GF2A - GF2M SURFACE MOUNT SINTERED GLASS PASSIVATED RECTIFIER DIODE VOLTAGE RANGE: 50 - 1000V CURRENT: 2.0 A Features ! ! ! Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Ideally Suited for Automated Assembly B Mechanical Data ! Case: SMB(DO-214AA)Molded Plastic ! Case Material - UL Flammability Rating ! ! SMB(DO-214AA) A Classification 94V-0 Terminals: Solder Plated Terminal Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Weight: 0.093 grams (approx.) Dim Min Max A 3.30 3.94 B 4.06 4.70 C 1.91 2.21 D 0.15 0.31 E 5.00 5.59 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 C D J G E H Maximum Ratings and Electrical Characteristics All Dimensions in mm @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 100°C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 2.0A @TA = 25°C @TA = 125°C Typical Total Capacitance (Note 1) Typical Thermal Resistance, Junction to Terminal (Note 2) Operating and Storage Temperature Range Notes: Symbol GF2A VRRM VRWM VR VR(RMS) GF2G GF2J GF2K GF2M Unit 200 400 600 800 1000 V 140 280 420 560 700 V GF2B GF2D 50 100 35 70 I(AV) 2.0 A IFSM 60 A VFM 1.1 V IRM 5.0 200 µA CT 30 pF RJT 16 °C/W Tj, TSTG -65 to +150 °C 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to Terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 1 of 2 www.sunmate.tw RATINGS AND CHARACTERISTIC CURVES GF2A THRU GF2M PEAK FORWARD SURGE CURRENT, AMPERES 60 AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.4 2.0 1.6 1.2 0.8 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.3×0.3"(8.0×8.0mm) COPPER PAD AREAS 0 0 20 40 60 80 100 120 140 50 40 30 20 10 0 1.0 160 LEAD TEMPERATURE, ¢J 10 TJ = 125 ¢J T J = 75 ¢J TJ = 25 ¢J 0.01 0.001 0 20 40 60 80 100 4.0 6.0 10 20 40 60 100 120 Fig. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1,00 0.1 2.0 NUMBER OF CYCLES AT 60hz Fig. 1-FORWARD CURRENT DERATING CURVE 1 TA = 55 ¢J SINGLE SINE-WAVE (JEDEC METHOD) 140 PERCENT OF PEAK REVERSE VOLTAGE, % 100 50 20 10 5.0 2.0 1.0 0.5 0.2 0.1 .05 .02 .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1000 500 200 100 UNITS MOUNTED ON 20in 2 (5.4mm2) + 0.5mil in (0.013mm) THICK COPPER LAND AREAS 50 20 10 5 2 1 0.01 0.1 1 Fig. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS JUNCTION CAPACITANCE, pF THERMAL IMPEDANCE(¢J/W) Fig. 3-TYPICAL REVERSE CHARACTERISTICS 10 100 100 70 10 1 0.1 1 10 100 REVERSE VOLTAGE, VOLTS REVERSE VOLTAGE, VOLTS Fig. 5-TRANSIENT THERMAL IMPEDANCE Fig. 6-TYPICAL JUNCTION CAPACITANCE 2 of 2 www.sunmate.tw