Series AM1DR-Z 1 Watt | DC-DC Converter FEATURES: • • • • Models Single output Model Input Voltage (V) AM1DR-0503SZ AM1DR-0505SZ AM1DR-0507SZ AM1DR-0509SZ AM1DR-0512SZ AM1DR-0515SZ AM1DR-1203SZ AM1DR-1205SZ AM1DR-1207SZ AM1DR-1209SZ AM1DR-1212SZ AM1DR-1215SZ AM1DR-2403SZ AM1DR-2405SZ AM1DR-2407SZ AM1DR-2409SZ AM1DR-2412SZ AM1DR-2415SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 AM1DR-0503SH30Z AM1DR-0505SH30Z AM1DR-0507SH30Z AM1DR-0509SH30Z AM1DR-0512SH30Z AM1DR-0515SH30Z AM1DR-1203SH30Z AM1DR-1205SH30Z AM1DR-1207SH30Z AM1DR-1209SH30Z AM1DR-1212SH30Z AM1DR-1215SH30Z AM1DR-2403SH30Z AM1DR-2405SH30Z AM1DR-2407SH30Z AM1DR-2409SH30Z AM1DR-2412SH30Z AM1DR-2415SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Input Specifications Parameters Voltage range Filter Turn on Transient process time Start up time www.aimtec.com F 051e R6.F RoHS compliant Regulated output voltage Low ripple and noise High efficiency up to 70% Output Voltage (V) 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 3.3 5 7.2 9 12 15 Nominal 5 12 24 • • • • Output Current max (mA) Operating temperature -40oC to + 85oC Input / Output Isolation 1000 & 3000VDC Pin compatible with multiple manufacturers 7 pin SIP package Isolation (VDC) 300 200 138 111 84 67 300 200 138 111 84 67 300 200 138 111 84 67 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 300 200 138 111 84 67 300 200 138 111 84 67 300 200 138 111 84 67 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 Typical 4.5-5.5 10.8-13.2 21.6-26.4 200 Tel: +1 514 620 2722 1 of 3 Capacitor Max Capacitive Load (uF) Efficiency (Full load) (%) 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 57 67 65 67 70 70 57 65 65 67 70 70 60 65 65 68 70 70 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 57 67 65 67 70 70 57 65 65 67 70 70 60 68 65 68 70 70 Maximum Units 100 ms ms VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DR-Z 1 Watt | DC-DC Converter Input Specifications (continued) Parameters Nominal Typical Absolute Maximum Rating Peak Input Voltage time Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Parameters Voltage accuracy Short Circuit protection Line voltage regulation (Single) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Temperature coefficient Ripple & Noise Capacitive load Rising time Rated Typical ±2 ±0.5 ±0.5 0% to 100% load ±1.0 At 20MHz Bandwidth ±0.02 60 Conditions Typical 100% load 125 Full Load without Derating VDC MOhm pF Maximum Units % % % % %/oC mV p-p μF ms 220 50 Parameters Units 1000 & 3000 Momentary (1 sec) 0% to 100% load General Specifications Switching frequency Max Case temperature Operating temperature Storage temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF ms > 1000 60 Conditions Units VDC Typical 3 sec Output Specifications Maximum 0-7 0-15 0-28 100 5 Vin 12 Vin 24 Vin Maximum -40 to +85 -55 to +125 Not Required Free air convection +95 Units KHz o C o C o C 95 % Non conductive black plastic 2.7 g 0.76 x 0.28 x 0.37 inch 19.50 x 7.20 x 9.50 mm >880 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Safety Specifications Parameters Agency Approvals Safety Standards www.aimtec.com F 051e R6.F CE EN 55022, Class B IEC61000-4-2 IEC61000-4-3 IEC61000-4-4 IEC61000-4-6 IEC61000-4-8 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DR-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 4 5 6 7 1000VDC Dimensions 3000VDC + V Input - V Input - V Output No pin + V Output No pin + V Input - V Input No pin - V Output No pin + V Output 19.50 (0.76) 7.20 (0.28) PRINTED FACE 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 10.0 (0.39) 4.10 (0.16) 15.20 (0.60) 0.50 (0.02) 7.20 (0.28) 0.50 (0.02) 0.25 (0.01) 1.25 (0.05) Radiated and Conducted Emissions Application circuit: C1 470µF/100V L1 12 µH NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.F Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only