HMC-T2220 Synthesized Signal Generator, 10 MHz to 20 GHz 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at [email protected] HMC-T2220 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 20 GHz v00.1210 Wide Frequency Range, 10 MHz to 20 GHz Signal Generator! 9 The HMC-T2220 is an easy to implement test equipment solution designed to fulfill your signal generation needs. Built on a foundation of high quality and market leading Hittite MMICs, the HMC-T2220 provides the highest output power, lowest harmonic levels and broadest frequency range amongst signal generators of its size and cost. This compact and lightweight signal generator also features USB, GPIB and Ethernet interfaces ensuring carefree integration within various test environments while improving overall productivity and equipment utilization. Applications ATE Test & Measurement R&D Laboratories Synthesized Signal Generator Advantages 9-2 Versatile: Higher Drive Simplifies Test Set-Ups Efficient: 300 µs Frequency Switching Reliable: Incorporates Hittite MMICs Flexible: Manual or Software Control Via USB, GPIB or Ethernet Performance High Output Power: +28 dBm @ 1 GHz Wide Frequency Range: 10 MHz to 20 GHz Excellent Phase Noise Performance: -98 dBc/Hz @ 10 kHz Offset @ 10 GHz Spurious Rejection: -75 dBc @ 10 GHz Power Resolution: 0.1 dB Frequency Resolution: 1 Hz 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at [email protected] HMC-T2220 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 20 GHz Frequency v00.1210 Max Output Power @ 25°C 35 Accuracy: As Per Internal Ref. ±1.5 ppm Resolution: 1 Hz Internal Reference: 10 MHz Aging Rate: <1 ppm/yr External Reference Input: 10 MHz (Sine) Internal Reference Output: 10 MHz (Square Wave) OUTPUT POWER (dBm) (Maximum) 25 20 15 10 5 0 Power Output (dBm) 0 2 4 6 8 10 12 14 16 18 20 FREQUENCY (GHz) 24 28 28 28 28 27 27 27 27 24 SSB Phase Noise vs. Frequency -40 Minimum Settable: -35 dBm Dynamic Range: >60 dB Resolution: 0.1 dB Power Accuracy: ±1 dB > -20 dBm ±2 dB < -20 dBm 10 MHz 50 MHz 100 MHz 1 GHz -60 5 GHz 10 GHz 15 GHz 20 GHz -80 -100 -120 -140 -160 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 8 OFFSET FREQUENCY (Hz) Spurious @ 10 dBm Output < -60 dBc @ Integer Frequencies < -65 dBc @ Fractional Frequencies <10 GHz < -57 dBc @ Fractional Frequencies >10 GHz Harmonics Frequency (GHz) 0.01 0.05 0.1 0.5 1 2 5 10 15 20 SSB Phase Noise (dBc/Hz) 2nd Harmonics (dBc) -34 -30 -31 -34 -33 -43 -32 -34 -39 -55 3rd Harmonics (dBc) -44 -42 -46 -55 -52 -57 -54 -58 -48 - Spurious (dBc) -65 -70 -65 -65 -65 -75 -75 -75 -75 -75 Offset From Carrier Frequency (GHz) 10 Hz 100 Hz 1 kHz 0.01 0.05 0.10 0.50 1 5 10 15 20 -87 -86.4 -86 -82 -77 -64 -58 -56 -51 -97 -96.2 -97 -95 -89 -75 -69 -66 -63 -106 -106 -107 -119 -113 -99 -92 -89 -86 10 kHz 100 kHz 1 MHz 10 MHz -113 -112 -114 -125 -119 -105 -98 -95 -92 -107 -108 -108 -125 -119 -105 -99 -94 -93 -126 -128 -129 -139 -135 -124 -118 -111 -112 Output Noise: Floor < -155 dBc/Hz Output Power = +10 dBm -140 -140 -143 -143 -144 -145 -143 -134 -137 Synthesized Signal Generator Frequency (GHz) 0.01 0.05 0.1 0.5 1 2 4 10 15 20 SSB PHASE NOISE (dBc/Hz) Output Power 9 30 Above data is typical performance at +25°C after 30 minutes of warm-up time unless otherwise stated. 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at [email protected] 9-3 HMC-T2220 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 20 GHz v00.1210 General Specifications 9 Mechanical Vibration & Shock: Power - AC: 100 to 240 VAC @ 50 to 60 Hz Calibration: 1 Year Environment (for indoor use only): 0 to 35 °C Cooling: 2 Internal Fans Input / Output: 10 MHz REFOUT [1] 10 MHz REFIN [2] TRIGGER IN [3]: TTL TRIGGER OUT [3]: TTL RS-232 (used for field upgrades) Ethernet GPIB USB 1.1/2.0 RF Output SMA Female MIL-STD 810 Table 415.5 C-VII MIL-STD 202 MTD 214 1.5G Compliance: CSA & CE General Mechanical Characteristics H: 76.2 mm (3 in) W: 203 mm (8 in) D: 305 mm (12 in) Weight 2.6 kg (5.74 lbs) Warranty: 1 Year Parts and Labor [1] +10 dBm typ. into 50 Ohms; BNC Connector [2] -5 dBm min. 50 Ohms; BNC Connector [3] The trigger input can be driven from either 3.3V or 5V sources for direct interface with TTL signal levels; BNC Connector Synthesized Signal Generator Two Tone Third Order Intercept Test Set-up HMC-T2220 I/O CONTROL HMC-T2220 Spectrum Analyzer RFIN HMC-T2220 RF LO DUT IF Device Under Test • Amplifiers • Mixers & Converters • Modulators • RFICs & Subsystems Efficient Mixer Conversion Loss, Isolation & MxN Spurious Test Set-up HMC-T2220 Device Under Test • Single or Double-Balanced Mixers • Up/Down Converters • I/Q Mixers LO DUT I/O CONTROL IF HMC-T2220 RF Spectrum Analyzer RFIN 9-4 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at [email protected] HMC-T2220 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 20 GHz v00.1210 HMC-T2220 Rear Panel I/O Connections 9 Its compact size, light weight, fast switching speed and USB, GBIP and Ethernet control interfaces support the standard SCPI command set ensuring smooth integration within all test environments, particularly those associated with automated test. An installation disk that accompanies each unit includes all the drivers required to remotely control the device as well as a user friendly GUI interface (right) compatible with a Windows XP ®, Windows Vista® or Windows 7® operating system. User control is facilitated via pull down menus that allow programming of single or swept modes in frequency or power. Integration of multiple units within a production test environment is easy, and affordable. Remote Interface Hardware: USB (Windows XP®, Windows 7®, Windows Vista® Drivers Supplied), GPIB or Ethernet Software: LabVIEW 2009 Driver Frequency Switching Speed: 300 us Typ. Local Interface Front Panel Rotary Knob & Display HMC-T2100 Compatibility To facilitate integration into existing HMC-T2100 applications, the HMC-T2220 has a HMC-T2100 compatibility mode. In this mode, the HMC-T2220 identifies itself as a HMC-T2100 so that the HMC-T2100 USB drivers will work for a HMC-T2220, and programs which use the *IDN? string will recognize a HMC-T2220 as a HMC-T2100. Frequency resolution, maximum and minimum values for power, and minimum sweep dwell time also change to match the HMC-T2100. Synthesized Signal Generator Connectivity & Control Windows ® - Windows XP ® , Windows Vista ® and Windows 7 ® are registered trademarks of Microsoft Corporation. 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at [email protected] 9-5 HMC-T2220 SYNTHESIZED SIGNAL GENERATOR, 10 MHz to 20 GHz v00.1210 HMC-T2220 9 Ordering Information Test Rack Mount Kit Model Number Description HMC-T2220 Synthesized Signal Generator 10 MHz to 20 GHz Price $9,998.00 Part Number Description Price HMC-RM02 Dual Rack Mounting Plate 19” 2u Chassis $385.00 Synthesized Signal Generator Includes 100 - 240V AC Power Supply and one Power Cord at no cost. Please specify your preferred power cord part number at time of ordering. (see “Optional Power Cord” table) Power Cord Part Number Region HMC-PC01 Continental Europe HMC-PC02 United Kingdom HMC-PC03 China HMC-PC04 Australia, New Zealand HMC-PC05 North America HMC-PC06 South Africa / India HMC-PC07 Switzerland HMC-PC08 Denmark HMC-PC09 Israel HMC-PC10 Italy HMC-PC11 Japan All pricing is in U.S. Dollars and is subject to change without notice. 9-6 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com Instrumentation Product Support at [email protected]