SEMICONDUCTOR MB6S TECHNICAL DATA Single-Phase Bridge Rectifiers FEATURES ·Plastic package has Underwriters Laboratory flammability Classification 94V-0. ·Glass passivated chip junction. ·High surge overload rating : 35A peak. ·Saves space on printed circuit boards. ·High temperature soldering guaranteed : 260℃/10 seconds. MAXIMUM RATING (Ta=25℃) CHARACTERISTIC SYMBOL RATING UNIT repetitive peak reverse voltage VRRM 600 V RMS voltage VRMS 420 V DC blocking voltage VDC 600 V Average forward output rectified current (see Fig.1) On glass-epoxy P.C.B on aluminum substrate. IF(AV) 0.5 (Note1) 0.8 (Note2) A Peak forward surge current IFSM 35.0 A Rating for fusing (t<8.3ms) I2t 5.0 A2sec Tj, Tstg -55~150 ℃ Operating Junction and Storage Temperature Range ELECTRICAL CHARACTERISTICS (Ta=25℃) CHARACTERISTIC Forward voltage SYMBOL CONDITION VF IF=0.4A IR VR=600V Ta=25℃ Leakage current Ta=125℃ CJ Junction capacitance VR=4.0V, f=1.0MHz MIN TYP MAX UNIT - - 1.0 V - - 5.0 - - 100 - 13 - μA Rth(A) (Note1) Rth(A) Typical thermal resistance 85 Junction to ambient - 70 (Note2) Rth(L) pF Junction to lead - - ℃/W 20 (Note1) Note 1) on glass epoxy P.C.B mounted on 0.05×0.05 (1.3×1.3mm) Pads. Note 2) on aluminum substrate P.C.B with an area of 0.8×0.8 (20×20mm) mounted on 0.05×0.05 (1.3×1.3mm) solder pad. 2005. 6. 1 Revision No : 0 1/2 MB6S 2005. 6. 1 Revision No : 0 2/2