GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC15005/W THRU GBPC1510/W VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Ampere GBPC35 GBPC35W FEATURES • • • • • • • Plastic package has UL flammability classification 94V-0 Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation High forward surge capacity Glass passivated chip junction High isolation voltage from case to lugs High temperature soldering guaranteed: 260℃/10 seconds, A vailable in either lug package (GBPC5005) or wire lead package (GBPC15005W) 1.135(28.8) • • • 1.115(28.3) 0.72(17.1) .470(11.0) .632(16.1) .430(10.9) AC AC + 1.135(28.8) .672(17.1) .582(14.8) 1.115(28.3) .632(16.1) .542(13.8) + 1.135(28.8) .732(18.6) 1.115(28.3) .592(17.6) AC AC - .732(18.6) .732(18.6) .692(17.6) .692(17.6) 0.094(2.4)DIA. .042(1.07) .25(6.35) 0.034(.86) 0.030(.76) .038(.97) 1.25 (31.8) MIN. .840(21.3) MECHANICAL DATA • • 1.135(28.8) 1.115(28.3) 0.310(7.87) .740(18.8) .310(7.87) 0.290(7.36) .290(7.36) Case:Epoxy, Molded Plastic with integrally mounted heatsink Terminals: Plated 0.25”(6.35mm) lug or plated 0.040” (1.02mm) diameter lead Polarity: Polarity symbols market on case Mounting: Thru hole for #10 screw, 20 in-lbs Torque max. See Note 3 Weight: 0.53 ounce, 15.0 gram-GBPC15 and GBPC15-W .220(5.59) .220(5.59) .100(5.08) 0.200(5.08) HOLE FOR #10 SCREW METAL HEAT SINK HOLE FOR #10 SCREW METAL HEAT SINK Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS GBPC GBPC Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (SEE FIG.1) at TC=55℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 7.5A TA = 25℃ Maximum DC Reverse Current at rated DC blocking Voltage per element T = 125℃ A Isolation Voltage from case to lug or lead Typical Junction Capacitance per leg (NOTE 1) Typical Thermal Resistance per leg (NOTE 2) Operating Junction Temperature Storage Temperature Range VRRM VRMS VDC GBPC GBPC GBPC GBPC GBPC 15005/W 1501/W 1502/W 1504/W 1506/W 1508/W 1510/W 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts I(AV) 15 Amps IFSM 300 Amps I2 t 375 A2s VF 1.1 Volts 5.0 500 2500 300 1.9 (-55 to +150) (-55 to +150) µA IR VISO Cj RΘJC TJ TSTG Notes: 1. 2. 3. UNIT Measured at 1.0MHz and applied reverse voltage of 4.0V Thermal resistance from junction to case per leg Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw. E-mail: [email protected] Web Site: www.cnmic.com nS pF ℃/W ℃ ℃ GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC15005/W THRU GBPC1510/W VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Ampere RATINGS AND CHARACTERISTICS CURVES GBPC15005/W THRU GBPC1510/W FIG. 1 - MAXIMUM OUTPUT RECTIFIED CURRENT FIG. 2 - MAXIMUM OUTPUT RECTIFIED CURRENT 40 6"×2.2"×2.2" AL. Finned Plate 35 AVERAGE FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 40 30 25 20 15 10 60 Hz resistive DR inductive lead 5 0 0 25 50 75 100 125 150 30 25 20 15 10 GBPC12 RthS-A=1.0℃/V 5 0 175 60Hz Resistive or Inductive Load 35 0 10 CASE TEMPERATURE (℃) 30 50 60 70 80 90 FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 80 PEAK FORWARD SURGE CURRENT,(A) 500 70 Capacitive Load 60 50 T J =T j max 40 30 Resistive or Inductive Load 20 0.5Single Sine-Wave (JEDEC Method ) T J =Tj max 100 1 CYCLE 10 1 0 40 AMBIENT TEMPERATURE, (℃) FIG. 3- MAXIMUM POWER DISSIPATION AVERAGE POWER DISSIPATION OF BRIDGE(W) 20 0 10 20 30 40 10 NUMBER OF CYCLES AT 60 Hz AVERAGE OUTPUT CURRENT (A) E-mail: [email protected] Web Site: www.cnmic.com 100 100 GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC15005/W THRU GBPC1510/W VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Ampere RATINGS AND CHARACTERISTIC CURVES GBPC15005/W THRU GBPC1510/W FIG. 6 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 100 10 INSTANTANEOUS REVERSE LEAKAGE CURRENT(μ A) INSTANTANEOUS FORWARD CURRENT (A) FIG. 5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG TJ =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 T J =125℃ 100 TJ =150 ℃ 10 1 50-400V 600-1000V TJ =25℃ 0.1 0.01 0 100 FIG .8 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG. 7 - TYPICAL JUNCTION CAPACITANCE PER LEG 1000 600 TRANSIENT THERMAL IMPEDANCE, (℃ /W) TJ =25 ℃ f=1.0 MHz Vsig=50mVp-p JUNCTION CAPACITANCE, (pF) 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (V) 100 50 60 40 20 TJ =25℃ f=1.0 MHz Vsig=50mVp-p 100 10 1 1 10 100 0.01 0.1 t, HEATING TIME, sec. REVERSE VOLTAGE,(V) E-mail: [email protected] 1 Web Site: www.cnmic.com 10 100