DXT2222A NPN SURFACE MOUNT TRANSISTOR NEW PRODUCT Features • • • • • • Epitaxial Planar Die Construction Complementary PNP Type Available (DXT2907A) Ideally Suited for Automated Assembly Processes Ideal for Medium Power Switching or Amplification Applications Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) SOT89-3L Mechanical Data • • • • • • • Case: SOT89-3L Case Material: Molded Plastic, "Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish — Matte Tin annealed over Copper leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Marking & Type Code Information: See Page 4 Ordering Information: See Page 4 Weight: 0.072 grams (approximate) Maximum Ratings COLLECTOR 2,4 3 E C 4 2 C 1 BASE 1 B 3 EMITTER TOP VIEW Schematic and Pin Configuration @TA = 25°C unless otherwise specified Symbol Value Unit Collector-Base Voltage Characteristic VCBO 75 V Collector-Emitter Voltage VCEO 40 V VEBO 6 V ICM 800 mA IC 600 mA Value Unit Emitter-Base Voltage Peak Pulse Current Continuous Collector Current Thermal Characteristics Characteristic Symbol Power Dissipation (Note 3) @ TA = 25°C Thermal Resistance, Junction to Ambient Air (Note 3) @TA = 25°C Operating and Storage Temperature Range Notes: PD 1 W RθJA 125 °C/W Tj, TSTG -55 to +150 °C 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB; pad layout as shown on page 4 or in Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS31156 Rev. 3 - 2 1 of 4 www.diodes.com DXT2222A © Diodes Incorporated Electrical Characteristics Symbol Min Max Unit V(BR)CBO V(BR)CEO V(BR)EBO 75 40 6.0 ⎯ ⎯ ⎯ Collector Cutoff Current ICBO ⎯ 10 Collector Cutoff Current Emitter Cutoff Current Base Cutoff Current ON CHARACTERISTICS (Note 4) ICEX IEBO IBL ⎯ ⎯ ⎯ 10 10 20 V V V nA μA nA nA nA hFE 35 50 75 100 40 35 50 ⎯ ⎯ ⎯ 300 ⎯ ⎯ ⎯ ⎯ 0.3 1.0 V 1.2 2.0 V DC Current Gain Collector-Emitter Saturation Voltage VCE(SAT) Base-Emitter Saturation Voltage VBE(SAT) ⎯ ⎯ 0.6 ⎯ Cobo Cibo fT ⎯ ⎯ 300 8 25 ⎯ pF pF MHz NF ⎯ 4.0 dB td tr ts tf ⎯ ⎯ ⎯ ⎯ 10 25 225 60 ns ns ns ns SMALL SIGNAL CHARACTERISTICS Output Capacitance Input Capacitance Current Gain-Bandwidth Product Noise Figure SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time Notes: 4. Test Conditions IC = 10μA, IE = 0 IC = 10mA, IB = 0 IE = 10μA, IC = 0 VCB = 60V, IE = 0 VCB = 60V, IE = 0, TA = 150°C VCE = 60V, VEB(OFF) = 3.0V VEB = 3.0V, IC = 0 VCE = 60V, VEB(OFF) = 3.0V IC = 100μA, VCE = 10V IC = 1.0mA, VCE = 10V IC = 10mA, VCE = 10V IC = 150mA, VCE = 10V IC = 500mA, VCE = 10V IC = 10mA, VCE = 10V, TA = -55°C IC = 150mA, VCE = 1.0V IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA IC = 150mA, IB = 15mA IC = 500mA, IB = 50mA VCB = 10V, f = 1.0MHz, IE = 0 VEB = 0.5V, f = 1.0MHz, IC = 0 VCE = 20V, IC = 20mA, f = 100MHz VCE = 10V, IC = 150μA, RS = 1.0kΩ, f = 1.0kHz VCC = 30V, IC = 150mA, VEB(off) = 0.5V, IB1 = 15mA VCC = 30V, IC = 150mA, IB1 = IB2 = 15mA Measured under pulsed conditions. Pulse width = 300μs. Duty cycle ≤2%. IC, COLLECTOR CURRENT (A) NEW PRODUCT Characteristic OFF CHARACTERISTICS (Note 4) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage @TA = 25°C unless otherwise specified RθJA = 125°C/W VCE, COLLECTOR EMITTER VOLTAGE (V) DS31156 Rev. 3 - 2 2 of 4 www.diodes.com DXT2222A © Diodes Incorporated VCE(SAT), COLLECTOR EMITTER SATURATION VOLTAGE (V) NEW PRODUCT IC, COLLECTOR CURRENT (mA) CAPACITANCE (pF) IC, COLLECTOR CURRENT (mA) VBE(SAT), BASE EMITTER SATURATION VOLTAGE (V) VBE(ON), BASE EMITTER TURN-ON VOLTAGE (V) IC, COLLECTOR CURRENT (mA) VCE = 20V f = 100MHz VR, REVERSE VOLTAGE (V) DS31156 Rev. 3 - 2 Fig. 8 Typical Gain-Bandwidth Product vs. Collector Current 3 of 4 www.diodes.com DXT2222A © Diodes Incorporated Ordering Information (Note 5) Device DXT2222A-13 Notes: 5. Packaging SOT89-3L Shipping 2500/Tape & Reel For packaging details, go to our website at http://www.diodes.com/ap02007.pdf. Marking Information NEW PRODUCT (Top View) YWW K1P = Manufacturer’s code marking K1P = Product Type Marking Code YWW = Date Code Marking Y = Last digit of year ex: 7 = 2007 WW = Week code 01 - 52 Package Outline Dimensions 0 20 0. R D1 SOT89-3L C Dim E H L B B1 8° e (4X ) A Min Max Typ A 1.40 1.60 1.50 B 0.45 0.55 0.50 B1 0.37 0.47 0.42 C 0.35 0.43 0.38 D 4.40 4.60 4.50 D1 1.50 1.70 1.60 E 2.40 2.60 2.50 e — — 1.50 H 3.95 4.25 4.10 L 0.90 1.20 1.05 All Dimensions in mm D Suggested Pad Layout 1.7 2.7 0.4 1.9 1.3 0.9 3.0 Unit: mm IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS31156 Rev. 3 - 2 4 of 4 www.diodes.com DXT2222A © Diodes Incorporated