MMD MVIH502527PCXT 5mm x 7mm hcmos vcxo Datasheet

MVIH Series – 5mm x 7mm HCMOS VCXO
¾
Hermetically Sealed Ceramic SMD Package
¾
+2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage
¾
Tape and Reel Available
¾
RoHS Compliant
ELECTRICAL SPECIFICATIONS:
Supply Voltage (Vdd)
Frequency Range
Frequency Stability at +25°C
Frequency Stability (Inclusive of Temp., Load,
Voltage and Aging)
Operating Temp.Range
Storage Temp. Range
Supply Current
Load
Output
Logic “0”
Logic “1”
Symmetry (50% of waveform)
Rise / Fall Time (10% to 90%)
Start Time
Control Voltage
Linearity
Pullability
+2.5VDC ±10%
+3.3DC ±10%
1.544MHZ TO 180.000MHZ
±10 ppm
+5.0VDC ±10%
1.544MHZ TO 50.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-40°C to +85°C
60mA max
30pF
HCMOS
10% Vdd max
90% Vdd min
40%/60%
10nSec max
10mSec max
1.65 VDC ±1.50 VDC
(See Part Number Guide for Options)
(See Part Number Guide for Options)
60mA max
15pF
1.25 VDC ±1.00 VDC
85mA max
30pF
2.50 VDC ±2.00 VDC
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS:
Shock
Solderability
Vibration
Reflow Solderability
Gross Leak Test
Fine Leak Test
MIL-STD-883, Meth 2002, Cond
MIL-STD-883, Meth 2003
MIL-STD-883, Meth 2007, Cond
260°C for 10 seconds
MIL-STD-883, Meth 1014, Cond
MIL-STD-883, Meth 1014, Cond
B
A
C
A
MECHANICAL DIMENSIONS:
7.20 [.283]
MAX
1.70 [.067]
MAX
2.54 [.100]
5.20 [.205]
MAX
2.54 [.100]
4
5
6
3
2
1
2.54 [.100]
4.20 [.165]
2.40 [.094]
1.30 [.051]
2.00 [.079]
1.40 [.055]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR RECOMMENDED
2.54 [.100]
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN CONNECTIONS
VOLTAGE CONTROL
TRI-STATE OR NO CONNECTION
CASE GROUND
OUTPUT
TRI-STATE OR NO CONNECTION
SUPPLY VOLTAGE
1.80 [.071]
RECOMMENDED
LAND PATTERN
PART NUMBERING GUIDE:
MVI
Frequency
H
5 x 7 Ceramic SM VCXO 6 Pads
Supply Voltage
Output
H = HCMOS
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Frequency
Stability
010 = ±10 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Linearity
Pullability
D = ±50 ppm min
P = ±80 ppm min
C = ±100 ppm min
Blank = ±20% max
X = ±5% max
Y = ±10% max
Z = ±15% max
Pin 2 & 5 Connection
Blank = Pins 2 & 5 = N/C
H = Pin 2-Tri-state, Pin 5-N/C
T = Pins 2 & 5 = Tri-state
Packaging
Blank = Bulk
T = Tape and Reel
Please Consult with MMD Sales Deparment for any other Parameters or Options
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision MVIH032807K
Similar pages