UTC BTB16AL-8-CW-TA3-T 16a triac Datasheet

UNISONIC TECHNOLOGIES CO., LTD
BTB16A
Preliminary
TRIAC
16A TRIACS

DESCRIPTION
The UTC BTB16A is a 16A triacs which can be operated in 3
quadrants only, it uses UTC’s advanced technology to provide
customers with high commutation performances and voltage insulated
tab, etc.
The UTC BTB16A is suitable for inductive load switching
operations, also can be used in ON/OFF function applications such as
induction motor starting circuits, heating regulation, static relays etc.

SYMBOL

ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
BTB16AL-x-xx-TA3-T
BTB16AG-x-xx-TA3-T
BTB16AL-x-xx-TA3-T

TO-220
Packing
Tube
(1)Packing Type
(1) T: Tube
(2)Package Type
(2) TA3: TO-220
(3)Sensitivity and type
(3) refer to SENSITIVITY AND TYPE
(4)Voltage
(4) 6: 600V, 8: 800V
(5)Lead Free
(5) L: Lead Free, G: Halogen Free
SENSITIVITY AND TYPE
PART NUMBER
BW
CW
SW
◎: Available

Pin Assignment
1
2
3
MT1 MT2
G
Package
VOLTAGE
600V
◎
◎
◎
800V
◎
◎
◎
SENSITIVITY
TYPE
50mA
35mA
10mA
SNUBBERLESS
SNUBBERLESS
LOGIC LEVEL
MARKING INFORMATION
PACKAGE
MARKING
TO-220
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 4
QW-R401-058.a
BTB16A

Preliminary
TRIAC
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RMS On-State Current (Full Sine Wave) TC=86°C
Non Repetitive Surge Peak F=50 Hz t=20ms
On-State Current (Full
F=60 Hz t=16.7ms
Cycle, TJ initial=25°C)
2
SYMBOL
IT(RMS)
RATINGS
16
UNIT
A
160
A
168
A
ITSM
I t Value for Fusing
tP=10ms
It
144
A2 s
Critical Rate of Rise of
On-State Current IG=2xIGT, F=120 Hz TJ=125°C
dI/dt
50
A/µs
tr≤100ns
Non Repetitive Surge Peak
tP=10ms TJ=25°C
VDSM/VRSM
VDRM/VRRM+100
V
Off-State Voltage
Peak Gate Current
tP=20µs
TJ=125°C
IGM
4
A
Average Gate Power Dissipation
TJ=125°C
PG(AV)
1
W
Operating Junction Temperature
TJ
-40~+125
°C
Storage Junction Temperature
TSTG
-40~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

2
THERMAL RESISTANCES
PARAMETER
Junction to Ambient
Junction to Case (AC)

SYMBOL
θJA
θJC
RATINGS
60
1.2
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TJ =25°C unless otherwise specified.)
FOR SNUBBERLESS TYPE and LOGIC LEVEL TYPE (3 QUADRANTS)
SW
PARAMETER
SYMBOL TEST CONDITIONS
MIN TYP MAX
Gate Trigger Current
IGT
I-II-III
10
(Note 1)
VD=12V, RL=33Ω
Gate Trigger Voltage
VGT
I-II-III
1.3
VD=VDRM,
Gate Non-Trigger
VGD
RL=3.3kΩ,
I-II-III 0.2
Voltage
TJ=125°C
Holding Current
IH
IT=500mA
15
(Note 2)
I-III
25
Latching Current
IL
IG=1.2IGT
II
30
Critical Rate of Rise of
VD=67%VDRM, Gate
Off-State Voltage
dV/dt
40
Open, TJ=125°C
(Note 2)
(dV/dt)c=0.1V/µs,
8.5
TJ=125°C
Critical Rate of Rise of
(dI/dt)c (dV/dt)c=10V/µs,
Off-State Voltage at
3.0
TJ=125°C
Commutation(Note 2)
Without Snubber
TJ=125°C
Note: 1. Minimum IGT is guaranteed at 5% of IGT max.
2. For both polarities of MT2 referenced to MT1.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
CW
BW
UNIT
MIN TYP MAX MIN TYP MAX
35
50
mA
1.3
1.3
V
0.2
500
0.2
V
35
50
mA
50
60
70
80
mA
mA
1000
V/µs
A/ms
A/ms
8.5
14
A/ms
2 of 4
QW-R401-058.a
BTB16A

Preliminary
TRIAC
STATIC CHARACTERISTICS
PARAMETER
Peak On-State Voltage(Note 2)
Threshold Voltage(Note 2)
Dynamic Resistance(Note 2)
SYMBOL
TEST CONDITIONS
VTM
ITM=22.5A, tp=380μs
TJ=25°C
VTO
TJ=125°C
RD
TJ=125°C
IDRM
TJ=25°C
VDRM=VRRM
Repetitive Peak Off-State Current
IRRM
TJ=125°C
Note: 1. Minimum IGT is guaranteed at 5% of IGT max.
2. For both polarities of MT2 referenced to MT1.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP MAX UNIT
1.55
V
0.85
V
25
mΩ
5
μA
2
mA
3 of 4
QW-R401-058.a
BTB16A
Preliminary
TRIAC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R401-058.a
Similar pages