EB52E8 Series • RoHS Compliant (Pb-free) • Temperature Compensated Crystal Oscillator (TCXO) • HCMOS Output • 3.3V Supply Voltage • Ceramic 10-Pad SMD Package • Stability to 0.5ppm • External Voltage Control Option Available EB52E8 H 2.0 L 7.0 W 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency (MHz) 6.000, 6.144, 6.400, 6.500, 8.000, 8.192, 9.216, 9.600, 9.720, 10.000, 12.000, 12.288, 12.800, 13.000, 14.400 vs. Operating Temperature Range (VDD = 3.3VDC, VC = 1.65VDC) See Part Numbering Guide Frequency Stability vs. Frequency Tolerance (25°C ±2°C, VDD = 3.3VDC, VC = 1.65VDC) ±1.0ppm Maximum vs. Input Voltage (±5%) ±0.3ppm Maximum vs. Load (±10%) ±0.3ppm Maximum vs. Aging (at 25°C) ±1ppm / Year Maximum See Part Numbering Guide Operating Temperature Range 3.3VDC ±5% Supply Voltage (VDD) 10mA Maximum Input Current IOH = -4mA 90% of VDD Minimum Output Voltage Logic High (VOH) IOL = +4mA 10% of VDD Maximum Output Voltage Logic Low (VOL) Measured at 20% to 80% of Waveform 5nSec Maximum Rise/Fall Time Measured at 50% of Waveform 50 ±5(%) Maximum Duty Cycle 15pF HCMOS Load Load Drive Capability ±5ppm Minimum External Trim (Control Voltage Option) 1.65VDC ±1.65VDC; Positive Transfer Characteristic 0.0VDC to VDD Control Voltage Range 5% Maximum Linearity 100kOhms Minimum Input Impedance At offset of 10Hz -80dBc/Hz Typical Phase Noise (at At offset of 100Hz -115dBc/Hz 12.800MHz) At offset of 1kHz -135dBc/Hz -145dBc/Hz At offset of >10kHz Enables Output Tri-State Input Voltage (VIH and VIL) No Connect +0.9VDD Minimum Enables Output +0.1VDD Maximum Disables Output: High Impedance 1pSec Maximum FJ = 12kHz to 20MHz RMS Phase Jitter 5mSec Maximum Start Up Time -40°C to 125°C Storage Temperature Range MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EB52E8 CERAMIC 3.3V OS5P 09/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EB52E8 C 2 V - 13.000M TR OPERATING TEMPERATURE RANGE C=-20°C to 70°C E=-40°C to 85°C PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel FREQUENCY STABILITY 2 = ±0.5ppm Maximum 3 = ±1.0ppm Maximum 4 = ±1.5ppm Maximum 5 = ±2.0ppm Maximum 6 = ±2.5ppm Maximum FREQUENCY EXTERNAL TRIM N=None (No Connection on Pad 10) V=Voltage Control MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS 2.00 MAX 5.00 ±0.10 0.40 ±0.10 MARKING ORIENTATION 7.00 ±0.10 2.54 1.00 ±0.10 (x5) 0.80 ±0.10 (x4) 4 5 3 2 6 7 8 1 1.27 ±0.10 (x4) 1.00 ±0.10 (x4) 10 0.60 ±0.10 (x6) 9 2.54 ±0.10 (x2) 0.80 ±0.10 1.4 (x4) Pin 1-3: Do Not Connect Pin 4: Ground Pin 5: Output Pin 6-7: Do Not Connect Pin 8: Tri-State Pin 9: Supply Voltage Pin 10: No Connect or Voltage Control 1.3 1.4 6.0 1.0 1.8 Solder Land (x5) 1.2 (x4) Tolerances= +0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING ORIENTATION TAPE F 8.0±0.1 A B C D E 16.0±0.2 7.5±0.1 6.75±0.1 4.0±0.1 2.0±0.1 G H B0* 1.5 +0.1-0.0 F M N 1.5 MIN 50 MIN REEL O P 20.2 MIN 13.0±0.2 J K L R S T U V A0* 0.32 ±0.05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 Q 40 MIN QTY/REEL 1,000 *Compliant to EIA 481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2003 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 1: E XX.XXX Frequency in MHz (5 Digits Maximum + Decimal) Line 2: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EB52E8 CERAMIC 3.3V OS5P 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 09/07 Specifications subject to change without notice.