A Product Line of Diodes Incorporated Green FZT857 300V NPN MEDIUM POWER TRANSISTOR IN SOT223 Features Mechanical Data BVCEO > 300V IC = 3.5A High Continuous Collector Current Case Material: Molded Plastic. “Green” Molding Compound. ICM = 5A Peak Pulse Current UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Very Low Saturation Voltage VCE(sat) < 155mV @ 1A RCE(sat) = 87mΩ for a Low Equivalent On-Resistance hFE Specified Up to 3A for a High Gain Hold Up Case: SOT223 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Complementary PNP Type: FZT957 Lead-Free Finish; RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) Weight: 0.112 grams (approximate) C SOT223 B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Product FZT857TA FZT857QTA Notes: Compliance AEC-Q101 Automotive Marking FZT857 FZT857 Reel size (inches) 7 7 Tape width (mm) 12 12 Quantity per reel 1,000 1,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information FZT 651 857 FZT857 Document Number DS33177 Rev. 6 - 2 FZT857 = Product Type Marking Code 1 of 7 www.diodes.com February 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FZT857 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value 350 300 7 3.5 5 Unit V V V A A Value 3.0 24 1.6 12.8 42 78 8.84 -55 to +150 Unit Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Linear derating factor Thermal Resistance, Junction to Ambient Thermal Resistance Junction to Lead Operating and Storage Temperature Range Symbol (Note 6) (Note 7) (Note 6) (Note 7) (Note 8) PD RJA RJA RJL TJ, TSTG W mW/°C °C/W °C ESD Ratings (Note 9) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value ≥ 8,000 ≥ 400 Unit V V JEDEC Class 3B C 6. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; device measured when operating in steady state condition. 7. Same as note (6), except the device is mounted on 50mm X 50mm single sided 2oz weight copper. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FZT857 Document Number DS33177 Rev. 6 - 2 2 of 7 www.diodes.com February 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FZT857 VCE(sat) 10 Limit DC 1 1s 100ms 100m 10ms Single Pulse Tamb=25°C 10m 100m 1ms 52mmX52mm Single sided 2oz Cu 100µs 1 10 VCE Collector-Emitter Voltage (V) 100 3.0 Max Power Dissipation (W) IC Collector Current (A) Thermal Characteristics and Derating Information 2.5 52mmX52mm Single sided 2oz Cu 2.0 1.5 1.0 25mmX25mm Single sided 1oz Cu 0.5 0.0 0 20 52mmX52mm Single sided 2oz Cu 40 30 D=0.5 20 Single Pulse D=0.2 10 0 100µ D=0.05 D=0.1 1m 10m 100m 1 Pulse Width (s) 10 Document Number DS33177 Rev. 6 - 2 80 100 120 140 160 100 1k Single Pulse T amb=25°C 100 Transient Thermal Impedance FZT857 60 Temperature (°C) Derating Curve Max Power Dissipation (W) Thermal Resistance (°C/W) Safe Operating Area 40 3 of 7 www.diodes.com 52mmX52mm Single sided 2oz Cu 10 1 100µ 1m 10m 100m 1 10 Pulse Width (s) 100 1k Pulse Power Dissipation February 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FZT857 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 10) Emitter-Base Breakdown Voltage Symbol BVCBO BVCER BVCEO BVEBO Min 350 350 300 7 Max 50 1 Unit V V V V Typ 475 475 350 8 <1 Collector Cut-off Current ICBO Collector Cut-off Current ICER <1 <1 200 200 25 15 59 95 180 300 1020 940 50 1 10 300 100 155 230 345 1250 1120 nA µA nA Emitter Cut-off Current IEBO DC Current Gain (Note 10) hFE nA µA Collector-Emitter Saturation Voltage (Note 10) VCE(sat) Base-Emitter Saturation Voltage (Note 10) Base-Emitter Turn-On Voltage (Note 10) VBE(sat) VBE(on) 100 100 15 Current Gain-Bandwidth Product (Note 10) fT 80 MHz Cobo ton toff 21 100 5300 pF Output Capacitance (Note 10) Switching Times Note: mV mV mV ns Test Condition IC = 100µA IC = 1µA, RB ≤ 1kΩ IC = 1mA IE = 100µA VCB = 300V VCB = 300V, TA = +100°C VCB = 300V, RB ≤ 1kΩ VCB = 300V, TA = +100°C VEB = 6V IC = 10mA, VCE = 5V IC = 500mA, VCE = 10V IC = 2A, VCE = 10V IC = 3A, VCE = 10V IC = 500mA, IB = 50mA IC = 1A, IB = 100mA IC = 2A, IB = 200mA IC = 3.5A, IB = 600mA IC = 3.5A, IB = 600mA IC = 3.5A, VCE = 10V IC = 100mA, VCE = 10V, f = 50MHz VCB = 20V, f = 1MHz IC = 250mA, VCC = 50V, IB1 = -IB2 = 25mA 10. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2% FZT857 Document Number DS33177 Rev. 6 - 2 4 of 7 www.diodes.com February 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FZT857 Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) 1 VCE=10V IC/IB=10 150°C 150°C 200 100°C VCE(sat) (V) Current Gain 250 150 25°C 100 100°C 0.1 25°C -55°C -55°C 50 0 1m 10m 100m 0.01 1m 1 IC Collector Current (A) 10m 1 VCE(sat) v IC hFE v IC 1.0 1.0 -55°C 0.8 VBE(on) (V) VBE(sat) (V) 100m IC Collector Current (A) 25°C 0.6 100°C 0.4 0.8 -55°C 0.6 25°C 0.4 IC/IB=10 150°C 0.2 1m 100°C 10m 100m 0.2 1m 1 IC Collector Current (A) VBE(sat) v IC VCE=10V 150°C 10m 100m 1 IC Collector Current (A) VBE(on) v IC 1.5 IC/IB=10 1.0 IC/IB=50 IC/IB=5 0.5 T = 25°C 0.0 0 1 2 3 4 IC Collector Current (A) 5 Cibo 100 Cobo 10 10m VCE(sat) v Gain FZT857 Document Number DS33177 Rev. 6 - 2 f = 1MHz 1000 Capacitance (pF) VCE(sat) (V) IC/IB=20 100m 1 Voltage(V) 10 100 Capacitance v Voltage 5 of 7 www.diodes.com February 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FZT857 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e — — 4.60 e1 — — 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm A A1 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 Y1 C1 Y2 X2 FZT857 Document Number DS33177 Rev. 6 - 2 Dimensions X1 X2 Y1 Y2 C1 C2 Value (in mm) 3.3 1.2 1.6 1.6 6.4 2.3 C2 6 of 7 www.diodes.com February 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FZT857 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com FZT857 Document Number DS33177 Rev. 6 - 2 7 of 7 www.diodes.com February 2013 © Diodes Incorporated