FE1.5M SINTERED GLASS JUNCTION ULTRAFAST AVALANCHE RECTIFIER VOLTAGE： ：1000V CURRENT: 1.5A FEATURE SOD-57 Glass passivated Hermetically sealed package Low reverse current Soft recovery characteristics MECHANICAL DATA Case: SOD-57 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL FE1.5M units Maximum Recurrent Peak Reverse Voltage VRRM 1000 V Maximum RMS Voltage VRMS 700 V Maximum DC blocking Voltage VDC 1000 V IFAV 1.5 A IFSM 50 A VF 1.8 V Ta =25°C Ta =100°C IR 5.0 100 µA Maximum Reverse Recovery Time (Note 1) Trr 53 nS Typical Junction Capacitance (Note 2) Cj 30.0 pF Typical Thermal Resistance (Note 3) Rth(ja) 45.0 ℃/W Tstg, Tj -65 to +175 ℃ Maximum Average Forward Rectified Current 3/8”lead length at TL=55℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25℃ Maximum DC Reverse Current at rated DC blocking voltage Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FE1.5M Rev.A2 www.gulfsemi.com