Panasonic AXT550124 Narrow-pitch, thin and slim connector for board-to-fpc connection Datasheet

NARROW-PITCH, THIN
AND SLIM CONNECTOR
FOR BOARD-TO-FPC
CONNECTION
NARROW PITCH (0.4 mm)
CONNECTORS F4S SERIES
FEATURES
Socket
Header
1. Space-saving (3.6 mm widthwise)
The required space is smaller than our
F4 series (40-contact type):
Socket — 27% smaller,
Header — 38% smaller
The small size contributes to the
miniaturization of target equipment.
Compliance with RoHS Directive
3. The simple lock structure gives
tactile feedback that ensures a
superior mating/unmating operation
feel.
Socket
Simple lock structure
)
cts
nta
.50
o
0c
(4
10
3.6
0
Pickup width: 0.8mm
Clips (soldering terminal)*
at the four corners
Clips (soldering terminal)*
at the four corners
Header
)
cts
nta
4
0(
2.6
0
9.8
o
0c
4. Gull-wing type terminals
The gull-wing type terminals facilitate
automatic mounting inspections.
5. Connectors for inspection available
Connectors for inspection are available
that are ideal for modular unit inspection
and inspection in device assembly
processes.
APPLICATIONS
* Clips for preventing the solder joints from being removed
2. Highly reliable
has strong
resistance to adverse environments.
(See Page 6 for details of the structure)
Note: If extra resistance to shock caused by dropping
is required, we recommend using our previous
F4 Series.
Compact portable devices “Cellular
phones, DVC, Digital cameras, etc”
Example of Board-to-FPC connections
Before
mating
FPC
Reinforcing plate
Narrow-pitch
connectors F4S
After
mating
Reinforcing
plate
(with FPC)
PCB
1.0mm
The simple lock mechanism ensures that the
connector clicks into position when it is inserted
for reliable single-action insertion on the PCB.
ORDERING INFORMATION
AXT
4
5: Narrow Pitch Connector F4S (0.4 mm pitch) Socket
6: Narrow Pitch Connector F4S (0.4 mm pitch) Header
Number of contacts (2 digits)
Mated height
<Socket>
1: For mated height 1.0 mm
2: For mated height 1.2 mm
<Header>
1: For mated height 1.0 mm
2: For mated height 1.2 mm
Functions
<Socket, Header>
2: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
4: Base: Ni plating Surface: Au plating (for Ni barrier available)
<Header>
4: Base: Ni plating Surface: Au plating
Note: Please note that models with a mated height of 1.0 mm (7th digit of part number is “1”) and 1.2 mm (7th digit of part number is “2”) are not compatible.
panasonic-electric-works.net/ac
Narrow-pitch connectors
AXT5, 6
Narrow-pitch connectors
AXT5, 6
PRODUCT TYPES
Mated height
1.0mm
1.2mm
Number of contacts
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
54
60
64
70
80
10
30
40
50
80
Part number
Socket
AXT510124
AXT512124
AXT514124
AXT516124
AXT518124
AXT520124
AXT522124
AXT524124
AXT526124
AXT528124
AXT530124
AXT532124
AXT534124
AXT536124
AXT538124
AXT540124
AXT542124
AXT544124
AXT546124
AXT548124
AXT550124
AXT554124
AXT560124
AXT564124
AXT570124
AXT580124
AXT510224
AXT530224
AXT540224
AXT550224
AXT580224
Packing
Header
AXT610124
AXT612124
AXT614124
AXT616124
AXT618124
AXT620124
AXT622124
AXT624124
AXT626124
AXT628124
AXT630124
AXT632124
AXT634124
AXT636124
AXT638124
AXT640124
AXT642124
AXT644124
AXT646124
AXT648124
AXT650124
AXT654124
AXT660124
AXT664124
AXT670124
AXT680124
AXT610224
AXT630224
AXT640224
AXT650224
AXT680224
Inner carton
Outer carton
3,000 pieces
6,000 pieces
Notes: 1. Order unit: For mass production: in 1-inner-box (1-reel) units
Samples for mounting check: in 50-connector units. Please contact our sales office.
Samples: Small lot orders are possible. Please contact our sales office.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
3. Please contact us for connectors having a number of contacts other than those listed above.
panasonic-electric-works.net/ac
SPECIFICATIONS
1. Characteristics
Electrical
characteristics
Mechanical
characteristics
Item
Rated current
Rated voltage
Specifications
0.3A/contact (Max. 5 A at total contacts)
60V AC/DC
Breakdown voltage
150V AC for 1 min.
Insulation resistance
Min. 1,000MΩ (initial)
Contact resistance
Max. 90mΩ
Composite insertion force
Composite removal force
Contact holding force
(Socket contact)
Ambient temperature
Max. 0.981N/contacts × contacts (initial)
Min. 0.165N/contacts × contacts
Soldering heat resistance
Storage temperature
Environmental
characteristics
Thermal shock resistance
(header and socket mated)
Lifetime
characteristics
Unit weight
Based on the contact resistance measurement method
specified by JIS C 5402.
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures. No dew condensation.
–55°C to +85°C
Peak temperature: 260°C or less (on the surface of
the PC board around the connector terminals)
300°C within 5 sec. 350°C within 3 sec.
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
Insertion and removal life
50 times
Infrared reflow soldering
Soldering iron
No freezing at low temperatures. No dew condensation.
Sequence
1. –55 −30 °C, 30 minutes
2. ~ , Max. 5 minutes
3. 85 +30 °C, 30 minutes
4. ~ , Max. 5 minutes
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
H2S resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Using 250V DC megger (applied for 1 min.)
Min. 0.49N/contacts
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
48 hours,
contact resistance max. 90mΩ
Humidity resistance
(header and socket mated)
Conditions
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200 times/
hours
20-contact type: Socket: 0.03 g Header: 0.01 g
2. Material and surface treatment
Part name
Molded
portion
Contact and
Post
Material
LCP resin
(UL94V-0)
Copper alloy
Surface treatment
—
Contact portion: Base: Ni plating Surface: Au plating
Terminal portion: Base: Ni plating Surface: Au plating (except the terminal tips)
The socket terminals close to the portion to be soldered have nickel barriers (exposed nickel portions).
Metal clips: Sockets: Base: Ni plating Surface: Pd+Au flash plating (except the terminal tips)
Headers: Base: Ni plating Surface: Au plating (except the terminal tips)
panasonic-electric-works.net/ac
Narrow-pitch connectors
AXT5, 6
DIMENSIONS (Unit: mm)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://panasonic-electric-works.net/ac
Socket (Mated height: 1.0 mm and 1.2 mm)
Dimension table (mm)
A
B±0.1
0.40±0.05
0.15±0.03
Terminal coplanarity
D
(Contact and clips
(soldering terminal)*)
(0.62)
3.60
2.36
(0.62)
0.08
3.00
0.80 (Suction face)
CAD Data
C0.15
2.00
3.60
Y note
General tolerance: ±0.2
0.45
0.30±0.03
C±0.1
(0.80)
Z note
Mated height/
dimension
1.0mm
1.2mm
Note: Since the clip (soldering terminal)* has a single-piece construction,
sections Y and Z are electrically connected.
D
0.97
1.17
Header (Mated height: 1.0 mm and 1.2 mm)
D
Terminal coplanarity
0.08
1.68
(0.46)
13
C
0.
1.86
2.60
5
(Post and clips
(soldering terminal)*)
.1
A
B±0.1
0.40±0.05
0.15±0.03
Number of contacts/
dimension
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
54
60
64
70
80
A
B
C
4.5
4.9
5.3
5.7
6.1
6.5
6.9
7.3
7.7
8.1
8.5
8.9
9.3
9.7
10.1
10.5
10.9
11.3
11.7
12.1
12.5
13.3
14.5
15.3
16.5
18.5
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.4
4.8
5.2
5.6
6.0
6.4
6.8
7.2
7.6
8.0
8.4
8.8
9.2
9.6
10.4
11.6
12.4
13.6
15.6
3.4
3.8
4.2
4.6
5.0
5.4
5.8
6.2
6.6
7.0
7.4
7.8
8.2
8.6
9.0
9.4
9.8
10.2
10.6
11.0
11.4
12.2
13.4
14.2
15.4
17.4
A
B
C
3.8
4.2
4.6
5.0
5.4
5.8
6.2
6.6
7.0
7.4
7.8
8.2
8.6
9.0
9.4
9.8
10.2
10.6
11.0
11.4
11.8
12.6
13.8
14.6
15.8
17.8
1.6
2.0
2.4
2.8
3.2
3.6
4.0
4.4
4.8
5.2
5.6
6.0
6.4
6.8
7.2
7.6
8.0
8.4
8.8
9.2
9.6
10.4
11.6
12.4
13.6
15.6
3.2
3.6
4.0
4.4
4.8
5.2
5.6
6.0
6.4
6.8
7.2
7.6
8.0
8.4
8.8
9.2
9.6
10.0
10.4
10.8
11.2
12.0
13.2
14.0
15.2
17.2
Dimension table (mm)
R0
0.80 (Suction face)
CAD Data
3
1
0.
C
1.90
Clip
(soldering terminal)*
0.15±0.03
C±0.1
0.94
(0.48)
Clip
(soldering terminal)*
General tolerance: ±0.2
Mated height/
dimension
1.0mm
1.2mm
D
0.83
1.01
Number of contacts/
dimension
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
54
60
64
70
80
Header
Socket
Mated height: 1.0 mm
Header
Socket
1.20±0.15
• Socket and Header are mated
1.00±0.15
Narrow-pitch connectors
AXT5, 6
Mated height: 1.2 mm
panasonic-electric-works.net/ac
AXT5, 6
• Specifications for the plastic reel
(In accordance with EIAJET-7200B.)
• Specifications for taping
(In accordance with JIS C 0806-1990. However, not applied to
the mounting-hole pitch of some connectors.)
Tape I
Tape II
A±0.3
D±1
A±0.3
C
4
2
8.0
1.5+0.1
0 dia.
Top cover tape
1.75
380 dia.
C
Leading direction after packaging
Leading direction after packaging
Taping reel
B
1.75
Narrow-pitch connectors
EMBOSSED TAPE DIMENSIONS (Unit: mm) (Common to all sockets and headers)
4
2
Embossed carrier tape
Embossed mounting-hole
8.0
1.5+0.1
0 dia.
• Dimension table (Unit: mm)
Type/Mated height
Number of contacts
Type of taping
A
B
C
D
Quantity per reel
Common for
sockets and headers:
1.0mm, 1.2mm
24 or less
26 to 70
80
Tape I
Tape I
Tape II
16.0
24.0
32.0
—
—
28.4
7.5
11.5
14.2
17.4
25.4
33.4
3,000
3,000
3,000
• Connector orientation with respect to embossed tape feeding direction
Type
Common for F4S
Direction
of tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
panasonic-electric-works.net/ac
AXT5, 6
Narrow-pitch connectors
CONNECTOR FOR INSPECTION
USAGE APPLICATIONS WITH
3,000 INSERTION AND
(0.4 mm PITCHES)
REMOVAL TIMES
NARROW PITCH CONNECTOR F4S
FOR INSPECTION USAGE
Socket
Header
Compliance with RoHS Directive
FEATURES
APPLICATIONS
1. 3,000 insertion and removals (when
as recommended)
2. Same external dimensions and foot
pattern as standard type.
3. Improved mating
Insertion and removal have become
easier due to a reduction in the mating
retention force required by the simple
locking structure and also in the amount
of force needed for insertion and
removal. (We cannot warrant anything
regarding mating retention.)
Ideal for module unit inspection and
equipment assembly inspection
TABLE OF PRODUT TYPES
✩: Available for sale
Product name
F4S
for inspection
10
✩
12
✩
14
✩
16
✩
18
✩
20
✩
22
✩
24
✩
26
✩
28
✩
30
✩
Number of contacts
32 34 36 38
✩
✩
✩
✩
40
✩
42
✩
44
✩
46
✩
48
✩
50
✩
54
✩
60
✩
64
✩
70
✩
80
✩
Notes: 1. Please inquire about numbers of contacts other than those given above.
2. Please inquire with us regarding delivery times.
3. Please keep the minimum unit for ordering no less than 50 pieces per lot.
4. Please inquire for further information.
PRODUCT TYPES
Socket
Specifications
Without positioning bosses
Part No.
AXT5E∗∗26
Header
Specifications
Without positioning bosses
Part No.
AXT6E∗∗26
Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of contacts for the required connector.
2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our
sales office.
panasonic-electric-works.net/ac
NOTES
Recommended PC board pattern (TOP VIEW)
0.23±0.03
0.40±0.03
: Insulation area
0.80±0.03
0.45±0.03
2.06±0.03
0.75±0.03
(0.655)
1.80±0.03
(1.20)
0.90±0.03
0.70±0.03
0.23±0.03
0.40±0.03
Max. 1.00
(0.75)
1.70±0.03
3.20±0.03
• Header
Recommended PC board pattern (TOP VIEW)
(0.92)
2.36±0.03
4.20±0.03
• Socket
: Insulation area
Metal mask thickness: When 150µm
(Terminal opening ratio: 48%)
(Metal-part opening ratio: 100%)
0.80±0.01
0.45±0.01
2.06±0.01
0.75±0.01
(0.655)
4.20±0.01
1.80±0.01
(1.20)
0.90±0.01
0.70±0.01
0.20±0.01
0.40±0.01
(0.41)
2.18±0.01
3.00±0.01
Recommended metal mask opening pattern
Metal mask thickness: When 150µm
(Terminal opening ratio: 48%)
(Metal-part opening ratio: 100%)
(0.51)
2.98±0.01
4.00±0.01
Recommended metal mask opening pattern
0.20±0.01
0.40±0.01
Metal mask thickness: When 120µm
(Terminal opening ratio: 60%)
(Metal-part opening ratio: 100%)
0.20±0.01
0.40±0.01
0.80±0.01
0.45±0.01
2.06±0.01
0.75±0.01
(0.655)
0.90±0.01
0.70±0.01
(0.52)
1.96±0.01
3.00±0.01
Recommended metal mask opening pattern
Metal mask thickness: When 120µm
(Terminal opening ratio: 60%)
(Metal-part opening ratio: 100%)
(0.63)
2.74±0.01
4.00±0.01
Recommended metal mask opening pattern
4.20±0.01
1.80±0.01
(1.20)
1. If extra resistance to drop impact is
required, we recommend using our F4
series.
2. Recommended PC board and metal
mask patterns
Appropriate control of solder amount is
required to minimize solder bridges and
other defects for connectors with 0.4-mm
or 0.5-mm pitch terminals, which require
high-density mounting. Refer to the righthand drawing for recommended patterns.
0.20±0.01
0.40±0.01
For other details, please verify with
the product specification sheets.
panasonic-electric-works.net/ac
Narrow-pitch connectors
AXT5, 6