J176 P-CHANNEL JFET Linear Systems replaces discontinued Siliconix J176 The J176 is a single P-Channel JFET switch This p-channel analog switch is designed to provide low on-resistance and fast switching. When used in combination with the complimentary J/SST111 nchannel family, the J176 simplifies series-shunt switching applications . J176 Benefits: Low Error Voltage High-Speed Analog Circuit Performance Negligible “Off-Error,” Excellent Accuracy Good Frequency Response Eliminates Additional Buffering rDS(on) ≤ 250Ω ID(off) = 10pA t(ON) 25ns Maximum Temperatures Storage Temperature Operating Junction Temperature Maximum Power Dissipation Continuous Power Dissipation MAXIMUM CURRENT Gate Current (Note 1) MAXIMUM VOLTAGES Gate to Drain Voltage Gate to Source Voltage J176 Applications: FEATURES DIRECT REPLACEMENT FOR SILICONIX J176 LOW ON RESISTANCE LOW GATE OPERATING CURRENT FAST SWITCHING ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted) Analog Switches Choppers Sample-and-Hold Normally “On” Switches Current Limiters J176 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTIC MIN TYP. BVGSS Gate to Source Breakdown Voltage 30 ‐‐ VGS(F) Gate to Source Forward Voltage ‐‐ ‐0.7 VGS(off) Gate to Source Cutoff Voltage 1 ‐‐ IDSS Drain to Source Saturation Current ‐2 ‐‐ IGSS Gate Reverse Current ‐‐ 0.01 IG Gate Operating Current ‐‐ 0.01 ID(off) Drain Cutoff Current ‐‐ ‐0.01 rDS(on) Drain to Source On Resistance ‐‐ ‐‐ MAX ‐‐ ‐‐ 4 ‐35 1 ‐‐ ‐1 250 UNITS V ‐55°C to +150°C ‐55°C to +135°C 350mW IG = ‐50mA VGDS = 30V VGSS = 30V CONDITIONS IG = ‐1µA, VDS = 0V IG = ‐1mA, VDS = 0V VDS = ‐15V, ID = ‐10nA VDS = ‐15V, VGS = 0V VGS = 20V, VDS = 0V VDG = ‐15V, ID = ‐1mA VDS = ‐15V, VGS = 0V VGS = 0V, VDS = ‐0.1V Click To Buy J176 SWITCHING CHARACTERISTICS @ 25°C (unless otherwise noted) SYMBOL CHARACTERISTIC UNITS td(on) Turn On Time 10 tr Turn On Rise Time 15 td(off) Turn Off Time 10 tf Turn Off Fall Time 20 nA Ω CONDITIONS VGS(L) = 0V VGS(H) = 10V ns See Switching Circuit Note 1 ‐ Absolute maximum ratings are limiting values above which J176 serviceability may be impaired. J176 SWITCHING CIRCUIT PARAMETERS VDD VGG RL RG ID(on) TO-92 (Bottom View) SWITCHING CIRCUIT ‐6V 8V 1800Ω 390Ω ‐3mA Micross Components Europe Available Packages: J176 in TO-92 J176 in bare die. Tel: +44 1603 788967 Email: [email protected] Web: http://www.micross.com/distribution Please contact Micross for full package and die dimensions Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email: [email protected] Web: www.micross.com/distribution.aspx