LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Overvoltage resistant design, 105℃ LXH Series LXH ・Doesn't spark with DC over voltage ・Same case sizes of KMH ・Endurance with ripple current : 5,000 hours at 105℃ ・Non solvent resistant type ・RoHS Compliant Downsized Longer life KLG Downsized CHA P255 ◆SPECIFICATIONS Items Characteristics Category Temperature Range -25 to +105℃ Rated Voltage Capacitance Tolerance Leakage Current 200 & 400Vdc ±20% (M) I=0.02CV or 3mA, whichever is smaller. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Dissipation Factor (tanδ) 0.15 max. Low Temperature Characteristics Z(-25℃) /Z(+20℃)≦4 (at 20℃, 120Hz) (at 20℃ after 5 minutes) (at 20℃, 120Hz) (at 120Hz) (at 20℃, 1MHz) 50nH max. When an excessive DC voltage is applied to the capacitors under the test conditions on next page, the vent shall operate and then the capacitors shall become open-circuit without burning materials. The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed . the rated voltage) for 5,000 or 3,000 hours at 105℃ Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±15% of the initial value D.F. (tanδ) ≦150% of the initial specified value Leakage current ≦The initial specified value ESL DC Overvoltage Test Endurance Shelf Life ◆DIMENSIONS [mm] ●Terminal Code : VS (φ22 to φ35) Negative mark PC board pin-out 10 φD+1max. Sleeve (PET : Brown) * 4.0±0.5 L±2 Vent 2-φ2 *φD=35mm : 3.5±0.5mm The standard design has no plastic disc. ◆PART NUMBERING SYSTEM 1 2 3 4 E LXH 5 6 7 8 9 10 VS N 11 12 13 14 M 15 16 17 18 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 68µF:680, 1,500µF:152) Dummy terminal code Terminal code Voltage code (ex. 200V:201, 400V:401) Series code Category Please refer to "Product code guide (snap-in type)" ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Multipliers Frequency (Hz) 200Vdc 400Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 257 CAT. No. E1001N LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Overvoltage resistant design, 105℃ LXHSeries ◆STANDARD RATINGS WV (Vdc) 200 400 Cap (µF) Case size φD×L(mm) 270 330 330 390 390 470 470 470 560 560 560 680 680 680 680 820 820 820 1,000 1,000 1,200 1,200 1,500 68 68 82 82 100 100 120 120 120 150 150 150 180 180 180 180 220 220 220 270 270 270 330 330 390 390 470 22× 25 22× 30 25.4× 25 22× 35 25.4× 30 22× 40 25.4× 30 30× 25 22× 45 25.4× 35 30× 30 22× 50 25.4× 40 30× 30 35× 25 25.4× 50 30× 35 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 22× 25 25.4× 20 22× 30 25.4× 25 22× 35 25.4× 30 22× 40 25.4× 30 30× 25 22× 45 25.4× 35 30× 30 22× 50 25.4× 40 30× 30 35× 25 25.4× 45 30× 35 35× 30 25.4× 50 30× 40 35× 30 30× 45 35× 35 30× 50 35× 40 35× 45 Rated ripple current (Arms/105℃,120Hz) tanδ 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Part No. 5,000 hours 3,000 hours 0.45 0.62 0.62 0.67 0.66 0.72 0.72 0.77 0.80 0.78 0.81 0.89 0.89 0.89 0.88 1.05 1.03 1.05 1.18 1.18 1.33 1.36 1.57 0.26 0.24 0.30 0.30 0.34 0.34 0.37 0.37 0.39 0.42 0.43 0.43 0.49 0.48 0.47 0.48 0.55 0.54 0.55 0.62 0.62 0.59 0.71 0.69 0.80 0.79 0.89 0.87 1.20 1.21 1.31 1.28 1.40 1.41 1.50 1.56 1.53 1.57 1.74 1.74 1.74 1.72 2.04 2.00 2.04 2.30 2.30 2.60 2.65 3.08 0.51 0.46 0.58 0.58 0.66 0.66 0.72 0.72 0.76 0.82 0.84 0.84 0.95 0.94 0.92 0.94 1.07 1.06 1.08 1.21 1.21 1.15 1.39 1.35 1.55 1.54 1.74 ELXH201VSN271MP25S ELXH201VSN331MP30S ELXH201VSN331MQ25S ELXH201VSN391MP35S ELXH201VSN391MQ30S ELXH201VSN471MP40S ELXH201VSN471MQ30S ELXH201VSN471MR25S ELXH201VSN561MP45S ELXH201VSN561MQ35S ELXH201VSN561MR30S ELXH201VSN681MP50S ELXH201VSN681MQ40S ELXH201VSN681MR30S ELXH201VSN681MA25S ELXH201VSN821MQ50S ELXH201VSN821MR35S ELXH201VSN821MA30S ELXH201VSN102MR45S ELXH201VSN102MA35S ELXH201VSN122MR50S ELXH201VSN122MA40S ELXH201VSN152MA45S ELXH401VSN680MP25S ELXH401VSN680MQ20S ELXH401VSN820MP30S ELXH401VSN820MQ25S ELXH401VSN101MP35S ELXH401VSN101MQ30S ELXH401VSN121MP40S ELXH401VSN121MQ30S ELXH401VSN121MR25S ELXH401VSN151MP45S ELXH401VSN151MQ35S ELXH401VSN151MR30S ELXH401VSN181MP50S ELXH401VSN181MQ40S ELXH401VSN181MR30S ELXH401VSN181MA25S ELXH401VSN221MQ45S ELXH401VSN221MR35S ELXH401VSN221MA30S ELXH401VSN271MQ50S ELXH401VSN271MR40S ELXH401VSN271MA30S ELXH401VSN331MR45S ELXH401VSN331MA35S ELXH401VSN391MR50S ELXH401VSN391MA40S ELXH401VSN471MA45S ◆DC OVERVOLTAGE TEST CONDITIONS The vent will operate and the capacitor shall become an open circuit without burning materials when the following test DC voltage is applied. ● Test DC voltage Rated Voltage 200Vdc 400Vdc Capacitance <330µF 330≦C<470µF ≧470µF <100µF 100≦C<220µF ≧220µF ● Test Current limit Test DC voltage 4A 5A 300/375Vdc 7A 2A 4A 500/600Vdc 7A AC input Circuit SW + CX - Constant DC voltage/current power supply Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 258 CAT. No. E1001N