Surface Mount Bias-Tee 50Ω JEBT-4R2G+ Wideband Maximum Ratings Operating Temperature 10 to 4200 MHz -40°C to 85°C Storage Temperature -55°C to 100°C RF Power 30dBm max. Voltage at DC port 25V max. Input Current 500mA DC resistance from DC to RF&DC port 4.5 ohm typ. Permanent damage may occur if any of these limits are exceeded. Pin Connections RF 15 RF&DC 10 DC Features • wideband, 10 to 4200 MHz • low insertion loss, 0.6 dB typ. • good isolation, 40 dB typ. all other pins Outline Drawing +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • biasing amplifiers, laser diodes, active antenna • DC return • DC blocking • satellite communication Bias-Tee Electrical Specifications 24 GROUND CASE STYLE: BL301 FREQUENCY (MHz) fL fU 10 4200 INSERTION LOSS* (dB) ISOLATION* (dB) (RF port to DC port) (RF&DC port to DC port) L M U Typ. Max. Typ. Max. Typ. Max. 0.15 0.6 0.6 0.6 1.2 L 1.6 M U Typ. Min. Typ. Min. Typ. Min. 32 20 40 20 40 20 L= low range (fL to 10 fL) M= mid range (10 fL to fU/2) U= upper range (fU/2 to fU) * Insertion Loss and Isolation are guaranteed up to 20 dBm-RF power and 200mA DC current. PCB Land Pattern Typical Performance Data Freq. (MHz) Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .940 23.88 B 1.260 32.00 C --- D .100 2.54 E .390 9.91 F .080 2.03 G .100 2.54 H .047 1.19 J .065 1.65 K .065 1.65 L .970 24.64 wt grams 7.2 Demo Board MCL P/N: TB-359 Suggested PCB Layout (PL-216) Pin (dBm) INSERTION LOSS (dB) with Current 0mA 20mA 50mA ISOLATION (dB) (Pin= -10dBm) with current 100mA 150mA 200mA 10mA 20mA 50mA VSWR (:1) 100mA 150mA 200mA 0.10 0.27 0.53 1.06 10.00 19.80 19.80 19.80 19.80 18.50 0.17 0.13 0.12 0.13 0.16 0.17 0.13 0.12 0.13 0.17 0.16 0.13 0.12 0.12 0.17 0.17 0.14 0.11 0.11 0.16 0.20 0.14 0.11 0.12 0.16 0.24 0.15 0.11 0.12 0.16 19.46 25.86 29.17 30.81 30.06 19.04 25.53 28.98 30.74 30.07 17.83 24.52 28.36 30.56 30.07 14.58 21.43 26.18 29.62 30.20 12.66 19.31 24.40 28.62 30.38 11.75 18.16 23.37 27.92 30.56 1.16 1.07 1.04 1.02 1.04 114.75 324.25 743.25 952.75 1581.25 19.50 19.70 18.70 18.20 18.00 0.22 0.50 0.28 0.31 0.46 0.25 0.55 0.31 0.33 0.48 0.24 0.53 0.30 0.33 0.47 0.22 0.52 0.29 0.31 0.46 0.22 0.53 0.29 0.32 0.48 0.22 0.56 0.29 0.33 0.49 34.45 44.65 51.19 40.75 42.58 34.49 44.61 50.50 40.80 42.59 34.27 44.25 50.16 40.97 43.94 33.99 43.90 50.65 40.97 43.77 33.83 43.91 51.69 40.93 44.36 33.59 43.34 52.47 40.95 44.17 1.07 1.06 1.06 1.11 1.13 2000.25 2524.00 3047.75 3676.25 4200.00 17.10 14.40 14.20 15.10 17.90 0.46 0.40 0.45 0.73 1.04 0.48 0.42 0.48 0.74 1.07 0.47 0.41 0.47 0.75 1.07 0.46 0.42 0.46 0.75 1.06 0.46 0.43 0.46 0.75 1.05 0.47 0.44 0.49 0.75 1.06 45.46 53.15 52.46 46.32 28.42 45.57 53.72 52.25 47.19 28.36 45.73 52.19 51.55 46.36 28.24 45.48 53.17 51.33 45.53 28.14 46.14 52.67 51.46 46.19 28.01 45.28 53.67 50.99 45.65 27.92 1.12 1.12 1.09 1.07 1.09 4502.50 4802.00 5251.75 5550.75 6000.00 -0.60 -0.70 -1.10 -2.00 -2.40 1.17 1.26 1.19 1.65 1.70 1.19 1.26 1.17 1.63 1.71 1.18 1.27 1.16 1.60 1.65 1.19 1.25 1.13 1.56 1.59 1.17 1.22 1.11 1.54 1.54 1.16 1.20 1.09 1.51 1.50 28.15 37.95 49.68 38.44 34.37 28.10 38.01 51.04 38.56 34.36 28.05 38.19 49.12 38.36 34.23 27.96 37.93 49.37 38.07 34.40 27.84 37.58 49.13 37.85 34.49 27.87 37.51 48.19 38.19 34.48 1.14 1.12 1.11 1.10 1.12 Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M151107 JEBT-4R2G DJ/RS/CP 150814 JEBT-4R2G+ Performance Charts JEBT-4R2G+ INSERTION LOSS WITH CURRENT JEBT-4R2G+ ISOLATION WITH CURRENT 2.0 60 INSERTION LOSS (dB) 0mA 100mA 200mA ISOLATION (dB) 1.6 1.2 0.8 0.4 0.0 50 40 30 20 10mA 100mA 200mA 10 0 1000 2000 3000 4000 FREQUENCY (MHz) 5000 6000 5000 6000 0 1000 2000 3000 4000 FREQUENCY (MHz) 5000 JEBT-4R2G+ VSWR 1.20 1.16 VSWR 1.12 1.08 1.04 1.00 0 1000 2000 3000 4000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 6000