Surface Mount Aluminum Electrolytic Capacitors NATU Series FEATURES • EXTENDED TEMPERATURE +125OC & LONG LIFE (4,000 HOURS) • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at W.V. @ 125°C All Case Sizes: 4,000 Hours 25 ~ 35VDC 100 ~ 330μF -40 ~ +125°C ±20% (M) 0.01CV W.V. (Vdc) S.V. (Vdc) Tan δ @ 120Hz/20°C W.V. (Vdc) Z -25°C/Z +20°C Z -40°C/Z +20°C Capacitance Change Tan δ Leakage Current 25 35 32 44 0.16 0.14 25 35 2 2 3 3 Within ±30% of initial measured value Less than 300% of specified max. value Less than specified max. value STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap.(μF) Code 100 150 220 330 101 151 221 331 Working Voltage (Vdc) 25 35 8X10.8 8X10.8 10X10.8 10X10.8 - + Dφ I I - W A L 0.3mm max. P B DIMENSIONS (mm) Case Size 8 x 10.8 10 x 10.8 Dφ ±0.5 8.0 10.0 L max. 10.8 10.8 A, B ±0.2 8.3 10.3 I ±0.3 2.9 3.2 P ±0.3 3.2 4.6 W 0.7 ~ 1.0 1.0 ~ 1.4 Reflow Code L = +250°C N = +260°C Termination / Packaging Code B = Sn-Bi / 13" reel LB = Sn-Bi / 15" reel PART NUMBER SYSTEM NATU 101 M 35V 8x10.8 N B Y F Series RoHS Compliant Termination/Packaging Code: B = Sn-Bi, 13" Reel LB = Sn-Bi, 15" Reel Reflow Temperature Code Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Surface Mount Aluminum Electrolytic Capacitors NATU Series STANDARD VALUES, CASE SIZES & SPECIFICATIONS NATU151M25V8X10.8NBYF Cap. (μF) 150 NATU331M25V10X10.8LBYF 330 NATU101M35V8X10.8NBYF 100 NATU221M35V10X10.8LBYF 220 Part Number Working Voltage 25 Dissipaton Factpr @120Hz/20°C 0.16 35 Max. ESR (Ω) Max. Ripple Current (mA rms) AT 100KHz/20°C AT 100KHz/125°C 0.30 300 Load Life Hours @ +125°C 4,000 0.16 0.20 500 0.14 0.30 300 4,000 4,000 0.14 0.20 500 4,000 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency (Hz) 100μF ~ 330μF 100 < f <1K 0.6 1K < f <10K 0.85 10K < f <100K 0.93 LAND PATTERN DIMENSIONS (mm) Case Size 8x10.8 10x10.8 a 2.8 4.3 b 4.1 4.4 100K < f 1.00 a c 2.1 2.5 c b PEAK REFLOW TEMPERATURES AND DURATION Diameter 8mm φ 10mm φ Time above 200°C 80 sec. max. 70 sec. max. Time above 217°C 70 sec. max. 60 sec. max. Time above 230°C 40 sec. max. 40 sec. max. Peak Temperature 5 seconds 260°C 250°C Temperature - Deg. C Capacitors can withstand two reflow passes under the specified conditions. Capacitors must be allowed to cool to room temperature before the second reflow pass. Peak Temperature (see table) 230 Time Above 230°C (see table) 200 Time Above 217°C (see table) 150 100 Preheat - 120 seconds max. (150°C ~ 180°C) Time Above 200°C (see table) 50 Time (Seconds) Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors TR13 330mm (13") REEL TR15 380mm (15") REEL CARRIER TAPE Case Size 8x10.8 10x10.8 A ±0.2 8.7 10.7 B ±0.2 8.7 10.7 NATU Series C ±0.3 24.0 24.0 D ±0.1 11.5 11.5 P ±0.1 16.0 16.0 T ±0.2 11.1 11.2 t max. 0.6 0.6 W ±1.0 26 26 Case Size 8x10.8 10x10.8 Qty per Reel 13" (330mm) 15" (380mm) 300 500 300 500 TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 10 empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. CARRIER 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 1.75 ± t B C D 4 + 0.1 A P Feeding T REEL 2mm ± 0.5mm φ50mm min. φ13mm ± 0.5mm φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W 3mm www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3