Delta OPT-1250A2Q2CH Rohs compliant 1x9 sc duplex receptacle transceiver module for gigabit ethernet Datasheet

OPT-1250xxxx Series
RoHS Compliant 1X9 SC Duplex Receptacle Transceiver Module for
Gigabit Ethernet
Features
Industry Standard 1 x 9 Footprint and duplex SC
Connector interface
Compliant with Specifications for IEEE 802.3z Gigabit
Ethernet
OPT-1250Bxxx compliant with the 1.0625GBd Fibre
Channel 100-SM-LC-L FC-PI Rev.13
OPT-1250Axxx compliant with the 1.0625GBd Fibre
Channel FC-PI 100-M5-SN-I Rev.13
Single +3.3V or 5V Power Supply
PECL or TTL Receiver Signal Detect Indicator
Wave Solderable and Aqueous Washable
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Description
Applications
The OPT-1250xxxx series from DELTA is a 1X9
transceiver module designed expressly for high-speed
communication applications that require rates of up to
1.25Gbit/sec. It is compliant with the Gigabit Ethernet
standards as well as 1x Fiber channel standards.
Gigabit Ethernet/Fast Ethernet
Switched backplane applications
Performance
The OPT-1250xxxx transceivers are provided with the
SC receptacle that is compatible with the industry
standard SC connector.
OPT-1250AxFxx:
850nm VCSEL, up to 500m in 50/125μm MMF
The post-amplifier of the OPT-1250xxxx also includes
a Signal Detect circuit that provides a PECL or TTL
logic-Low output when an unusable optical signal
level is detected. (see order information)
850nm VCSEL, up to 220m in 62.5/125μm MMF
OPT-1250B2I1x:
1310nm FP laser, Data Link up to 5km in 9/125um
SMF
The OPT-1250xxxx transceiver is a Class 1 eye
safety product. The optical power levels, under normal
operation, are at eye safe level.
OPT-1250BxQxx:
1310nm FP laser, Data Link up to 10km in 9/125um
SMF
1310nm FP laser, up to 550m in 50/125μm MMF
1310nm FP laser, up to 550m in 62.5/125μm MMF
1
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Absolute Maximum Ratings
Parameter
Storage Temperature
Lead Soldering Temperature
Lead Soldering Time
Supply Voltage
Symbol
Ts
TSOLD
tSOLD
VCC
Min.
-40
Typ.
Max.
85
260
10
6
Unit
ºC
ºC
sec.
V
Note
Typ.
Max.
70
Unit
ºC
Note
1
5.25
3.465
V
0
Recommended Operating Conditions
Parameter
Ambient Operating Temperature
Supply Voltage
OPT-1250x1xx
OPT-1250x2xx, OPT-1250x4xx
Symbol
TA
Min.
0
VCC
4.75
3.135
Note: See ordering information for detail
Electrical Characteristics
(At recommended ambient operating temperature, TA and supply voltage, VCC)
Parameter
Total Supply Current
Transmitter
Transmitter Data Input Voltage-Low
Transmitter Data Input Voltage-High
Transmitter Differential Input Voltage
Receiver
Data Output Voltage-Low
Data Output Voltage-High
Receiver Differential Output Voltage
Output Data Rise/Fall Time
PECL SD Output
LOW level output voltage
HIGH level output voltage
TTL SD Output
LOW level output voltage
HIGH level output voltage
Symbol
ICCT
Min.
VIL-VCC
VIH-VCC
VDT
Typ.
Max.
300
Unit
mA
Note
-1.810
-1.165
0.3
-1.475
-0.880
1.6
V
V
V
1
1
2
VOL-VCC
VOH-VCC
VDR
tr/tf
-1.95
-1.045
0.5
-1.62
-0.74
1.2
0.4
V
V
V
ns
1
1
2
3
VSDH-VCC
VSDL-VCC
-1.84
-1.1
-1.60
-0.9
V
4
VSDH
VSDL
2
0
VCC
0.8
V
5
0.7
Notes:
1. For OPT-1250A1F1x, OPT-1250A4F1x, OPT-1250B2I1x, OPT-1250B2Q1x and
OPT-1250B1Q1x.
2. For OPT-1250A2F2x and OPT-1250B4Q2x.
3. These are 20%~80% values
4. For OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250B2I1x, OPT-1250B1Q1x and OPT-1250B2Q1x
5. For OPT-1250A4F1x and OPT-1250B4Q2x
2
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Single Mode Transceiver (OPT-1250B2I1x, OPT-1250B1Q1x, OPT-1250B2Q1x,
OPT-1250B4Q2x)
(At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec,
PRBS=27-1 NRZ, 9/125um SMF)
Parameter
Symbol
Min.
PO
-12
-9.5
9
1270
Typ.
Max.
Unit
-3
-3
dBm
Note
Transmitter
Output Optical Power (Avg.)
OPT-1250BxIx
OPT-1250BxQx
Optical Extinction Ratio
Center Wavelength
Spectral Width (RMS)
Optical Rise/Fall time
Relative Intensity Noise
Output Eye
ER
dB
λC
1310
1355
nm
σ
2.8
nm
0.26
ns
1
tr/tf
RIN
-120
dB/Hz
Complies with the IEEE 802.3z/D2 specification, and is class 1
laser eye safety
Receiver
Sensitivity (Avg.)
Input Optical Wavelength
Signal Detect-Asserted (Avg.)
Signal Detect-De-asserted (Avg.)
Signal Detect-Hysteresis
Receiver saturation power
PIN
λ
PA
PD
PA-PD
PSAT
-19
1310
-19
-35
0.5
-3
dBm
nm
dBm
dBm
dB
dBm
2
Notes:
6. These are 20%~80% values
7. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of
1250Mb/s, 27-1 PRBS.
Mask of the eye diagram for the optical transmit signal
3
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Multi-Mode Series Transceiver (OPT-1250A1F1x, OPT-1250A2F2x, OPT-1250A4F1x)
(At recommended ambient operating temperature, TA and supply voltage, VCC; Data Rate=1.25Gb/sec,
PRBS=27-1 NRZ, 62.5/125um MMF)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Note
Transmitter
Output Optical Power (Avg.)
Optical Extinction Ratio
Center Wavelength
Spectral Width (RMS)
Optical Rise/Fall time
Relative Intensity Noise
Output Eye
PO
-9.5
-4
dBm
ER
9
dB
λC
830
850
860
nm
σ
0.85
nm
0.26
ns
1
tr/tf
RIN
-117
dB/Hz
Complies with the IEEE 802.3z/D2 specification, and is class 1
laser eye safety
Receiver
Sensitivity (Avg.)
Input Optical Wavelength
Signal Detect-Asserted (Avg.)
Signal Detect-De-asserted (Avg.)
Signal Detect-Hysteresis
Receiver saturation power
PIN
λ
PA
PD
PA-PD
PSAT
-17
850
-17
-30
0.5
-4
dBm
nm
dBm
dBm
dB
dBm
2
Notes:
8. These are 20%~80% values
9. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of
1250Mb/s, 27-1 PRBS.
Mask of the eye diagram for the optical transmit signal
4
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Pin Out Table
PIN
1
2
3
4
5
6
7
8
9
Symbol
GND
RD (+)
RD (-)
SD
VccR
VccT
TD (-)
TD (+)
GND
Functional description
Receiver Signal Ground
Receiver Data Out (LVPECL)
Receiver Data Out Bar (LVPECL)
Receiver Signal Detect (LVPECL or TTL)
Receiver Power Supply,
Transmitter Power Supply
Transmitter Data In Bar (LVPECL)
Transmitter Data In (LVPECL)
Transmitter Signal Ground
Pin Descriptions:
Pin 1 Receiver Signal Ground, GND
Directly connect these pins to the ground plane.
Pin 2 Receiver Data Out (LVPECL), RD (+)
Receiver Data output (LVPECL), RD (+).
Pin 3 Receiver Data Out Bar (LVPECL), RD (-)
Receiver Data output (LVPECL), RD (-).
Pin 4 Receiver Signal Detect (LVPECL/TTL), SD
PECL/TTL logic family. Normal Operation: Logic “1” Output
Fault Condition: Logic”0” Output.
Pin 5 Receiver Power Supply, VccR
Provide +3.3/5V dc power supply.
Pin 6 Transmitter Power Supply, VccT
Provide +3.3/5V dc power supply.
Pin 7 Transmitter Data In Bar (LVPECL), TD (-)
Transmitter Data Input (LVPECL), TD (-)
Pin 8 Transmitter Data In (LVPECL), TD (+)
Transmitter Data Input (LVPECL), TD (+)
Pin 9 Transmitter Signal Ground, GND
Directly connect these pins to the ground plane.
5
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Recommend Circuit Schematic for Internal DC Coupled Transceivers
TX-VCC
9
R1
TD+
TD-
8
7
6
5
4
3
2
1
R3
C1
TX-GND
RX-GND
C3
C2
C4
RDSD
TX-VCC
RX-VCC
R2
RD+
R4
R5
R6
R7
Transceiver Top Niew
Test Equipment
L1
R1=R3=82 Ohm (3.3V), 68 Ohm (5V)
TX-VCC
R2=R4=130 Ohm (3.3V), 191 Ohm (5V)
VCC
C5
C6
C7
C8
C9
R5=270 Ohm (3.3V, PECL), 510 Ohm (5V, PECL)
L2
NC (TTL)
RX-VCC
R6=R7=274 Ohm (5V)
C1=C2=C3=C4=C6=C8=100 nF
C5=100 uF
C7=C9=10 uF
L1=L2=1 uH or ferrite inductor
Recommend Circuit Schematic for Internal AC Coupled Transceivers
9
TD+
TD-
8
7
6
5
4
3
2
1
C1
C3
C4
C2
TX-VCC
RD+
RDSD
RX-VCC
R1
Transceiver Top View
Test Equipment
R1=270 Ohm(3.3V, PECL), 510 Ohm (5V, PECL)
NC(TTL)
C1=C2=C3=C4=C6=C8=100 nF
L1
TX-VCC
VCC
C5
C6
C7
C8
C9
C5=100 uF
L2
C7=C9=10 uF
RX-VCC
L1=L2=1 uH or ferrite inductor
6
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Package Outline Drawing (without shielding)
Package Outline Drawing (A type shielding)
7
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Package Outline Drawing (B type shielding)
Package Outline Drawing (C type shielding)
8
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Regulatory Compliance
Feature
Electromagnetic Interference
(EMI)
Reference
Performance
FCC Class B
EN 55022 Class B (CISPR 22A)
Radio Frequency
Electromagnetic Field
EN 61000-4-3
(1) Satisfied with electrical
characteristics of product
spec.
IEC 1000-4-3
Electrostatic Discharge to the
Duplex LC Receptacle
EN 61000-4-2
(2) No physical damage
IEC 1000-4-2
IEC 801.2
Electrostatic Discharge to the
Electrical Pins
MIL-STD-883E Method 3015.7
Eye Safety
US FDA CDRH AEL Class 1
CDRH File # 0321539-00
EN 60950: 2000
EN 60825-1: 1994+A11+A2
EN 60825-2: 2000
TUV Certificate No. R50032471
Component Recognition
Underwriters Laboratories and
UL File # E239394
Canadian Standards Association Joint
Component Recognition for Information
Technology Equipment Including
Electrical Business Equipment
9
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
OPT-1250xxxx Series
Ordering information
OPT- 1250X1X2X3X4X5X6X7
X1: Fiber
X5:
A: Multi-mode 850nm
B: Single-mode 1310nm
X2: Power Supply Voltage and SD Level
X6:
1: 5.0V, PECL SD Level
2: 3.3V, PECL SD Level
4: 3.3V, TTL SD Level
Shielding Type
Blank: Plastic housing
A: A type shielding
B: B type shielding
C: C type shielding
X7:
X3: Distance
Temperature
Blank: 0 to +70 degree C
H: -10 to + 85 degree C
F: 500m, 50/125μm MMF
I: 5km, 9/125μm SMF
Q: 10km, 9/125μm SMF
X4:
RoHS Compliant
Blank: Non-RoHS Compliant
R: RoHS Compliant
Data Coupling
1: 1x9SC DC/DC
2: 1x9SC AC/AC
10
DELTA ELECTRONICS, INC.
Sep., 2006
Rev. 0G
www.deltaww.com
Similar pages