SA5V0A - SA170A 500W TRANSIENT VOLTAGE SUPPRESSOR Features · · · · · · · · Constructed with Glass Passivated Die NOT RECOMMENDED FOR NEW DESIGN SUGGESTED REPLACEMENT P6KE6V8A - P6KE200A Excellent Clamping Capability 500W Peak Pulse Power Dissipation B A Fast Response Time A 100% Tested at Rated Peak Pulse Power Voltage Range 5.0 - 170 Volts Unidirectional and Bi-directional Versions Available (Note 1) C Available in Lead Free Finish/RoHS Compliant Version (Note 3) D Mechanical Data · · Case: DO-15 · · · · · · Moisture Sensitivity: Level 1 per J-STD-020C DO-15 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Dim Min A 25.40 — B 5.50 7.62 Also Available in Lead Free Plating (Matte Tin Finish). C 0.686 0.889 Marking: Unidirectional: Type Number and Cathode Band D 2.60 3.6 Leads: Plated Leads, Solderable per MIL-STD-202, Method 208 Max All Dimensions in mm Marking Bi-directional: Type Number Only Weight: 0.4 grams (approximate) Maximum Ratings @ TA = 25°C unless otherwise specified Characteristic Peak Power Dissipation, Tp = 1.0ms (Non repetitive current pulse, derated above TA = 25°C) Steady State Power Dissipation at TL = 75°C Lead Lengths 9.5 mm (Board mounted) Peak Forward Surge Current, 8.3 Single Half Sine Wave Superimposed on Rated Load Duty Cycle = 4 pulses per minute maximum Forward Voltage @ IF = 35A 300µs Square Wave Pulse, Unidirectional Only Operating and Storage Temperature Range Notes: Symbol Value Unit Ppk 500 W Pd 1.0 W IFSM 70 A VF 3.5 V TJ, TSTG -65 to +175 °C 1. Suffix “A” denotes unidirectional, suffix “CA” denotes bi-directional device. 2. For bi-directional devices having VR of 10 volts and under, the I R limit is doubled. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21501 Rev. 12 - 3 1 of 4 www.diodes.com SA5V0A - SA170A ã Diodes Incorporated Table 1 Type Number (Suffix C = Bidirectional) (Note 1) Reverse Standoff Voltage Breakdown Voltage VBR @ It NOT RECOMMENDED FOR NEW DESIGN SUGGESTED REPLACEMENT P6KE6V8A - P6KE200A Test Current Max. Clamping Voltage @IPP Max. Reverse Max. Leakage Peak @VR Pulse Current (Note 2) Max. Voltage Temp. Variation of VBR VR (V) Min (V) Max (V) It (mA) VC (V) IPP (A) IR (mA) mV/°C SA5V0(C)A 5.0 6.40 7.00 10 9.2 54.3 600 5.0 SA6V0(C)A 6.0 6.67 7.37 10 10.3 48.5 600 5.0 SA6V5(C)A 6.5 7.22 7.98 10 11.2 44.7 400 5.0 SA7V0(C)A 7.0 7.78 8.60 10 12.0 41.7 150 6.0 SA7V5(C)A 7.5 8.33 9.21 1.0 12.9 38.8 50 7.0 SA8V0(C)A 8.0 8.89 9.83 1.0 13.6 36.7 25 7.0 SA8V5(C)A 8.5 9.44 10.4 1.0 14.4 34.7 10 8.0 SA9V0(C)A 9.0 10.0 11.1 1.0 15.4 32.5 5.0 9.0 SA10(C)A 10 11.1 12.3 1.0 17.0 29.4 3.0 10 SA11(C)A 11 12.2 13.5 1.0 18.2 27.4 3.0 11 SA12(C)A 12 13.3 14.7 1.0 19.9 25.1 3.0 12 SA13(C)A 13 14.4 15.9 1.0 21.5 23.2 3.0 13 SA14(C)A 14 15.6 17.2 1.0 23.2 21.5 3.0 14 SA15(C)A 15 16.7 18.5 1.0 24.4 20.6 3.0 16 SA16(C)A 16 17.8 19.7 1.0 26.0 19.2 3.0 17 SA17(C)A 17 18.9 20.9 1.0 27.6 18.1 3.0 19 SA18(C)A 18 20.0 22.1 1.0 29.2 17.2 3.0 20 SA20(C)A 20 22.2 24.5 1.0 32.4 15.4 3.0 23 SA22(C)A 22 24.4 26.9 1.0 35.5 14.1 3.0 25 SA24(C)A 24 26.7 29.5 1.0 38.9 12.8 3.0 28 SA26(C)A 26 28.9 31.9 1.0 42.1 11.9 3.0 30 SA28(C)A 28 31.1 34.4 1.0 45.4 11.0 3.0 31 SA30(C)A 30 33.3 36.8 1.0 48.4 10.3 3.0 36 SA33(C)A 33 36.7 40.6 1.0 53.3 9.4 3.0 39 SA36(C)A 36 40.0 44.2 1.0 58.1 8.6 3.0 41 SA40(C)A 40 44.4 49.1 1.0 64.5 7.8 3.0 46 SA43(C)A 43 47.8 52.8 1.0 69.4 7.2 3.0 50 SA45(C)A 45 50.0 55.3 1.0 72.7 6.9 3.0 52 SA48(C)A 48 53.3 58.9 1.0 77.4 6.5 3.0 56 SA51(C)A 51 56.7 62.7 1.0 82.4 6.1 3.0 61 SA54(C)A 54 60.0 66.3 1.0 87.1 5.7 3.0 65 SA58(C)A 58 64.4 71.2 1.0 93.6 5.3 3.0 70 SA60(C)A 60 66.7 73.7 1.0 96.8 5.2 3.0 71 SA64(C)A 64 71.1 78.6 1.0 103.0 4.9 3.0 76 SA70(C)A 70 77.8 86.0 1.0 113.0 4.4 3.0 85 SA75(C)A 75 83.3 92.1 1.0 121.0 4.1 3.0 91 SA78(C)A 78 86.7 95.8 1.0 126.0 4.0 3.0 95 SA85(C)A 85 94.4 104.0 1.0 137.0 3.6 3.0 103 SA90(C)A 90 100 111.0 1.0 146.0 3.4 3.0 110 SA100(C)A 100 111 123.0 1.0 162.0 3.1 3.0 123 SA110(C)A 110 122 135.0 1.0 177.0 2.8 3.0 133 SA120(C)A 120 133 147.0 1.0 193.0 2.6 3.0 146 SA130(C)A 130 144 159.0 1.0 209.0 2.4 3.0 158 SA150(C)A 150 167 185.0 1.0 243.0 2.1 3.0 184 SA160(C)A 160 178 197.0 1.0 259.0 1.9 3.0 196 SA170(C)A 170 189 209.0 1.0 275.0 1.8 3.0 208 Notes: 1. Suffix “A” denotes unidirectional, suffix “CA” denotes bi-directional device. 2. For bi-directional devices having VR of 10 volts and under, the IR limit is doubled. DS21501 Rev. 12 - 3 2 of 4 www.diodes.com SA5V0A - SA170A NOT RECOMMENDED FOR NEW DESIGN SUGGESTED REPLACEMENT P6KE6V8A - P6KE200A 10,000 Peak Value Ipp 100 CT, CAPACITANCE (pF) PEAK PULSE CURRENT - % Ipp Unidirectional Bidirectional 5,000 r 1000 Half Value I pp/2 50 VR = 0 500 100 VR = Rated Stand-off Voltage 50 10 x 1000 Wave form tp as defined by R.E.A. 0 10 0 1 2 3 5 10 t, TIME (ms) Fig. 1, Pulse Waveform 20 50 100 20 50 VR, RATED STANDOFF VOLTAGE (V) Fig. 2, Typical Total Capacitance PRSM, NON-REPETITIVE PEAK PULSE POWER (kW) 100 IMPULSE HALF SINE WAVE Tc = 25°C 10 SQ. WAVE 1.0 0.1 0.1 10 1.0 100 10000 1.0 Pd , AVERAGE POWER DISSIPATION (W) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 1000 75 50 25 10 X 1000 Waveform as defined by REA 0.75 L = 9.5 mm 0.5 0.25 0 0 0 25 50 75 100 125 150 175 200 25 50 75 100 125 150 175 200 TL , LEAD TEMPERATURE (°C) Fig. 5, Power Derating TA, AMBIENT TEMPERATURE (°C) Fig. 4, Derating Curve DS21501 Rev. 12 - 3 0 3 of 4 www.diodes.com SA5V0A - SA170A NOT RECOMMENDED FOR NEW DESIGN SUGGESTED REPLACEMENT P6KE6V8A - P6KE200A Ordering Information Notes: (Note 5) Device Packaging Shipping (Type Number)-B* DO-15 1K/Bulk (Type Number)-T* DO-15 4K/Tape & Reel, 13-inch 4. *Add "-B" or "-T" to the appropriate type number in Table 1 on Page 2. Example: 6.5V TVS = SA6V5(C)A-B. 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS21501 Rev. 12 - 3 4 of 4 www.diodes.com SA5V0A - SA170A