Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 General Description Features The AM9799 is a single-phase DC brushless motor driver IC featuring BiCMOS process. It is suitable for fan motor drivers for low voltage equipment such as the note personal computers. The AM9799 includes lock shutdown, automatic restart, frequency generator (FG), have been incorporated into one chip. When the motor is under lock condition, lock shutdown function turns off the output current. When the lock condition is removed, the IC automatically restarts and allows DC fan to run. In addition, the FG function is to output rotation speed signal. It features MOS-FET driver circuit for better saturation characteristics. Slew late of amplifiers and feedback resistors are optimized to achieve low-noise motor operation. • The AM9799 is available in MSOP-8 package. • • • • • • • • Lock Detection and Rotational Speed Sensing Mechanisms are Built-in Rotor-locked Protection and Automatic Restart When the Motor Lock is Undone Hall Bias Built-in and Hall Inputs Have a Hysteresis Built-in Thermal Shutdown Circuit Built-in Over Current Protection Operating Voltage: VCC=2V to 6V BiCMOS Technology Compact Package: MSOP-8 Applications CPU Cooler Computers Fan in Notebook Personal MSOP-8 Figure 1. Package Type of AM9799 Sep. 2009 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Pin Configuration MM Package (MSOP-8) OUT2 1 8 GND H+ 2 7 OUT1 HB 3 6 VCC H- 4 5 FG Figure 2. Pin Configuration of AM9799 (Top View) Pin Description Pin Number Pin Name 1 OUT2 2 H+ Hall input(+) 3 HB Hall bias 4 H- Hall input(-) 5 FG Frequency generator 6 VCC Power supply 7 OUT1 Driver out1 8 GND Ground Sep. 2009 Function Driver out2 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Functional Block Diagram Figure 3. Functional Block Diagram of AM9799 Ordering Information AM9799 - G1: Green Circuit Type TR: Tape & Reel Blank: Tube Package MM: MSOP-8 Package Temperature Range MSOP-8 -40 to 105°C Part Number Marking ID Packing Type AM9799MM-G1 AM9799MM-G1 Tube AM9799MMTR-G1 AM9799MM-G1 Tape & Reel BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and green. Sep. 2009 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Absolute Maximum Ratings (TA=25°C, Note 1) Parameter Symbol Value Unit Supply Voltage VCC 7 V Output Current IO (max) 1 A FG Output Current IFG 5 mA FG Output Voltage VFG 7 V 260 °C Lead Temperature (Soldering 10s) Power Dissipation PD 585 mW Junction Temperature TJ 150 °C Thermal Resistance (Die to Ambient) θJA 214 °C/W Storage Temperature Range TSTG -55 to 150 °C ESD (Human Body Model) (Note 2) ESD 2000 V Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. Note 2: Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products. Recommended Operating Conditions (TA=25°C) Parameter Symbol Min Max Unit Supply Voltage VCC 2 6 V Hall Input Voltage Range VH 0.4 VCC -1.1 V Operating Temperature TOP -40 105 °C Sep. 2009 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Electrical Characteristics VCC =5V, TA=25°C, unless otherwise specified. Parameter Symbol Supply Current Conditions Min ICC Input Offset Voltage Typ Max Unit 4 6 mA ±4 mV 0.3 0.45 V 48 50 dB 0.3 V VHOFS IO=250mA upper and lower total Output Saturation Voltage VO Input-output Gain GIN FG Low Voltage VFGL Input Hysteresis Voltage VHYS ±6 ±10 ±15 mV Lock Detection ON time TON 0.35 0.5 0.7 sec Lock Detection OFF time TOFF 3.5 5 7 sec Hall Bias Voltage VHB 1.15 1.3 1.45 V 45 IFG=3mA IHB=5mA Typical Performance Characteristics Power Dissipation (mW) 800 600 400 200 0 -25 0 25 50 75 100 125 150 o Ambient Temperature ( C) Figure 4. Power Dissipation vs. Ambient Temperature Sep. 2009 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Thermal Shut Down (TSD) This IC is built-in TSD. TSD has the temperature hysteresis. Output ON TSD OFF TSD ON Output OFF 150ºc 175ºc TSD ON (Typ. 175°C ) All output transistor OFF. TSD OFF (Typ. 150°C) Reset ordinary motion. (It has the temperature hysteresis of 25°C <TYP>) Figure 5. Thermal Shut Down Lock Detection, Automatic Restart Circuit This IC detects the rotation of the motor by hall signal, and adjusts lock detection ON time (Ton) and lock detection OFF time (Toff) by the internal counter. These time (Ton, Toff) are showed below. H+ OUT1 TON TOFF OUT2 FG Lock Reset Cancel Motion Motor Lock Ordinary Figure 6. The Function of Rotor-locked Protection and Auto Restart Diagram of AM9799 Sep. 2009 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Typical Application Figure 7. Typical Application of AM9799 Sep. 2009 Rev. 1. 0 BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet Single Phase Full-wave Low Voltage Fan Motor Driver AM9799 Mechanical Dimensions MSOP-8 Sep. 2009 Rev. 1. 0 Unit: mm(inch) BCD Semiconductor Manufacturing Limited 8 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE IMPORTANT NOTICE BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifications herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular purpose, particular purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of any of any its its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights other rights nor nor the the rights rights of of others. others. MAIN SITE SITE MAIN - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788