BUTTON AUTOMOTIVE RECTIFIER ARL3505 THRU ARL356 ARSL3505 THRU ARSL356 50 to 600 Volts CURRENT 35.0 Amperes AR-L FEATURES • • • • VOLTAGE RANGE ARS-L 0.346(8.8)DIA 0.327(8.2)TYP 0.409(10.4)DIA 0.382(9.7)TYP Low Leakage Low forward voltage drop High current capability High forward surge current capacity 0.051(1.3)DIA 0.047(1.2)TYP 0.051(1.3)DIA 0.047(1.2)TYP 1.0(25.4) MIN 1.0(25.4) MIN MECHANICAL DATA • • • • • • • 0.252(6.4) 0.236(6.0) 0.252(6.4) 0.236(6.0) Technology: Cell with vacuum soldered Case: transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated lead , solderable per MIL-STD-202E method 208C Polarity: Color ring denotes cathode end Mounting Position: any Weight: 0.083 ounces, 2.32 grams 1.0(25.4) MIN 1.0(25.4) MIN Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS ARL3505 ARL351 ARL352 ARL354 ARL356 ARSL3505 ARSL351 ARSL352 ARSL354 ARSL356 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 Volts Maximum Average Forward Rectified Current, IO 35.0 Amps IFSM 500 Amps Rating for fusing (t＜8.3ms) I2t 1038 A2S Maximum instantaneous Forward Voltage at 80A VF 1.08 Volts At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range 5.0 IR RθJC 1.0 ℃/W TJ,TSTG (-65 to +175) ℃ Polarity and voltage demotion color band Red Yellow Notes: 1. UA 250 Enough heatsink must be considered in application. E-mail: [email protected] Web Site: www.cnmic.com Silver Green Green BUTTON AUTOMOTIVE RECTIFIER ARL3505 THRU ARL356 ARSL3505 THRU ARSL356 CURRENT 35.0 Amperes F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) 50 to 600 Volts ARL3505 THRU ARL356 ARSL3505 THRU ARSL356 RATINGS AND CHARACTERISTIC CURVES 40 35 30 Single Phase Half Wave 60Hz 20 VOLTAGE RANGE Resistive or Inductive Load 8.3ms Single Half Sine-Wave 500 (JEDEC Method) Tj=Tj max 400 300 200 100 1 Cycle 0.375″(9.5mm) Lead Length 0 1 0 0 25 50 75 110 100 125 150 175 2 4 6 8 10 20 40 60 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 60 40 SQUARE WAVE 20 0 0 10 0.8 1.0 1.2 1.4 1.6 30 40 AVERAGE FORWARD CURRENT, (A) 1.0 0.1 0.6 20 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: [email protected] Web Site: www.cnmic.com 50