MP 450W/650W/1000W Modular Power series Features : ZVT technology to reduce power dissipation and improve efficiency Various output configuration is selectable Built in active PFC, PF>0.95 Universal AC input/ full range Remote Control on every individual output module Remote Sense on every individual output module(MS-75,150,300) Built in parallel function(MS-300) Protections: Short circuit / Overload / Over voltage for all output modules Additional 12V/0.1A auxiliary output for remote control Cooling by built-in DC fan with fan alarm function 3 years warranty Output Configuration Guide MP - - Single output(MS-150) 1 SLOT (150W max.) SLOT1 SLOT2 SLOT3 SLOT4 SLOT5 SLOT6 SLOT7 450/650/1K0(450W/650W/1000W) Modular Power with PFC 450W/650W(5SLOT) Parallel or option code (See Table 1.) 1000W(7SLOT) Example: MP1K0- A 2 E # S 2 Voltage code A B C D E F G H I J K K SLOT1 O/P:2V@25A SLOT2,3 O/P:12V@25A SLOT4 Blank Slot Voltage 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V Single output(MS-75) 1 SLOT (75W max.) Single output(MS-300) 2 SLOT (300W max.) Voltage code 2A 2B 2C 2D 2E 2F 2G 2H 2I 2J 2K Voltage 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V Voltage code L M N O P Q Voltage 3.3V 5V 12V 15V 24V 48V Dual output(MD-100) 1 SLOT (100W max.) Voltage code R S T U V W SLOT5 O/P:5V@10A [email protected] X Voltage 5V 5V 5V 12V 5V 15V 24V 5V 24V 12V 12V 12V 15V 15V SLOT6,7 O/P:[email protected] SPECIFICATION MODEL PFC-450 VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz PF>0.95/230VAC POWER FACTOR INPUT EFFICIENCY PROTECTION FUNCTION INRUSH CURRENT 25A/115VAC 40A/230VAC <1.5mA/240VAC OVER TEMPERATURE OTHERS 84% typ. 9A/115VAC 4.5A/230VAC 30A/115VAC 50A/230VAC 650W max. 450W max. Thermal switch detect on the heatsink of power MOSFET 13.5A/115VAC 20A/115VAC 6.7A/230VAC 40A/230VAC 1000W max. Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Output shutdown when FAN is malfunction REMOTE CONTROL RC+/RC-: 0 ~ 0.8V or Short, Power ON AUXILIARY POWER(AUX) [email protected](only for Remote ON/OFF Control) -20 ~ +70 (Refer to output load derating curve) VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE (Note 5) 3.2A/230VAC FAN ALARM WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT EMC 84% typ. 6.3A/115VAC WORKING TEMP. SAFETY & PF>0.98/115VAC at full load AC CURRENT TOTAL OUTPUT POWER PFC-1000 120 ~370VDC Note.1 83% typ. LEAKAGE CURRENT OUTPUT PFC-650 RC+/RC-: 4 ~ 12V or Open, Power OFF 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B / 70% RH HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY DIMENSION Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-1, EN61204-3, light industry level, criteria A 254*127*63.5mm (L*W*H) 278*127*63.5mm (L*W*H) 278*177.8*63.5mm (L*W*H) PACKING 1.8Kg(typ.); 6pcs / 11.8Kg / 1.25CUFT 2.16Kg(typ.); 6pcs / 14Kg / 1.34CUFT 3Kg(typ.); 6pcs /19Kg / 1.74CUFT File Name:MP-450,650,1K0-SPEC 2008-08-05 MP 450W/650W/1000W Modular Power series SPECIFICATION 1 SLOT Single output (150W) MS-150 OUTPUT VOLTAGE CODE MS-150A MS-150B MS-150C MS-150D MS-150E MS-150F MS-150G MS-150H MS-150I MS-150J DC VOLTAGE 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V RATED CURRENT 25A 25A 25A 18A 13A 10A 8.5A 6.5A 5.8A 4.7A 3.2A 0 ~ 25A CURRENT RANGE PEAK LOAD OUTPUT (MS-150) Note.4 30A 50W RATED POWER RIPPLE & NOISE (max.) Note.2 50mVp-p MS-150K 0 ~ 25A 0 ~ 25A 0 ~ 18A 0 ~ 13A 0 ~ 10A 0 ~ 8.5A 0 ~ 6.5A 0 ~ 5.8A 0 ~ 4.7A 0 ~ 3.2A 30A 30A 20.7A 15A 11.5A 9.8A 7.5A 6.7A 5.4A 3.68A 156W 150W 153W 156W 156.6W 155.1W 153.6W 82.5W 125W 135W 80mVp-p 80mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p 4 ~ 6V 6 ~ 9V 30 ~ 40V 40 ~ 53V VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.2% LOAD REGULATION 2.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.6 ~ 2.6V 2.6 ~ 4V VOLTAGE ADJ. RANGE 9 ~ 13.2V 13.2 ~ 16.8V 16.8 ~ 20V 20 ~ 26.4V 25 ~ 31V SETUP, RISE, HOLD UP TIME 1500ms, 50ms, 20ms at full load 121 ~ 150% rated output power 116 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVERLOAD PROTECTION 2.7 ~ 4V OVER VOLTAGE FUNCTION REMOTE INHIBIT CONTROL 4.1 ~ 5V 6.1 ~ 7.5V 9.1 ~ 11.2V 13.3 ~ 18V 16.9 ~ 22V 20.1 ~ 26V 26.5 ~ 35V 31.1 ~ 39V 40.1 ~ 48V 53.1 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF 2 SLOT Single output (300W) MS-300 OUTPUT VOLTAGE CODE MS-300-2A MS-300-2B MS-300-2C MS-300-2D MS-300-2E MS-300-2F MS-300-2G MS-300-2H MS-300-2I DC VOLTAGE 2V 3.3V 5V 7.5V 12V 15V 18V 24V 27V 33V 48V RATED CURRENT 50A 50A 50A 40A 25A 20A 16.7A 12.5A 11.2A 9.1A 6.3A 0 ~ 50A CURRENT RANGE PEAK LOAD OUTPUT (MS-300) Note.4 57.5A 100W RATED POWER RIPPLE & NOISE (max.) Note.2 80mVp-p 0 ~ 50A 0 ~ 40A 0 ~ 25A 0 ~ 20A 0 ~ 16.7A 0 ~ 12.5A 0 ~ 11.2A 0 ~ 9.1A 0 ~ 6.3A 57.5A 46A 29A 23A 19.2A 14.4A 12.9A 10.5A 7.2A 300W 300W 300.6W 300W 302.4W 300.3W 302.4W 165W 250W 300W 80mVp-p 80mVp-p 100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 300mVp-p 4 ~ 6V 6 ~ 9V 30 ~ 40V 40 ~ 53V 3.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.2% LOAD REGULATION 2.0% 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 1.0% 1.0% 1.0% 1.0% 1.6 ~ 2.6V 2.6 ~ 4V 9 ~ 13.2V 13.2 ~ 16.8V 16.8 ~ 20V 20 ~ 26.4V 25 ~ 31V SETUP, RISE, HOLD UP TIME 1500ms, 50ms, 20ms at full load 116 ~ 150% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3 ~ 4V OVER VOLTAGE FUNCTION 0 ~ 50A 57.5A VOLTAGE TOLERANCE Note.3 VOLTAGE ADJ. RANGE PROTECTION MS-300-2J MS-300-2K 4.1 ~ 5V 6.1 ~ 7.5V 9.1 ~ 11.2V 13.3 ~ 18V 16.9 ~ 22V 20.1 ~ 26V 26.5 ~ 35V 31.1 ~ 39V 40.1 ~ 48V 53.1 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover REMOTE INHIBIT CONTROL RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF 1 SLOT Single output (75W) MS-75 OUTPUT VOLTAGE CODE MS-75L MS-75M MS-75N MS-75O MS-75P MS-75Q DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 15A 15A 6.3A 5A 3.2A 1.6A CURRENT RANGE 0 ~ 15A 0 ~ 15A 0 ~ 6.3A 0 ~ 5A 0 ~ 3.2A 0 ~ 1.6A 1.8A PEAK LOAD OUTPUT (MS-75) Note.4 17.3A RATED POWER 49.5W RIPPLE & NOISE (max.) Note.2 80mVp-p 17.3A 7.3A 5.8A 3.7A 75W 75.6W 75W 76.8W 76.8W 80mVp-p 150mVp-p 150mVp-p 150mVp-p 250mVp-p 9 ~ 13.2V 13.2 ~ 16.8V 20 ~ 26.4V 40 ~ 53V 2.6 ~ 4V 4 ~ 6V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% VOLTAGE ADJ. RANGE SETUP, RISE, HOLD UP TIME 1500ms, 50ms, 20ms at full load OVERLOAD PROTECTION OVER VOLTAGE FUNCTION REMOTE INHIBIT CONTROL 116 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 4.1 ~ 5V 6.1 ~ 7.5V 13.3 ~ 18V 16.9 ~ 22V 26.5 ~ 35V 53.1 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF File Name:MP-450,650,1K0-SPEC 2008-08-05 MP 450W/650W/1000W Modular Power series SPECIFICATION 1 SLOT Isolated Dual output (100W) MD-100 OUTPUT (MD-100) OUTPUT VOLTAGE CODE MD-100R MD-100S MD-100T MD-100U MD-100V MD-100W MD-100X DC VOLTAGE 5V 5V 5V 12V 5V 15V 24V 5V 24V 12V 12V 12V 15V RATED CURRENT 10A 8A 10A 4.2A 10A 3.4A 2.5A 8A 2.5A 3.4A 5A 3.4A 4A CURRENT RANGE 2 ~ 10A 0 ~ 8A 2.7A 2 ~ 10A 0 ~ 5.8A 2 ~ 10A 0 ~ 4.7A 0.5 ~ 3A 0 ~ 10A 0.6 ~ 3A 0 ~ 4.7A 1 ~ 5A 0 ~ 5.8A 1 ~ 4.7A 0 ~ 4.7A RATED POWER Note.6 90W 100.8W 100.8W 100.4W 101W 100W 100.5W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 150mVp-p 100mVp-p 150mVp-p 200mVp-p 100mVp-p 240mVp-p 120mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 4.75 ~ 5.5V 4.75 ~ 5.5V 11.4 ~ 13.2V 4.75 ~ 5.5V 14.2 ~ 16.5V 22.8 ~ 26.4V 4.75 ~ 5.5V 22.8 ~ 26.4V 11.4 ~ 13.2V 11.4~ 13.2V 11.4~ 13.2V 14.2 ~ 16.5V 14.2 ~ 16.5V VOLTAGE TOLERANCE Note.3 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 3.0% 2.0% 3.0% 2.0% 3.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 0.5% 1.0% 0.5% 1.0% 0.5% LOAD REGULATION 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 2.0% 1.0% 2.0% 1.0% SETUP, RISE, HOLD UP TIME 1500ms, 50ms, 20ms at full load 105 ~ 150% rated output power Protection type : Shut down o/p voltage, re-power on to recover OVERLOAD PROTECTION OVER VOLTAGE FUNCTION 15V REMOTE INHIBIT CONTROL 5.6 ~ 7.2V 5.6 ~ 7.2V 5.6 ~ 7.2V 13.3 ~ 17V 5.6 ~ 7.2V 16.6 ~ 22V 26.5 ~ 34V 5.6 ~ 7.2V 26.5 ~ 34V 13.3 ~ 17V 13.3 ~ 17V 13.3 ~ 17V 16.6 ~ 22V 16.6 ~ 22V Protection type : Shut down o/p voltage, re-power on to recover RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF 1. MP450:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules. 5V(Voltage code C)*1, 12V(Voltage code E)*1, 24V(Voltage code H)*1, 5V(Voltage code M)*1. MP650:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules. 5V(Voltage code C)*2, 12V(Voltage code E)*1, 24V(Voltage code H)*2. MP1K0:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules. 5V(Voltage code C)*2, 12V(Voltage code E)*2, 24V(Voltage code H)*3. The hold-up time of above combination is 20ms(typ.) 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 35% Duty cycle maximum within every 10 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. If the output voltage adjust to higher level, the rated current should be derated to meet the total rated power for both outputs(For MD-100 only). NOTE Table 1. Parellel code(For MS-300 only) Code SLOT1 SLOT2 SLOT3 SLOT4 SLOT5 SLOT6 SLOT7 X ----- ----- 1 ----- ----- 2 ----- ----- 3 4 5 6 Code X,1,2 for MP450,MP650 Code X,1,2,3,4,5,6 for MP1K0 File Name:MP-450,650,1K0-SPEC 2008-08-05 MP 450W/650W/1000W Modular Power Mechanical Specification series Unit:mm MP450 12 max. 254 19 147.5 19 16 max. 38 63.5 12.5 147.5 1 2 3 12.25 8-M4(Both Sides) CN4 4-M4 3 2 101.5 127 Air flow direction 1 TB1 10 8.2 MP650 12 max. 278 19 16 max. 171.5 19 38 63.5 12.5 171.5 12.25 8-M4(Both Sides) CN4 1 2 3 Air flow direction 3 2 101.5 127 4-M4 1 TB1 10 8.2 File Name:MP-450,650,1K0-SPEC 2008-08-05 MP 450W/650W/1000W Modular Power series Mechanical Specification MP1K0 12 max. 278 19 16 max. 171.5 19 38 63.5 12.5 171.5 15.65 8-M4(Both Sides) CN4 1 2 3 3 2 152.4 Air flow direction 177.8 4-M4 1 TB1 10 8.2 TB1(PFC-450/650/1K0) Pin No. 1 2 3 Assignment AC/L AC/N FG CN4(PFC-450/650/1K0) : JST B3B-XH or equivalent Assignment Pin No. 1 +RC: +Remote ON/OFF 2 -RC: -Remote ON/OFF 3 VCC: 12V/0.1A auxiliary output Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent Mechanism of Output Modules Unit:mm MS-75 138 16 max. 21 max. 60 CN51 4 1 3 max. Output Connector( CN51) : JST B4B-XH or equivalent Pin No. 1 2 3 4 -V +V SVR1 Assignment +S: +Remote sensing -S: -Remote sensing +RC: +Remote ON/OFF -RC: -Remote ON/OFF Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent MS-150 138 21 max. 16 max. 60 CN20 4 1 Output Connector( CN20) : JST B4B-XH or equivalent -V +V SVR2 3 max. Pin No. 1 2 3 4 Assignment +S: +Remote sensing -S: -Remote sensing +RC: +Remote ON/OFF -RC: -Remote ON/OFF Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent File Name:MP-450,650,1K0-SPEC 2008-08-05 MP 450W/650W/1000W Modular Power series Mechanism of Output Modules MS-300 138 42 max. 16 max. 3 max. -V 60 -V +V 1 +V 6 CN33 SVR3 Output Connector(CN33) : JST B6B-XH or equivalent Pin No. 1 2 3 4 5 6 Assignment +S: +Remote sensing -S: -Remote sensing +RC: +Remote ON/OFF -RC: -Remote ON/OFF P:Current sharing G:GND Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent NOTE: 1.The voltage difference among each output should be minimized that less than 2% is required. 2.The total output current must not exceed the value determined by the following equation. (Output current at parallel operation) = (The rated current per unit) (Number of unit) 0.9 MD-100 138 21 max. 16 max. 3 max. GND2 60 +V2 CN41 GND1 +V1 2 1 SVR4 SVR5 Output Connector(CN41) : JST B2B-ZR or equivalent Pin No. 1 2 Assignment +RC -RC Mating Housing JST ZHR-2 or equivalent Terminal JST SZH-002T-P0.5 or equivalent NOTE: 1.Remote ON/OFF of CN4 turn ON/OFF the entire power system 2.Remote ON/OFF of CN20,CN33,CN41,CN51 turn ON/OFF the individual output module 3.SVR1~5: DC output voltage adjustment(SVR4 for CH2 of MD-100,SVR5 for CH1 of MD-100) Derating Curve Static Characteristics Ta=25 80 RATED POWER (%) RATED POWER (%) 100 60 50 40 20 -20 100 90 85 80 70 80 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 85 90 100 120 140 160 180 200 220 240 264 INPUT VOLTAGE (V) 60Hz File Name:MP-450,650,1K0-SPEC 2008-08-05