DC11 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole C14 C18 70° C 70° C Approvals and Compliances Description - Panel Mount : Screw-on version from front or rear side, snap-in version from front side - Appliance Inlet protection class I or II , Line Switch 1‑ or 2‑pole - V-Lock notch standard - Quick connect terminals 4.8 x 0.8 mm Unique Selling Proposition - Ultra compact design Line switch for high inrush currents Components internally wired V-Lock cord retaining Characteristics - All single elements are already wired Unwired versions available on request Line switch non-illuminated or illuminated Ideal for application with high transient loads Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Unwired versions - Solder terminals - Line switch with other rocker marking References Alternative: version with line filter DC12 Substitute for type KEB1; KEB2; 6010-K Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 1) 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 50/60 Hz ¹⁾ > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C appliance inlet/-outlet Line Switch C14 / C18 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Rocker switch 1 or 2 pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Standard version 12 A / special version 15A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 DC11 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40007009 UL Approvals UL UL File Number: E96454 CQC Approvals CQC CCC File Number: 2013010204594013 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors DC11 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 27.3 R 2.5 32.3 2.2 R 3.8 34 1) 9.65 31.3 31.15 R6 3.2 6.3x90° R4 9.8 1.35 36 17.9 4.2 27 44 R 2.4 ±0.10 31.6 ±0.10 3.6/M3 2) 27.6 ±0.10 36 ±0.10 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Snap-in mounting 32.3 2.2 R 3.8 31.15 R 2.5 1) 30 1.35 9.65 34 27.3 31.3 R4 9.8 17.9 4.2 S 27 ±0.1 31.6 ±0.10 R 2.4 ±0.10 2) 27.6 ±0.10 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Connectors 3 DC11 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams Line switch non-illuminated 2-pole 1) 2 L 2) PE' PE 1 N 1) Line 2) Load Line switch illuminated 2-pole 1) L Line switch non-illuminated 1-pole 2 PE 2) PE' N 1 1) Line 2) Load 1) 2 L 2) PE' PE 1 N 1) Line 2) Load All Variants Rated Current UL Protection Class Panel mounting Panel Thickness s [mm] Line Switch Illumination Color Order Number 12 I Snap-in 1.5 2-pole l red DC11.0021.201 15 I Snap-in 1.5 2-pole l red DC11.0021.206 12 I Snap-in 2 2-pole l red DC11.0021.301 12 I Snap-in 2.5 2-pole l red DC11.0021.401 12 I Snap-in 1.5 2-pole l green DC11.0031.201 12 I Snap-in 2 2-pole l green DC11.0031.301 l green DC11.0031.401 - DC11.0001.203 12 I Snap-in 2.5 2-pole 12 I Snap-in 1.5 1-pole 15 I Snap-in 1.5 1-pole - DC11.0001.207 12 I Snap-in 2 1-pole - DC11.0001.303 12 I Snap-in 2.5 1-pole - DC11.0001.403 12 I Snap-in 1.5 2-pole - DC11.0001.201 15 I Snap-in 1.5 2-pole - DC11.0001.206 12 I Snap-in 2 2-pole - DC11.0001.301 12 II Snap-in 2 2-pole - DC11.0001.351 15 I Snap-in 2.5 2-pole - 3-107-445 12 I Snap-in 2.5 2-pole - DC11.0001.401 █ █ █ 12 I Snap-in 3 2-pole I Screw - 2-pole l 15 I Screw - 2-pole l red DC11.0021.006 12 I Screw - 2-pole l green DC11.0031.001 █ 12 I Screw - 1-pole - DC11.0001.003 █ 15 I Screw - 1-pole - DC11.0001.007 12 I Screw - 2-pole - DC11.0001.001 15 I Screw - 2-pole - DC11.0001.006 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER With screw mounting on PCB, 2 screws are included All variants according VDE (ENEC 10) approved for 10 A Packaging unit 4 50 Pcs Connectors DC11.0001.501 DC11.0021.001 █ 12 █ Most Popular. red █ █ █ DC11 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to DC11 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to DC11 ... Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Power Supply Cord further types to DC11 Connectors 5 DC11 Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS 07.12.2017 Power Cord further types to DC11 6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.