J151 RoHS Compliant E197852 21.6, 30.6, 40.6 x 27.6 x 35.0 mm Features t • • • Switching capacity up to 20A; small size and light weight Low coil power consumption; high contact load Strong resistance to shock and vibration Contact Data* Contact 1A, 1B, 1C = SPST N.O., SPST N.C., SPDT Contact Resistance < 50 milliohms initial Arrangement 2A, 2B, 2C = DPST N.O., DPST N.C., DPDT Contact Material AgCdO 3A, 3B, 3C = 3PST N.O., 3PST N.C., 3PDT Maximum Switching Power 5540VA, 560W 4A, 4B, 4C = 4PST N.O., 4PST N.C., 4PDT Maximum Switching Voltage 300VAC 1 Pole : 20A @ 277VAC & 28VDC, General Purpose Maximum Switching Current 20A Contact Rating 2 Pole : 12A @ 250VAC & 28VDC, General Purpose 2 Pole : 10A @ 277VAC, General Purpose; 1/2hp @ 125VAC 3 & 4 Pole : 12A @ 250VAC & 28VDC, General Purpose 3 & 4 Pole : 10A @ 277VAC, General Purpose; 1/2hp @ 125VAC Coil Data DC Parameters* Coil Voltage VDC Coil Resistance Ω +/- 10% Rated Max .9W 1.4W 1.5W Pick Up Voltage VDC (max) 75% of rated voltage Release Voltage VDC (min) 10% of rated voltage 12 15.6 160 100 96 9.00 1.2 24 31.2 650 400 360 18.00 2.4 36 46.8 1500 900 865 27.00 3.6 48 62.4 2600 1600 1540 36.00 4.8 110 143.0 11000 8400 6800 82.50 11.0 220 286.0 53778 34571 32267 165.00 22.0 Coil Power W Operate Time ms Release Time ms .90 1.40 25 25 Coil Power W Operate Time ms Release Time ms 1.20 2.00 2.50 25 25 Coil Data AC Parameters* Coil Voltage VAC Coil Resistance Ω +/- 10% Rated Max 1.2VA 2.0VA 2.5VA Pick Up Voltage VAC (max) 80% of rated voltage 12 15.6 46 25.5 20 9.60 24 31.2 184 102 80 19.20 7.2 36 46.8 370 230 180 28.8 10.8 48 62.4 735 410 320 38.4 14.4 110 143.0 3900 2300 1680 88.00 33.0 120 156.0 4550 2530 1990 96.00 36.0 220 286.0 14400 8600 3700 176.00 66.0 240 312.0 19000 10555 8280 192.00 72.0 www.citrelay.com Release Voltage VAC (min) 30% of rated voltage 3.6 phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J151 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 20M cycles (1 & 2 pole), typical; 10M cycles (3 &4 pole), average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 1500V rms min. @ sea level initial Contact to Contact 1500V rms min. @ sea level initial 100m/s2 for 11 ms Shock Resistance Vibration Resistance 1.27mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 10N -40oC to +85oC Operating Temperature Solderability -40oC to +155oC 260oC for 5 s Weight 2C: 40g; 3C: 50g; 4C: 60g Storage Temperature * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. Ordering Information 1. Series J151 2C T 12VDC .9 J151 2. Contact Arrangement 1A, 1B, 1C 2A, 2B, 2C 3A, 3B, 3C contact factory for availability 4A, 4B, 4C contact factory for availability 3. Termination T = Solder lugs / Plug-in F = Solder lugs / Plug-in with Flange P = PCB Terminals 4. Coil Voltage 12VDC 24VDC 36VDC 48VDC 110VDC 220VDC 12VAC 24VAC 36VAC 48VAC 110VAC 120VAC 220VAC 240VAC 5. Coil Power .9 = .9W (DC coil for use with 1 and 2 pole models only) 1.4 = 1.4W (DC coil for use with 3 pole models only) 1.5 = 1.5W (DC coil for use with 4 pole models only) 1.2 = 1.2VA (AC coil for use with 1 and 2 pole models only) 2.0 = 2.0VA (AC coil for use iwth 3 pole models only) 2.5 = 2.5VA (AC coil for use with 4 pole models only) 6. Option LED Blank = No indicator LED D = With indicator LED 7. Gold Option Blank = Standard contact G = Gold over standard contacts 8. Push to Test Option Blank = Without push to test button T = With push to test button page 2 www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice. J151 Dimensions Units = mm 1 & 2 Pole 1 & 2 Pole with Flange 3 Pole 3 Pole with Flange 4 Pole 4 Pole with Flange Flange Mount Layouts www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 3 Specifications and availability subject to change without notice. J151 Termination Options PC Pins Solder Tabs Schematics & PC Layouts page 4 1C 2C 3C 4C www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice.