The sub miniature ECS-2520Q is a miniature AEC-Q200 Qualified SMD HCMOS Oscillator. The 2.5 x 2.0 x 0.9 mm ceramic package is ideal for Automotive, Industrial and IOT applications. ECS-2520Q AEC-Q200 SMD OSCILLATOR OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS ECX-2520Q SMD HCMOS XO PARAMETERS CONDITIONS ECS-2520Q MIN Frequency Range Low Profile 2.5 x 2.0 mm Footprint Extended Temp Range RoHS Compliant AEC-Q200 Qualified MAX 0.750 * Frequency Stability TYP UNITS Power Supply Output Output voltage Level Rise & Fall time Duty Cycle Operating Temp* Storage Temp 60.000 MHz ±50 ppm -40 ~ +105°C (DP Opt) ±30 ppm Vdd ±5% +1.8, +2.5, +3.0, +3.3 V DC HCMOS 15 pF VOL:10%Vdd max./VOH:90%Vdd min.V DC 10%Vdd – 90%Vdd 10 ns @ ½ Vdd 45/55 % -40 +125 °C -55 +125 °C -40 ~ +125°C (BS Opt) * Frequency Stability includes initial tolerance, temperature, supply voltage & load change reflow frequency shift, and aging. CURRENT CONSUMPTION FREQ. +1.8V +2.5V +3.0V +3.3V DIMENSIONS (mm) ~ 19 MHz 2.5 4.5 5.5 6.0 ~ 39.9 MHz 3.0 5.5 6.5 7.0 mA Max ~ 50 MHz 3.5 6.5 7.5 8.0 ~ 60 MHz 4.0 7.0 8.0 8.5 PAD CONNECTIONS 1 Tri-state 2 Gnd 3 Output 4 Vdd Tri State Function Pin 1 Output High or NC Active Low High Impedance Figure 1) Top, Side, and Bottom views Figure 2) Suggested Land Pattern PART NUMBERING GUIDE: Example ECS-2520Q-33-270-BS-TR ECS - SERIES 2520Q 2.5 x 2.0 mm AEC-Q200 Oscillator Voltage 18 = +1.8V 25 = +2.5V 28 = +2.8V 33 = +3.3V FREQUENCY ABBREVIATION 270 = 27.000 MHz See Developed Frequencies Pg.2 STABILITY A= ±100 ppm B = ±50 ppm D = ±30 ppm * TEMP RANGE PACKAGING P = -40 ~ +105°C S = -40 ~ +125°C TR = Tape & Reel 1K/Reel Rev.2017 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com ECS-2520Q AEC-Q200 SMD XO DEVELOPED FREQUENCIES FREQUENCY MHz 27.000 48.000 CODE 270 480 SOLDER PROFILE Peak solder Temp +260°C Max 10 sec Max. 2 Cycles Max. MSL 1, Lead Finish Au Figure 1) Suggested Reflow Profile POCKET TAPE DIMENSIONS (mm) 15351 West 109th Street | Lenexa, KS 66219 | Phone: 913.782.7787 | Fax: 913.782.6991 | www.ecsxtal.com