (kHz)
1000
Frequency (kHz)
FCP 1206 50 Vdc Rating Vrms and Arms vs. Frequency
0.50
100
0.40
Arms
Vrms
3300 pF to 0.010 uF
10
.01 uF
8200 pF
0.30
6800 pF
5600 pF
0.20
4700 pF
3300 pF
0.10
0.00
1
10
100
Frequency (kHz)
1000
10
100
1000
Frequency (kHz)
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
FCP 1210 50 Vdc Rating Vrms and Arms vs. Frequency
100
1.50
.039 uF
.033 uF
.027 uF
.022 uF
.018 uF
.015 uF
.012 uF
Arms
Vrms
1.00
.012 uF
.015 uF
.022 uF
.027 uF
.033 uF
.039 uF
0.50
10
0.00
10
100
1000
10
100
Frequency (kHz)
1000
Frequency (kHz)
FCP 1913 & 2416 50 Vdc Rating Vrms and Arms vs. Frequency
1.50
100
0.22 uF
0.18 uF
0.15 uF
0.12 uF
Vrms
0.10 uF
0.082 uF
1.00
Arms
0.068 uF
0.056 uF
0.047 uF
30Vrms
0.047 uF
0.056 uF
0.068 uF
0.082 uF
0.10 uF
0.12 uF
0.15 uF
0.18 uF
0.22 uF
10
10
Frequency (kHz)
0.50
0.00
10
100
Frequency (kHz)
100
Maximum AC Voltage FCP 16Vdc Series
Vrms
100
100pF - 0.1 µF
11 Vrms
10
1
10
100
Frequency (kHz)
1000
The capacitor surface temperature should not exceed 125 ºC.
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering
Typical Applications
In PLL circuit applications, FCP SMT film capacitor advantages are tight tolerance on the capacitance value, stable
capacitance with temperature, faster lock-up times, and no noise due to piezoelectric effects.
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.
Similar pages