DFLT5V0A - DFLT51A 225W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR PowerDI ä123 NEW PRODUCT Features · 225W Peak Pulse Power Dissipation (10ms x 1000ms waveform) · · · · · 5.0V - 51V Standoff Voltages PowerDIä123 D Excellent Clamping Capability H Lead Free Finish, RoHS Compliant (Note 6) A "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability B Mechanical Data · · · · · · · · Case: PowerDIä123 C Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 E L L1 Moisture Sensitivity: Level 1 per J-STD-020C E Terminal Connections: Cathode Band Terminals: Finish ¾ Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 L2 L3 L4 A Dim Min Max Typ A 3.50 3.90 3.70 B 2.60 3.00 2.80 C 1.63 1.93 1.78 D 0.93 1.00 0.98 1.00 E 0.85 1.25 H 0.15 0.25 0.20 L 0.45 0.85 0.65 L1 — — 1.35 L2 — — 1.10 L3 — — 0.20 L4 0.90 1.30 1.05 All Dimensions in mm Marking & Type Code Information: See Last Page Ordering Information: See Last Page Weight: 0.01 grams (approximate) Maximum Ratings @ TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Peak Pulse Power Dissipation (Note 1) 10/1000ms (Note 2) 8/20ms PPK 225 1125 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave IFSM 50 A VF 3.5 V Tj -65 to +150 °C TSTG -65 to +150 °C Value Unit Instantaneous Forward Voltage (Note 5) @ IPP = 12A Operating Temperature Range Storage Temperature Range Thermal Characteristics @ TA = 25°C unless otherwise specified Characteristic Symbol PD 1.0 W Thermal Resistance, Junction to Ambient (Note 3) RqJA 125 °C/W Thermal Resistance, Junction to Soldering Point (Note 4) RqJS 6 °C/W DC Steady-State Power Dissipation (Note 3) Notes: 1. 2. 3. 4. 5. 6. Non-Repetitive current pulse as shown in figure 3 and derated above T A = 25°C as per figure 1. Non-Repetitive current pulse as shown in figure 5 and derated above TA = 25°C as per figure 1. Device mounted on 1"x1", FR-4 PCB; 2 oz. Cu pad layout as shown on Diodes Inc. suggested pad layout document AP02001.pdf. Theoretical RqJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction. 1/2 sine wave (or equivalent square wave), pulse width = 8.3ms, duty cycle = 4 pulses/minute maximum. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS30581 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 4 www.diodes.com DFLT5V0A - DFLT51A ã Diodes Incorporated NEW PRODUCT Table 1 Part Number Reverse Standoff Voltage Breakdown Voltage VBR @ IT (Note 7) Test Current Max. Reverse Leakage @ VRWM Max. Peak Max. Clamping Pulse Current Voltage @ Ipp Ipp Marking Code VRWM (V) Min (V) Max (V) IT (mA) IR (mA) VC (V) (A) DFLT5V0A 5.0 6.40 7.0 10 400 9.2 24.5 FAE DFLT6V0A 6.0 6.67 7.37 10 400 10.3 21.8 FAG DFLT6V5A 6.5 7.22 7.98 10 250 11.2 20.1 FAK DFLT7V0A 7.0 7.78 8.60 10 100 12.0 18.8 FAM DFLT7V5A 7.5 8.33 9.21 1.0 50 12.9 17.4 FAP DFLT8V0A 8.0 8.89 9.83 1.0 25 13.6 16.5 FAR DFLT8V5A 8.5 9.44 10.4 1.0 10 14.4 15.6 FAT DFLT9V0A 9.0 10.0 11.1 1.0 5.0 15.4 14.6 FAV DFLT10A 10 11.1 12.3 1.0 2.5 17.0 13.2 FAX DFLT11A 11 12.2 13.5 1.0 2.5 18.2 12.4 FAZ DFLT12A 12 13.3 14.7 1.0 2.5 19.9 11.3 FBE DFLT13A 13 14.4 15.9 1.0 1.0 21.5 10.5 FBG DFLT14A 14 15.6 17.2 1.0 1.0 23.2 9.7 FBK DFLT15A 15 16.7 18.5 1.0 1.0 24.4 9.22 FBM DFLT16A 16 17.8 19.7 1.0 1.0 26.0 8.65 FBP DFLT17A 17 18.9 20.9 1.0 1.0 27.6 8.15 FBR DFLT18A 18 20.0 22.1 1.0 1.0 29.2 7.71 FBT DFLT20A 20 22.2 24.5 1.0 1.0 32.4 6.94 FBV DFLT22A 22 24.4 26.9 1.0 1.0 35.5 6.34 FBX DFLT24A 24 26.7 29.5 1.0 1.0 38.9 5.78 FBZ DFLT26A 26 28.9 31.9 1.0 1.0 42.1 5.35 FCE DFLT27A 27 30 33.15 1.0 1.0 43.7 5.15 FCF DFLT28A 28 31.1 34.4 1.0 1.0 45.4 4.96 FCG DFLT30A 30 33.3 36.8 1.0 1.0 48.4 4.65 FCK DFLT33A 33 36.7 40.6 1.0 1.0 53.3 4.22 FCM DFLT36A 36 40.0 44.2 1.0 1.0 58.1 3.87 FCP DFLT40A 40 44.4 49.1 1.0 1.0 64.5 3.49 FCR DFLT43A 43 47.8 52.8 1.0 1.0 69.4 3.24 FCT DFLT45A 45 50.0 55.3 1.0 1.0 72.7 3.10 FCV DFLT48A 48 53.3 58.9 1.0 1.0 77.4 2.91 FCX DFLT51A 51 56.7 62.7 1.0 1.0 82.4 2.73 FCZ Notes: 7. VBR measured at pulse test current IT with tp £5.0ms at TA = 25°C. DS30581 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 2 of 4 www.diodes.com DFLT5V0A - DFLT51A P(AV), STEADY STATE POWER DISSIPATION (W) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 75 50 25 10 X 1000 Waveform as defined by REA 0 0 25 50 75 1.2 1.0 0.8 0.6 0.4 0.2 0 Peak Value Ipp Half Value Ipp/2 50 tp 0 100 1 125 100 150 Peak Value Ipp Half Value Ipp/2 50 tp 10 X 1000 Waveform as defined by R.E.A. 0 75 TT, TERMINAL TEMPERATURE (° C) Fig. 2 Steady State Power Derating Curve IPP, PEAK PULSE CURRENT (%Ipp) IPP, PEAK PULSE CURRENT (%Ipp) 100 50 25 0 100 125 150 175 200 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Pulse Derating Curve 3 2 8x20 Waveform as defined by R.E.A. 0 0 60 20 40 t, TIME (ms) Fig. 4 Pulse Waveform t, TIME (ms) Fig. 3 Pulse Waveform 1600 100 TOTAL CAPACITANCE (pF) Non Repetitive Pulse Waveform Shown in Fig. 4 10 1.0 0.1 0.1 VR = 0V f = 1MHz 1400 Tj = 25° C PPK, PEAK PULSE POWER (kW) NEW PRODUCT 100 1200 1000 800 600 400 200 1.0 10 100 tp, PULSE WIDTH (ms) Fig. 5 Pulse Rating Curve 1000 10000 0 0 10 20 30 40 50 60 TOTAL CAPACITANCE Fig. 6 VRWM (V) DS30581 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 4 www.diodes.com DFLT5V0A - DFLT51A Notes: (Note 8) Device Packaging Shipping DFLTxxxA-7* PowerDIä123 3000/Tape & Reel 8. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. * Add "-7" to the appropriate type number in Table 1 on page 2. Example: 10V reverse standoff device = DFLT10A-7. Marking Information FXX FXX = Product Type Marking Code (See Marking Codes on Page 2) YM = Date Code Marking Y = Year (ex: R = 2004) M = Month (ex: 9 = September) YM NEW PRODUCT Ordering Information Date Code Key Year 2004 2005 2006 2007 2008 2009 Code R S T U V W Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30581 Rev. 3 - 2 PowerDI is a trademark of Diodes Incorporated. 4 of 4 www.diodes.com DFLT5V0A - DFLT51A