Fairchild NC7WZU04P6X Tinylogic uhs dual unbuffered inverter Datasheet

NC7WZU04
TinyLogic® UHS Dual Unbuffered Inverter
General Description
Features
The NC7WZU04 is a dual unbuffered inverter from
Fairchild’s Ultra High Speed Series of TinyLogic® in the
space saving SC70 6-lead package. The special purpose unbuffered circuit design is intended for crystal
oscillator or analog applications. The device is fabricated
with advanced CMOS technology to achieve ultra high
speed with high output drive while maintaining low static
power dissipation over a very broad VCC operating
range. The device is specified to operate over the 1.65V
to 5.5V VCC range. The inputs are high impedance when
VCC is 0V. Inputs tolerate voltages up to 7V independent
of VCC operating voltage.
■ Space saving SC70 6-lead package
■ Ultra small MicroPak™ leadless package
■ Unbuffered for crystal oscillator and analog
applications
■ Balanced output drive: ±8mA at 4.5V VCC
■ Broad VCC operating range: 1.65V to 5.5V
■ Low quiescent power: ICC < 1µA at 5V VCC, TA = 25°C
Ordering Information
Order
Number
Package
Number
Package Code
Top Mark
NC7WZU04P6X
MAA06A
ZU4
NC7WZU04L6X
MAC06A
B5
Package Description
Supplied As
6-Lead SC70, EIAJ SC88,
1.25mm Wide
3k Units on Tape and Reel
6-Lead MicroPak, 1.0mm Wide
5k Units on Tape and Reel
Logic Symbol
IEEE/IEC
A1
1
Y1
Y2
A2
TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation.
MicroPak™ is a trademark of Fairchild Semiconductor Corporation.
©2006 Fairchild Semiconductor Corporation
NC7WZU04 Rev. 1.0.3
1
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
March 2006
Pin Descriptions
Pin Assignment for SC70
A1 1
6
Y1
GND
2
5
VCC
A2
3
4
Y2
Pin Name
Description
A1, A2
Data Inputs
Y1, Y2
Outputs
Function Table
Y=A
(Top View)
Pin One Orientation Diagram
(Top View)
AAA
Input
Output
A
Y
L
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
Pin One
AAA represents Product Code Top Mark – see
ordering code
Note: Orientation of Top Mark determines Pin One
location. Read the top product code mark left to
right, Pin One is the lower left pin (see diagram).
Pad Assignments for MicroPak
A1
1
6
Y1
GND
2
5
VCC
A2
3
4
Y2
(Top Through View)
2
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Connection Diagrams
The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed.
The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics
tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will
define the conditions for actual device operation.
Symbol
Parameter
Rating
VCC
Supply Voltage
−0.5V to +7V
VIN
DC Input Voltage
−0.5V to +7V
VOUT
DC Output Voltage
−0.5V to +7V
IIK
DC Input Diode Current @ VIN ≤ –0.5V
−50mA
IOK
DC Output Diode Current @
VOUT < –0.5V
VOUT > 0.5V, VCC = GND
−50mA
+50mA
IOUT
DC Output Current
±50mA
ICC/IGND
DC VCC/GND Current
±100mA
TSTG
Storage Temperature
−65°C to +150°C
TJ
Junction Temperature under Bias
150°C
TL
Junction Lead Temperature (Soldering, 10 seconds)
260°C
PD
Power Dissipation @ +85°C
180mW
Recommended Operating Conditions(1)
Symbol
Parameter
Rating
VCC
Supply Voltage Operating
1.8V to 5.5V
VCC
Supply Voltage Data Retention
1.5V to 5.5V
VIN
Input Voltage
0V to 5.5V
VOUT
Output Voltage
0V to VCC
TA
Operating Temperature
θJA
Thermal Resistance
−40°C to +85°C
350°C/W
Note:
1. Unused inputs must be held HIGH or LOW. They may not float.
3
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Absolute Maximum Ratings
TA =
-40°C to +85°C
+25°C
Symbol
VIH
VIL
VOH
VCC (V)
Min
HIGH Level
Input Voltage
Parameter
1.8 to 2.7
0.85 VCC
0.85 VCC
3.0 to 5.5
0.8 VCC
0.8 VCC
LOW Level
Input Voltage
1.8 to 2.7
0.15 VCC
0.15 VCC
3.0 to 5.5
0.2 VCC
0.2 VCC
HIGH Level
Output Voltage
Conditions
VIN = VIL
VIN = GND
VOL
LOW Level
Output Voltage
VIN = VIH
VIN = VCC
IOH = -100µA
Typ
Max
Min
1.65
1.55
1.65
1.55
1.8
1.6
1.79
1.6
2.3
2.1
2.29
2.1
3.0
2.7
2.99
2.7
4.5
4.0
4.48
4.0
IOH = -2mA
1.65
1.29
1.52
1.29
IOH = -2mA
2.3
1.9
2.19
1.9
IOH = -4mA
3.0
2.4
2.82
2.4
IOH = -6mA
3.0
2.3
2.73
2.3
IOH = -8mA
4.5
3.8
4.24
3.8
IOL = 100µA
1.65
0.01
0.2
Max
V
V
V
V
0.2
1.8
0.01
0.2
0.2
2.3
0.01
0.2
0.2
3.0
0.01
0.3
0.3
4.5
0.01
0.5
0.5
IOL = 2mA
1.65
0.10
0.24
0.24
IOL = 2mA
2.3
0.12
0.3
0.3
IOL = 4mA
3.0
0.19
0.4
0.4
IOL = 6mA
3.0
0.29
0.55
0.55
4.5
0.29
IOL = 8mA
Units
V
V
0.55
0.55
IIN
Input Leakage
Current
VIN = 5.5V, GND
0 to 5.5
±0.1
±1.0
µA
ICC
Quiescent
Supply Current
VIN = 5.5V, GND
1.65 to 5.5
1.0
10
µA
VOUT = Open
VIN = Adjust for Peak
ICC Current
1.8
0.2
2.5
2
3.3
5
5.0
15
ICCPEAK Peak Supply
Current in
Analog
Operation
4
NC7WZU04 Rev. 1.0.3
mA
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
DC Electrical Characteristics
TA =
+25˚C
Symbol
Parameter
tPLH, tPHL Propagation Delay
Conditions
CIN
Input Capacitance
CPD
Power Dissipation
Capacitance
Min
Typ
Max
Min
Max
1.65
1.5
5.5
9.8
1.5
11.0
1.8
1.5
4.6
8.1
1.5
8.9
2.5 ± 0.2
1.2
3.3
5.7
1.2
6.3
3.3 ± 0.3
0.8
2.7
4.1
0.8
4.5
5.0 ± 0.5
0.5
2.2
3.3
0.5
3.6
3.3 ± 0.3
1.2
4.0
6.4
1.2
7.0
5.0 ± 0.5
0.8
3.4
5.6
0.8
6.2
CL = 15pF,
RL = 1MΩ
CL = 50pF,
RL = 500Ω,
–40°C to +85°C
VCC (V)
Note 2
Figure
Units Number
ns
Figure 1
Figure 3
ns
Figure 1
Figure 3
0
3
pF
3.3
3.5
pF
5.0
5.5
Figure 2
Note:
2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption
(ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by
the expression:
ICCD = (CPD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
VCC
Input
Output
CL*
RL
tf = 3ns
tr = 3ns
*CL includes load and stray capacitance.
Input PRR = 1.0MHz; tW = 500ns
VCC
90%
Input
Figure 1. AC Test Circuit
90%
50%
GND
10%
VCC
50%
tW
tPHL
tPLH
A
10%
VOH
Output
Input
50%
50%
VOL
Application Note: When operating the NC7WZU04’s
unbuffered output stage in its linear range, as in oscillator
applications, care must be taken to observe maximum power
rating for the device and package. The high drive nature of
the design of the output stage will result in substantial simultaneous
conduction currents when the stage is in the linear region. See
the ICCPEAK specification on page 2.
Figure 3. AC Waveforms
Input = AC Waveform; tr, tf = 1.8ns;
PRR = 10MHz; Duty Cycle = 50%
Figure 2. ICCD Test Circuit
5
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
AC Electrical Characteristics
Tape Format for SC70
Package
Designator
Tape
Section
Number
Cavities
Cavity
Status
Cover Tape
Status
P6X
Leader (Start End)
125 (typ)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
Tape Dimension inches (millimeters)
Package
Tape Size
Dim A
Dim B
SC70-6
8mm
0.093
(2.35)
0.096
(2.45)
Dim F
0.138 ± 0.004 0.053 ± 0.004
(3.5 ± 0.10)
(1.35 ± 0.10)
6
NC7WZU04 Rev. 1.0.3
Dim KO
Dim P1
Dim W
0.157
(4)
0.315 ± 0.004
(8 ± 0.1)
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Tape and Reel Specification
Tape Format for MicroPak
Package
Designator
Tape
Section
Number
Cavities
Cavity
Status
Cover Tape
Status
L6X
Leader (Start End)
125 (typ)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
Tape Dimension inches (millimeters)
7
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Tape and Reel Specification (Continued)
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Tape and Reel Specification (Continued)
Reel Dimension for MicroPak inches (millimeters)
Tape Size
A
B
C
D
N
W1
W2
W3
8 mm
7.0
(177.8)
0.059
(1.50)
0.512
(13.00)
0.795
(20.20)
2.165
(55.00)
0.331 + 0.059/−0.000
(8.40 + 1.50/−0.00)
0.567
(14.40)
W1 + 0.078/−0.039
(W1 + 2.00/−1.00)
8
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
9
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead MicroPak, 1.0mm Wide
Package Number MAC06A
10
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FAST®
ActiveArray™
FASTr™
Bottomless™
FPS™
Build it Now™
FRFET™
CoolFET™
GlobalOptoisolator™
CROSSVOLT™ GTO™
DOME™
HiSeC™
EcoSPARK™
I2C™
2
E CMOS™
i-Lo™
EnSigna™
ImpliedDisconnect™
FACT™
IntelliMAX™
FACT Quiet Series™
Across the board. Around the world.™
The Power Franchise®
Programmable Active Droop™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC™
UltraFET®
UniFET™
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I18
11
NC7WZU04 Rev. 1.0.3
www.fairchildsemi.com
NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter
TRADEMARKS
Similar pages