HIGH POWER PHOTOIONIZER NEW L11754 OVERVIEW The L11754 PhotoIonizer eliminates electrostatic charges by utilizing a higher output than our previous PhotoIonizers. Features still include maintenance-free operation, zero dust generation, no overshooting (generating static charges of opposite polarity), and no need for air flow, yet the L11754 also boosts static electricity removal performance to drastically shorten the charge removal time. Wide-ranging removal of electrostatic charges in a short time gives a vastly improved tact time on production lines. ELECTROSTATIC CHARGE REMOVAL EFFECT 0.5 s 1.0 s 1.2 s 20 DISTANCE (cm) 130° 0.5 s 40 60 1s 80 1.2 s 100 200 150 100 50 0 50 SOFT X-RAY EMITTED AREA (cm) SPECIFICATIONS Parameter Ionization Method Type Ionization Tube Voltage (DC) Source Beam Angle Input Voltage (AC) Power Consumption Head Weight Controller Operating Ambient Temperature Operating Ambient Humidity Storage Temperature Storage Humidity Description / Value Soft X-ray exposure Soft X-ray tube 15 kV 130° 100 V to 240 V (50 Hz / 60 Hz) 50 W Max. 1.73 kg 1.41 kg 0 °C to +40 °C Below 60 % -10 °C to +60 °C Below 85 % 100 150 200 Measurement Conditions Charging voltage: 1 kV to 100 V Temperature: 25 °C Humidity: 50 % Measuring device: Charging plate (150 mm × 150 mm, 20 pF) Air flow: None FEATURES ●Quick removal of electrostatic charges for moving on high-speed production lines. ●Effectively removes static charges over a wide range with a small number of heads. Shield material thickness Shield material SUS 304 Aluminum plate A5052 Thickness (mm) 0.4 7 DIMENSIONAL OUTLINES (Unit: mm) ● HEAD: L11755 7.5 20 2-M4 EFFECTIVE DEPTH 8 40 40 55 33.5 44 53 20 80 120 2-M5 (for ONE TOUCH FITTING) 110 180.8 19.5 65 5 65 7-M4 EFFECTIVE DEPTH 10 34.5 100 TAPPA0098EA ● CONTROLLER: C11756 3 200 216 8.8 High Penetrative PhotoIonizer ON ION ACCESSORY OFF 7.5 ENT HEAD AC IN 18.9 F2 OFF 16 F1 ON 40 POWER 21 FRONT VIEW 174 SIDE VIEW 4-M3 44 93.5 26.5 REAR VIEW Control Cable: A10885 (20 mm) ! TAPPA0099EA SAFETY PRECAUTIONS • Soft X-rays emitted from this product are harmful to human health. Take adequate precautions to avoid X-ray exposure. • When using this product, always install the head inside an X-ray shielded cabinet or other shielded location with utilizing safety interlock mechanism. ! PRECAUTIONS TO USE • These products are high precision device. Handle it carefully so as not to apply shocks and vibrations. • The internal ion generator (soft X-ray tube) is a vacuum tube consisting of a glass envelope that may crack or rupture if subjected to shock. Do not apply strong shocks or vibrations to these products. • These products were designed for natural air cooling. Do not install it inside a small, air-tight container or locations where the generated heat cannot dissipate. • To install the head, always use the mounting screw holes in the metal base on the bottom of the head. • If these products does not operate correctly, turn the power off and check the cable connections. Then turn the power on again and recheck operation. If still inoperative then this product might be defective. Contact us for proper handling or repair. LEGAL REGULATIONS INVOLVING THIS PRODUCT These products must be used in compliance with health and safety regulations enforced to prevent the bodily harm caused by ionizing radiation. Users of these products must be familiar with the applicable laws that regulate use of X-ray emission devices. For more details, refer to international or domestic laws and regulations on ionizing radiation and comply with the required procedures listed there. WARRANTY PERIOD These device are guaranteed for one year from date of delivery. The warranty extends only to replacement of the products. The warranty does not cover damage due to misuse or natural calamity. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2012 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TAPP1075E01 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] China: HAMAMATSU PHOTONICS (CHINA) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: [email protected] APR. 2012 IP