KEMET Part Number: ELH228M200AT6AA Aluminum Electrolytic, 85C, ELH, 2200 uF, 20%, 200 V, -25/+85C General Information Full Plastic Sleeve Insulation L Dielectric: Series: Description: D Aluminum Electrolytic ELH Snap-In, Aluminum Electrolytic RoHS: Yes Lead: 2 Pin LL Specifications S F PCB Layout Capacitance: Capacitance Tolerance: Voltage DC: Dimensions D 35mm +/-1mm L 50mm +/-2mm S 10mm +/-0.5mm LL 5.8mm +/-1mm F 2mm +/-0.1mm 2200 uF 20% 200 VDC, 250 VDC (Surge) Temperature Range: -25/+85C Rated Temperature: 85C Life: Dissipation Factor: Resistance: Current: Leakage Current: 2000 Hrs 15% 54 mOhms (20kHz 25C) 4950 mAmps (120Hz) 3000 uAmps (5min 20C) Packaging Specifications Packaging: Bulk Packaging Quantity: 200 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Generated 6/15/2017 - 1ced05ea-de88-45f2-be7b-b61284e8364b © 2006 - 2017 IntelliData.net