BT05VG2 1500-4000 MHz Wideband Drive Amplifier Device Features • • • • • • OIP3 = 40.5 dBm @ 1900 MHz Gain = 19.0 dB @ 1900 MHz Output P1 dB = 22.7 dBm @ 1900 MHz 50 Ω Cascadable Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant SOT-89 SMT package Product Description Typical Performance1 BeRex’s BT05VG2 is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Parameter Applications Vcc Bypass RF Choke RF In RF Out BT05VG2 DC Block DC Block Unit 1900 2100 2450 3500 MHz Gain 19.0 18.0 16.5 13.7 dB S11 -18.5 -15.6 -26.1 -22.0 dB -14.9 -19.1 -19.4 -20.0 dB 40.5 22.7 3.9 38.0 22.0 4.0 38.0 23.2 4.2 39.0 23.5 4.4 dBm dBm dB S22 2 OIP3 P1dB Noise Figure 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 11 dBm per tone separated by 1 MHz. Min. Bandwidth IC @ (Vc = 5V) VC RTH • Base station Infrastructure/RFID • Commercial/Industrial/Military wireless system Application Circuits Frequency Typical 1500 75 85 5.0 50 Max. Unit 4000 95 MHz mA V °C/W Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 Unit °C °C °C +6.0 180 23 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 5 to 11. BeRex ●website: www.berex.com ●email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=90mA, T=25°C) BeRex ●website: www.berex.com ●email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier S-Parameter (Vdevice = 5.0V, Icc = 88mA, T = 25 °C, calibrated to device leads) Freq [MHz] S11 [Mag] S11 [Ang] S21 [Mag] S21 [Ang] S12 [Mag] S12 [Ang] S22 [Mag] S22 [Ang] 100 500 1000 1500 2000 2500 3000 3500 0.270 0.484 0.603 0.649 0.727 0.812 0.860 0.845 -166.495 -165.550 169.297 142.996 119.846 103.333 91.901 82.120 17.095 13.796 9.839 7.265 5.645 4.578 3.760 3.142 169.234 134.745 107.471 89.329 75.285 65.518 57.542 48.480 0.034 0.039 0.045 0.046 0.047 0.046 0.050 0.046 2.969 9.708 8.523 6.978 7.094 7.622 4.871 4.636 0.112 0.209 0.243 0.224 0.232 0.276 0.326 0.365 -36.553 -115.545 -138.751 -166.419 159.675 133.104 118.486 112.242 4000 0.768 68.638 2.817 40.568 0.054 0.845 0.369 110.182 WCDMA 6FA 2140 -55dBc BeRex ●website: www.berex.com ●email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier WCDMA 6FA 2140 -60dBc ACLR BeRex ●website: www.berex.com ●email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 1900 MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin L2 C4 C5 RFout BT05VG2 C6 C7 C1 C2 C3 C4 C5 C6 C7 L1 L2 Tolerance 100pF 1000pF 10uF 56pF 56pF 2.7pF 1.8pF 39nH 1.5nH ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ± 5% ±5% ±5% Note: 1. PCB: 31mil thick FR4. 10uF 2. Distance between the center of the shunt cap(C6) and the input pin of BT05VG2 _ 0.8mm. 1000 pF 100pF 100 pF BT05VG2 BT013 39nH B 56pF 56pF B 2.7pF 1.5nH 1.8pF 3. Distance between the center of the series inductor(L2) and the output pin of BT05VG2 _ 3.5mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT05VG2 _ 9.0mm. Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ●website: www.berex.com ●email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 2100 MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin L2 C4 C5 RFout BT05VG2 C6 C7 C1 C2 C3 C4 C5 C6 C7 L1 L2 Tolerance 100pF 1000pF 10uF 56pF 56pF 2.2pF 1.5pF 47nH 1nH ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ± 5% ±5% ±5% Note: 1. PCB: 31mil thick FR4. 10uF 2. Distance between the center of the shunt cap(C6) and the input pin of BT05VG2 _ 0.7mm. 1000 pF 100pF 100 pF BT05VG2 BT013 47nH B 56pF 56pF B 2.2pF 1nH 1.5pF 3. Distance between the center of the series inductor (L2) and the output pin of BT05VG2 _ 3.5mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT05VG2 _ 9.5mm. Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ●website: www.berex.com ●email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 2450MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 L2 L3 C5 RFout BT05VG2 C6 C7 C1 C2 C3 C4 C5 C6 C7 L1 L2 L3 Tolerance 100pF 1000pF 10uF 100pF 1pF 1.5pF 0.5pF 39nH 2.7nH 1nH ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ± 5% ±5% ±5% ±5% Note: 1. PCB: 31mil thick FR4. 2. Distance between the center of the series inductor (L2) and the input pin of BT05VG2 _ 2.5mm. 10uF 1000 pF 100pF 100 pF BT05VG2 BT013 2.7nH 39nH B 100pF 1pF B 1.5pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT05VG2 _ 0.5mm. 1nH 0.5pF 4. Distance between the center of the series inductor (L3) and the output pin of BT05VG2 _ 3.5mm. 5. Distance between the center of the shunt cap(C7) and the output pin of BT05VG2 _ 5.5mm. Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ●website: www.berex.com ●email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier Application Circuit: 3500MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C6 C5 RFout BT05VG2 C8 C7 C1 C2 C3 C4 C5 C6 C7 C8 L1 100pF 1000pF 10uF 22pF 22pF 0.5pF 0.75pF 0.5pF 33nH Tolerance ± 5% ± 5% ± 20% ± 5% ± 5% ± 5% ±5% ±5% ±5% Note: 1. PCB: 31mil thick FR4. 10uF 2. Distance between the center of the series cap(C6) and the input pin of BT05VG2 _ 2.5mm. 1000 pF 100pF 100 pF 0.5pF BT05VG2 BT013 33nH B 22pF 22pF B 0.75pF 0.5pF 3. Distance between the center of the shunt cap(C7) and the input pin of BT05VG2 _ 7.1mm. 4. Distance between the center of the shunt cap(C8) and the output pin of BT05VG2 _ 7.7mm. Typical Performance BeRex ●website: www.berex.com ●email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier BeRex ●website: www.berex.com ●email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 PCB Mounting 0.40 Ø0.40 0.40 0.75 1.20 2.15 1.20 0.50 0.45 1.20 1.20 2.80 1.50 1.00 0.65 0.35 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ●email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F BT05VG2 1500-4000 MHz Wideband Drive Amplifier Package Marking Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 YY = Year, WW = Working Week, XX = Wafer No. Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 1B Value: Passes <1000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ●email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2018 BeRex Rev. F