Process Sealed Subminiature Antistatic Toggles Series B Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator’s touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Optional threaded, 6mm diameter bushing for panel seal mounting meets IP65 of IEC60529 specifications (similar to NEMA 4 and 13). Totally sealed body construction prevents contact contamination and allows timeand money-saving soldering and cleaning. Epoxy sealed terminals lock out flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Illuminated toggles available and shown in the Illuminated Other section. Actual Size NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Toggles Series B General Specifications Electrical Capacity (Resistive Load) Logic Level: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Contact Timing: Angle of Throw: Materials & Finishes Toggle: Bushing: Gasket: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Mounting Torque: PCB Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. 50 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 50,000 operations minimum for locking lever models 50,000 operations minimum Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained) Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained) Toggle L: 0.59N Nonshorting (break-before-make) 26° Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Nitrile butadiene rubber Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Copper alloy with gold plating Copper alloy with gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) .30 ~ .45Nm (2.65 ~ 3.98 lb • in) for A1 actuator with threaded bushing only Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Automated cleaning. See Cleaning specifications in Supplement section. UL94V-0 available The B Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Toggles Series B TYPICAL SWITCH ORDERING EXAMPLE 1 B 2 A B PC TERMINALS POLES 1 SPDT P 2 DPDT *B Straight with Bracket *H Right Angle with Bracket *V Vertical with Bracket W Straight Straight Long * Bracketed models are ESD protected CIRCUITS 2 ON 3 ON OFF ON 5 ON NONE (ON) *R (ON) NONE ON 8 (ON) OFF (ON) 9 ON OFF (ON) *S (ON) OFF ON NONE ON OPTIONAL CAPS TOGGLES A A1 .394” (10.0mm) Bat G .394” (10.0mm) Bat Lever Cap .315” (8.0mm) Bat with Panel Seal Threaded Bushing (Straight PC only) J .248” (6.3mm) Bat Lever Cap J .248” (6.3mm) Bat ( ) = Momentary E .394” (10.0mm) Flatted * Reverse circuits R & S available with right angle & vertical only H .248” (6.3mm) Flatted K Snap Top for A or B Paddle L Locking Lever (with Circuits 2 & 3 only) PADDLES A Short Paddle for K Toggle B Long Paddle for K Toggle CAP COLORS DESCRIPTION FOR TYPICAL ORDERING EXAMPLE B12AB .394” (10.0mm) Bat Toggle Straight PC Terminals with Bracket PADDLE COLORS A Black A B White B C Red C --- Yellow E --- Green F --- Blue G --- Gray H SPDT ON-NONE-ON Circuit NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series B Process Sealed Subminiature Antistatic Toggles POLES & CIRCUITS Toggle Position ( ) = Momentary Up Center Connected Terminals Down Throw & Schematics Up Center Down Note: Pole Model SP B12 B13 B15 B1R B18 B19 B1S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON 2-3 OPEN 2-1 SPDT DP B22 B23 B25 B2R B28 B29 B2S ON ON ON (ON) (ON) ON (ON) NONE OFF NONE NONE OFF OFF OFF ON ON (ON) ON (ON) (ON) ON 2-3 5-6 OPEN 2-1 5-4 DPDT Slot Slot Terminal numbers are not actually on the switch. 2 (COM) 3 1 2 3 5 (COM) 1 6 4 TOGGLES Standard Material & Finish: Brass with Bright Nickel A .394” (10.0mm) Bat A1 .315” (8.0mm) Bat with Panel Seal Threaded Bushing 26° (8.0) .315 (6.3) .248 K .248” (6.3mm) Flatted .394” (10.0mm) Flatted E Snap Top for Paddles (2.7) .106 (1.6) .063 26° (2.6) Dia .102 (10.0) .394 .248” (6.3mm) Bat 26° 26° (2.6) Dia .102 H J (2.6) Dia .102 (10.0) .394 L Locking Lever 26° 26° (1.6) .063 (6.3) .248 26° (2.6) .102 (2.5) .098 (12.5) .492 (5.0) .197 (5.9) .232 (4.5) Dia .177 (5.1) Dia .201 (11.5) .453 (5.8) .228 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series B Process Sealed Subminiature Antistatic Toggles PC TERMINALS Use of a support bracket is recommended to increase PCB mounting strength and stability. P B Straight H Straight with Bracket Right Angle with Bracket (10.16) .400 (2.54) Typ .100 (5.08) .200 (5.08) .200 (5.08) .200 (0.6) Typ .024 (0.6) Dia Typ .024 (3.1) Typ .122 V (2.54) Typ .100 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) Dia Typ .024 (0.4) Typ .016 (2.54) Typ .100 (0.6) .024 (0.4) .016 (0.5) Typ .020 (3.1) .122 W Vertical with Bracket Straight Long (0.5) Typ .020 (0.6) Dia Typ .024 (2.54) Typ .100 (0.6) Dia Typ .024 (5.08) .200 (18.9) .744 (2.54) Typ .100 (0.6) .024 (0.4) .016 OPTIONAL CAPS G AT4003 .394” (10.0mm) Bat Lever Cap J AT4064 .248” (6.3mm) Bat Lever Cap 26° (3.0) Dia .118 Material: PVC Colors Available: A, B, C (11.0) .433 26° (3.0) Dia .118 Material: PVC Colors Available: A, B, C (10.0) .394 (7.0) .276 (6.3) .248 PADDLES A AT467 Short Paddle for K Toggle B AT468 Long Paddle for K Toggle 26° (4.6) .181 26° (2.4) .094 Material: Polyamide Colors Available: A, B, C, E, F, G, H (5.0) .197 (15.1) .594 Material: Polyamide Colors Available: A, B, C, E, F, G, H (9.4) .370 (10.3) .406 (4.4) .173 (2.4) .094 (5.0) Dia .197 (14.2) .559 Color Codes: A Black B White C Red E Yellow F Green G Blue H Gray NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Toggles Series B TYPICAL SWITCH DIMENSIONS Straight PC Single Pole (6.0) Dia .236 (0.6) Dia Typ .024 (2.6) Dia .102 26° (8.8) .346 2 3 Slot (3.5) .138 (10.0) .394 (6.8) .268 (0.8) .031 (13.1) .516 (1.0) .039 1 1 2 3 (1.0) .039 (2.54) Typ .100 (3.1) .122 CL (2.54) Typ .100 (0.8) Dia Typ .031 CL B12AP Straight PC Double Pole (2.6) Dia .102 (6.0) Dia .236 (0.6) Dia Typ .024 26° Slot (3.5) .138 (10.0) .394 (8.8) .346 (0.8) .031 (13.1) .516 1 4 2 5 3 6 (8.8) .346 4 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) Typ .100 (3.1) .122 (5.08) .200 B22AP Straight PC • Bracket Single Pole (6.0) Dia .236 (2.6) Dia .102 (0.4) Typ .016 (0.6) Typ .024 1 (10.16) .400 26° Slot (0.6) Dia Typ .024 (6.0) .236 (8.0) .315 (0.8) .031 (13.1) .516 (2.7) .106 (10.0) .394 2 3 (2.54) Typ .100 (3.1) .122 1 (8.8) .346 (1.0) .039 (2.54) .100 CL (1.0) .039 (2.54) Typ .100 2 3 (0.8) Dia Typ .031 (2.54) .100 CL B12AB Straight PC • Bracket Double Pole (2.6) Dia .102 (6.0) Dia .236 (0.4) Typ .016 (6.0) .236 (8.8) .346 (5.08) .200 (10.16) .400 26° Slot (0.6) Dia Typ .024 (2.7) .106 (10.0) .394 (0.8) .031 (13.1) .516 1 4 2 5 3 6 (8.8) .346 4 1 5 2 6 3 (0.6) Typ .024 (5.08) .200 (2.54) Typ .100 (3.1) .122 (2.54) Typ .100 (0.8) Dia Typ .031 B22AB Right Angle PC Single Pole (6.0) Dia .236 (2.6) Dia .102 (3.4) .134 3 Slot (0.6) Typ .024 (5.08) .200 (2.7) .106 (10.0) .394 (0.4) .016 (13.9) .546 (3.1) .122 (5.08) .200 2 (8.8) .346 1 (7.3) .287 (0.6) Dia Typ .024 (2.54) Typ .100 1 2 3 (2.54) Typ .100 (5.08) .200 (0.8) Dia Typ .031 B12AH NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Toggles Series B TYPICAL SWITCH DIMENSIONS Right Angle PC Double Pole (2.6) Dia .102 (6.0) Dia .236 (3.1) .122 Slot (0.6) Typ .024 (5.08) .200 (2.7) .106 (10.0) .394 (8.8) .346 (0.4) .016 (4.4) .173 (2.54) .100 (5.08) .200 (16.4) .646 3 2 1 6 5 4 (8.8) .346 1 2 (2.54) Typ .100 (2.54) 3 .100 4 5 6 (5.08) .200 (0.5) .020 (0.8) Dia Typ .031 (0.6) Dia Typ .024 (2.54) Typ .100 B22AH Vertical PC Single Pole (2.6) Dia .102 (6.0) Dia .236 (1.0) .039 1 26° Slot (0.6) Typ .024 (2.54) .100 (1.0) .039 (2.7) .106 (8.0) .315 1 (0.4) .016 (5.08) .200 (10.0) .394 (4.4) .173 3 (0.5) (3.1) .020 .122 (2.54) Typ .100 (18.9) .746 (8.8) .346 2 (2.54) Typ .100 2 3 (5.08) .200 (0.8) Dia Typ .031 (2.54) CL .100 (0.6) Dia Typ .024 (1.0) .039 CL B12AV Vertical PC Double Pole (6.0) Dia .236 (2.6) Dia .102 26° (2.7) .106 Slot (0.6) Typ .024 (5.08) .200 (1.0) .039 (8.8) .346 (0.4) .016 (5.08) .200 (10.0) .394 (4.4) .173 1 4 2 5 3 6 (0.5) (3.1) .020 .122 (2.54) Typ .100 (18.9) .746 4 (8.8) .346 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (5.08) .200 (0.8) Dia Typ .031 (0.6) Dia Typ .024 (5.08) .200 B22AV Locking Lever • Straight PC • Bracket Single Pole (6.0) .236 (4.5) Dia (5.1) Dia .201 .177 (0.4) Typ .016 (5.8) .228 (11.5) .453 (12.5) .492 (8.0) .315 (0.6) Typ .024 1 (10.16) .400 26° Slot (0.6) Dia Typ .024 (5.5) .217 (0.8) .031 (15.5) .610 2 3 (2.54) Typ .100 (3.1) .122 1 (8.8) .346 (1.0) .039 (2.54) .100 CL (1.0) .039 (2.54) Typ .100 2 3 CL (0.8) Dia Typ .031 (2.54) .100 B12LB Locking Lever • Straight PC • Bracket Double Pole (4.5) Dia (5.1) Dia .201 .177 (6.0) Dia .236 (0.4) Typ .016 (10.16) .400 26° Slot (5.68) .224 (8.85) .348 (0.6) Dia Typ .024 (5.8) .228 (11.5) .453 (12.5) .492 (5.5) .217 (0.8) .031 (15.5) .610 (2.54) Typ .100 (3.1) .122 (5.08) .200 1 4 2 5 3 6 (8.8) .346 (0.6) Typ .024 (5.08) .200 4 1 5 2 6 3 (2.54) Typ .100 (0.8) Dia Typ .031 B22LB NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Subminiature Antistatic Toggles Series B TYPICAL SWITCH DIMENSIONS Threaded Bushing • Straight PC Panel Seal • Single Pole (2.6) Dia .102 (0.6) Dia Typ .024 M6 P0.75 1 26° Slot (4.8) .189 (6.8) .268 (8.8) .346 3 (8.0) .315 (5.5) .217 (0.8) .031 (15.1) .594 (2.54) Typ .100 (3.1) .122 (1.0) .039 1 2 2 3 CL (1.0) .039 (2.54) Typ .100 (0.8) Dia Typ .031 CL B12A1P Threaded Bushing • Straight PC Panel Seal • Double Pole (2.6) Dia .102 (0.6) Dia Typ .024 M6 P0.75 26° Slot (4.8) .189 (8.8) .346 (8.0) .315 (5.5) .217 (0.8) .031 (15.1) .594 (2.54) Typ .100 (3.1) .122 1 4 2 5 3 6 (8.8) .346 4 1 5 2 6 3 (5.08) .200 (2.54) Typ .100 (0.8) Dia Typ .031 (2.54) Typ .100 CL B22A1P STANDARD HARDWARE & PANEL CUTOUT AT513M Metric Hex Nut AT063 Gasket M6 P0.75 (8.0) .315 Material: Brass, Nickel plated (9.0) .354 (1.5) .059 (6.2) (8.6) .244 .339 Material: Nitrile butadiene rubber (6.0) .236 (5.0) .197 (4.9) .193 (6.9) .272 (1.3) .051 Maximum Panel Thickness with Standard Hardware: .087” (2.2mm) NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07